We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SC2RG-[20-500/1]-[20-300/1]-[5-50/0.5]
Description
EN 1.1206 Equiv. Plates/3 Configurable Dimensions
Stock availability:
On request
If you are inspecting MISUMI SC2RG-[20-500/1]-[20-300/1]-[5-50/0.5], communicate with FAMAGA, the world's dominant retailer of mechanized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are expressed in the quality of items and particular attention to each user. We value everyone, who collaborated with us - so, our regular purchasers accept the most helpful purchase terms and discounts on the factory-made equipment market. Nowadays, there are more than 4000 such buyers, and we constantly arrange new agreements. More than 650 transactions are made per day, because FAMAGA works all over the planet Germany, United Kingdom, Botswana, Slovakia, South Africa, Sri Lanka, Jamaica, Cape Verde, Netherlands, Malaysia, Bahamas, Nicaragua, Australia, Namibia, Malawi, Slovenia, Panama, Eritrea, Jordan, Israel, Mali, Madagascar, Switzerland, Cameroon, China, Pakistan, Iceland, Guatemala, East Timor, Albania, Antigua and Barbuda, Monaco, Macedonia, Costa Rica, Djibouti, Afghanistan, Angola, Finland, Sudan, Russia, Kuwait, Greece, Morocco, Tajikistan, Dominica, Argentina, Latvia, Burkina Faso. A well-shaped logistics series and a partnership network help us to dispatch our goods anywhere in the earth promptly without damaging product quality.
A special source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the field of manufacturing equipment.
All products from FAMAGA are guaranteed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been provided, and this bulk is rising every day. We are proud that buyers choose FAMAGA again and again, and we are happy to make more developed and technologically modern industrial equipment so as not to lower the bar.
To consult or place an order, phone us or write to the online chat on our official website. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Part Number | - | A | - | B | - | T | ||||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | |||||||||
PC | F | Q | M | - | 255 | - | 220 | - | 18 |
6-Surface Finish | |||||||
Part Number | 0.5mm Increment | ||||||
Upper-Lower Finish Method | Type | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | T | |
AB | |||||||
Milled | Standard | PCF | P Q N M | P Q N M | 20~500 | 20~300 | 4~50 |
Large | L-PCF | 300.5~2000 | 100~800 | 10~50 | |||
Rotary Grinding | Standard | PCR | 20~500 | 20~300 | 4~50 | ||
Large | L-PCR | 300.5~1400 | 100~1000 | 10~50 | |||
Surface Grinding | Standard | PCS | 20~500 | 20~300 | 4~50 | ||
Large | L-PCS | 300.5~800 | 100~500 | 10~50 |
Upper-Lower Finish Method | P | Q | N | M |
Milled | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
Rotary Grinding | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
Surface Grinding | +0.1~+0.2 | 0~+0.1 | 0.05 | -0.1~0 |
A, B Dimension | P | Q | N | M |
250mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
250.5mm or More | +0.1~+0.6 | 0~+0.5 | 0.25 | -0.5~0 |
Item | Upper-Lower Finish Method | |||
Milled | Rotary Grinding | Surface Grinding | ||
Thickness Parallelism (per 100mm) | 0.05 | 0.012 | 0.012 | |
Flatness (per 100mm) | T4~7.5 | 0.1 | 0.05 | 0.05 |
T8~15.5 | 0.07 | 0.03 | 0.03 | |
T16~25.5 | 0.05 | 0.015 | 0.015 | |
T26~50 | 0.05 | 0.012 | 0.012 | |
Perpendicularity of Datum Plane | 0.015 per 100mm | |||
Circumference Chamfering | 6-Surface Finish | C0.2~C0.5 |
Item | Milled | Rotary Grinding | Surface Grinding | ||||||
A, B Dimension | ~500 | ~1000 | 1000.5~ | ~500 | ~1000 | 1000.5~ | ~500 | 500.5~ | |
Flatness (per O.A.L.) | T10~19.5 | 0.3 | 0.4 | 0.5 | 0.3 | 0.4 | 0.5 | 0.1 | 0.2 |
T20~29.5 | 0.2 | 0.3 | 0.5 | 0.2 | 0.3 | 0.5 | 0.05 | 0.1 | |
T30~50 | 0.2 | 0.3 | 0.3 | 0.2 | 0.3 | 0.3 | 0.05 | 0.1 | |
Thickness Parallelism(per 100mm) | 0.05 | 0.012 | 0.012 | ||||||
Perpendicularity of Datum Plane | 0.015 per 100mm | ||||||||
Circumference Chamfering | 6-Surface Finish | C0.2~C0.5 |