![MISUMI PSSQQ-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]](https://static-famaga.fra1.digitaloceanspaces.com/marketing/photo/nameGencAGBQK.jpeg)
We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
PSSQQ-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
Description
EN 1.0038 Equiv. Plates/3 Configurable Dimensions
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are pursuing MISUMI PSSQQ-[20-500/0.5]-[20-300/0.5]-[4-50/0.5], communicate with FAMAGA, the world's primary supplier of manufacturing equipment. Our company has operated for more than ten years - these are ages of experience, which are expressed in the quality of items and special attention to each orderer. We appreciate everyone, who joined with us - so, our regular buyers pick up the most helpful purchase conditions and discounts on the factory-made equipment market. At this moment, there are more than 4000 such purchasers, and we constantly form new agreements. More than 750 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Burkina Faso, Paraguay, Belgium, Honduras, Vietnam, Pakistan, Russia, Togo, Romania, Jamaica, Algeria, Israel, Azerbaijan, Netherlands, Cape Verde, South Sudan, Denmark, Ghana, Oman, Hungary, Suriname, Serbia, Norway, Samoa, Belarus, Argentina, Seychelles, Liberia, Guatemala, Eswatini, Zambia, Ecuador, Finland, Nepal, Cyprus, Egypt, El Salvador, Malaysia, Malta, Mauritius, Chile, Haiti, Tonga, Angola, Rwanda, Morocco, Latvia. A well-built logistics series and a partnership network cheer us to deliver our elements anywhere in the planet immediately without disreputing product quality.
A specific source of repute for FAMAGA is its employees, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the range of manufacturing equipment.
All outputs from FAMAGA are assured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this amount is increasing every day. We are glad that purchasers choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To inquire or order, phone us or write to the online chat on our official website. You can also forward a list of the required equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
| Part Number | - | A | - | B | - | T | ||||||
| Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | |||||||||
| PS | F | Q | M | - | 255 | - | 220 | - | 18 |
| 6-Surface Finish | |||||||
| Part Number | 0.5mm Increment | ||||||
| Upper-Lower Finish Method | Type | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | T | |
| AB | |||||||
| Milled | Standard | PSF | P Q N M | P Q N M | 20~500 | 20~300 | 4~50 |
| Large | L-PSF | 250~2500 | 10~1500 | 5~50 | |||
| Rotary Grinding | Standard | PSR | 20~500 | 20~300 | 4~50 | ||
| Large | L-PSR | 250~1600 | 10~1200 | 10~50 | |||
| Surface Grinding | Standard | PSS | 20~500 | 20~300 | 4~50 | ||
| Large | L-PSS | 250~800 | 20~500 | 5~50 |
| Upper-Lower Surface Finished (Sides Not Finished) Tolerance should be noted. | ||||||||||
| Part Number | 1mm Increment | 0.5mm Increment | ||||||||
| Upper-Lower Finish Method | Type | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | T | ||||
| AB | ||||||||||
| Milled | Standard | SS2F | P Q N M | A | +5 0 | B | +5 0 | 20~500 | 10~300 | 5~50 |
| Large | L-SS2F | 251~2500 | 10~1500 |
| Upper-Lower Finish Method | P | Q | N | M |
| Milled | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
| Rotary Grinding | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
| Surface Grinding | +0.1~+0.2 | 0~+0.1 | 0.05 | -0.1~0 |
| A, B Dimension | P | Q | N | M |
| 250mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
| 250.5mm or More | +0.1~+0.6 | 0~+0.5 | 0.25 | -0.5~0 |
| Item | Upper-Lower Finish Method | |||
| Milled | Rotary Grinding | Surface Grinding | ||
| Thickness Parallelism (per 100mm) | 0.05 | 0.012 | 0.012 | |
| Flatness (per 100mm) | T4~7.5 | 0.1 | 0.05 | 0.05 |
| T8~15.5 | 0.07 | 0.03 | 0.03 | |
| T16~25.5 | 0.05 | 0.015 | 0.015 | |
| T26~50 | 0.05 | 0.012 | 0.012 | |
| Perpendicularity of Datum Plane (Applicable to 6-Surface Finished Products) | 0.015 per 100mm | |||
| Circumference Chamfering | Upper-Lower Surface Finished | Deburring Only | ||
| 6-Surface Finish | C0.2~C0.5 |
| Item | Milled | Rotary Grinding | Surface Grinding | ||||||
| A, B Dimension | ~500 | ~1000 | 1000.5~ | ~500 | ~1000 | 1000.5~ | ~500 | 500.5~ | |
| Flatness (per O.A.L.) | T5~9.5 | 0.3 | 0.5 | 0.7 | 0.3 | 0.5 | 0.7 | 0.1 | 0.2 |
| T10~19.5 | 0.3 | 0.4 | 0.5 | 0.3 | 0.4 | 0.5 | 0.1 | 0.2 | |
| T20~29.5 | 0.2 | 0.3 | 0.5 | 0.2 | 0.3 | 0.5 | 0.05 | 0.1 | |
| T30~50 | 0.2 | 0.3 | 0.3 | 0.2 | 0.3 | 0.3 | 0.05 | 0.1 | |
| Thickness Parallelism (per 100mm) | 0.05 | 0.012 | 0.012 | ||||||
| Perpendicularity of Datum Plane (Applicable to 6-Surface Finished Products) | 0.015 per 100mm | ||||||||
| Circumference Chamfering | Upper-Lower Surface Finished | Deburring Only | |||||||
| 6-Surface Finish | C0.2~C0.5 |
