We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
PSSPN-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
Description
EN 1.0038 Equiv. Plates/3 Configurable Dimensions
Stock availability:
On request
If you are questing MISUMI PSSPN-[20-500/0.5]-[20-300/0.5]-[4-50/0.5], reach FAMAGA, the world's principle producer of machine made equipment. Our company has worked for more than ten years - these are ages of experience, which are depicted in the quality of outcomes and individual attention to each buyer. We understand everyone, who liased with us - so, our regular clients get the most acceptable purchase conditions and discounts on the factory-made equipment market. At this moment, there are more than 4000 such buyers, and we constantly arrange new agreements. More than 750 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Mozambique, Ghana, Guinea, Singapore, Togo, United States, The Gambia, Cape Verde, Japan, Malaysia, Bosnia and Herzegovina, Czech Republic, Burundi, The Bahamas, Serbia, Angola, Norway, Senegal, Eritrea, Kyrgyzstan, Syria, Finland, Macedonia, Benin, Poland, Niger, Afghanistan, Turkmenistan, Belarus, Kenya, Mali, Jordan, Botswana, Sweden, Vietnam, Burkina Faso, Georgia, Panama, Andorra, Zimbabwe, Rwanda, El Salvador, Eswatini, Jamaica, Libya, Dominica, Brunei. A well-developed logistics network and a partnership network cheer us to ship our elements anywhere in the planet immediately without compromising product quality.
A specific source of honor for FAMAGA is its personnel, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the range of manufacturing equipment.
All outcomes from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been provided, and this number is ascending every day. We are glad that purchasers choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To get some advice or order, phone us or write to the online chat on our official website. You can also forward a list of the required equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Part Number | - | A | - | B | - | T | ||||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | |||||||||
PS | F | Q | M | - | 255 | - | 220 | - | 18 |
6-Surface Finish | |||||||
Part Number | 0.5mm Increment | ||||||
Upper-Lower Finish Method | Type | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | T | |
AB | |||||||
Milled | Standard | PSF | P Q N M | P Q N M | 20~500 | 20~300 | 4~50 |
Large | L-PSF | 250~2500 | 10~1500 | 5~50 | |||
Rotary Grinding | Standard | PSR | 20~500 | 20~300 | 4~50 | ||
Large | L-PSR | 250~1600 | 10~1200 | 10~50 | |||
Surface Grinding | Standard | PSS | 20~500 | 20~300 | 4~50 | ||
Large | L-PSS | 250~800 | 20~500 | 5~50 |
Upper-Lower Surface Finished (Sides Not Finished) Tolerance should be noted. | ||||||||||
Part Number | 1mm Increment | 0.5mm Increment | ||||||||
Upper-Lower Finish Method | Type | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | T | ||||
AB | ||||||||||
Milled | Standard | SS2F | P Q N M | A | +5 0 | B | +5 0 | 20~500 | 10~300 | 5~50 |
Large | L-SS2F | 251~2500 | 10~1500 |
Upper-Lower Finish Method | P | Q | N | M |
Milled | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
Rotary Grinding | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
Surface Grinding | +0.1~+0.2 | 0~+0.1 | 0.05 | -0.1~0 |
A, B Dimension | P | Q | N | M |
250mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
250.5mm or More | +0.1~+0.6 | 0~+0.5 | 0.25 | -0.5~0 |
Item | Upper-Lower Finish Method | |||
Milled | Rotary Grinding | Surface Grinding | ||
Thickness Parallelism (per 100mm) | 0.05 | 0.012 | 0.012 | |
Flatness (per 100mm) | T4~7.5 | 0.1 | 0.05 | 0.05 |
T8~15.5 | 0.07 | 0.03 | 0.03 | |
T16~25.5 | 0.05 | 0.015 | 0.015 | |
T26~50 | 0.05 | 0.012 | 0.012 | |
Perpendicularity of Datum Plane (Applicable to 6-Surface Finished Products) | 0.015 per 100mm | |||
Circumference Chamfering | Upper-Lower Surface Finished | Deburring Only | ||
6-Surface Finish | C0.2~C0.5 |
Item | Milled | Rotary Grinding | Surface Grinding | ||||||
A, B Dimension | ~500 | ~1000 | 1000.5~ | ~500 | ~1000 | 1000.5~ | ~500 | 500.5~ | |
Flatness (per O.A.L.) | T5~9.5 | 0.3 | 0.5 | 0.7 | 0.3 | 0.5 | 0.7 | 0.1 | 0.2 |
T10~19.5 | 0.3 | 0.4 | 0.5 | 0.3 | 0.4 | 0.5 | 0.1 | 0.2 | |
T20~29.5 | 0.2 | 0.3 | 0.5 | 0.2 | 0.3 | 0.5 | 0.05 | 0.1 | |
T30~50 | 0.2 | 0.3 | 0.3 | 0.2 | 0.3 | 0.3 | 0.05 | 0.1 | |
Thickness Parallelism (per 100mm) | 0.05 | 0.012 | 0.012 | ||||||
Perpendicularity of Datum Plane (Applicable to 6-Surface Finished Products) | 0.015 per 100mm | ||||||||
Circumference Chamfering | Upper-Lower Surface Finished | Deburring Only | |||||||
6-Surface Finish | C0.2~C0.5 |