We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
PSRQN-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
Description
EN 1.0038 Equiv. Plates/3 Configurable Dimensions
Stock availability:
On request
If you are looking for MISUMI PSRQN-[20-500/0.5]-[20-300/0.5]-[4-50/0.5], reach FAMAGA, the world's main company of industrial equipment. Our company has advanced for more than ten years - these are ages of experience, which are depicted in the quality of outcomes and personalseparate attention to each customer. We understand everyone, who worked with us - so, our regular customers bring in the most acceptable purchase conditions and discounts on the factory-made equipment market. At this moment, there are more than 4000 such consumers, and we constantly compose new agreements. More than 750 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Madagascar, Iran, The Bahamas, Serbia, Burkina Faso, Qatar, Finland, South Sudan, Switzerland, Honduras, Montenegro, North Korea, El Salvador, Botswana, Malaysia, Armenia, Uruguay, Nicaragua, Ghana, Tajikistan, Ireland, Mongolia, Belarus, Liberia, Latvia, Kyrgyzstan, Swaziland, Jordan, Comoros, Nigeria, Slovakia, Tonga, Mauritania, Haiti, Cape Verde, Mexico, Cyprus, Djibouti, Ukraine, Georgia, Kazakhstan, Croatia, Kiribati, Panama, Bulgaria, Zimbabwe, Suriname. A well-elaborated logistics connection and a partnership network cheer us to conduct our elements anywhere in the planet immediately without discrediting product quality.
A specific source of dignity for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the range of manufacturing equipment.
All spare parts from FAMAGA are guaranteed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been provided, and this amount is amounting every day. We are pleased that purchasers choose FAMAGA again and again, and we are glad to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To request or order, phone us or write to the online chat on our official website. You can also forward a list of the required equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Part Number | - | A | - | B | - | T | ||||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | |||||||||
PS | F | Q | M | - | 255 | - | 220 | - | 18 |
6-Surface Finish | |||||||
Part Number | 0.5mm Increment | ||||||
Upper-Lower Finish Method | Type | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | T | |
AB | |||||||
Milled | Standard | PSF | P Q N M | P Q N M | 20~500 | 20~300 | 4~50 |
Large | L-PSF | 250~2500 | 10~1500 | 5~50 | |||
Rotary Grinding | Standard | PSR | 20~500 | 20~300 | 4~50 | ||
Large | L-PSR | 250~1600 | 10~1200 | 10~50 | |||
Surface Grinding | Standard | PSS | 20~500 | 20~300 | 4~50 | ||
Large | L-PSS | 250~800 | 20~500 | 5~50 |
Upper-Lower Surface Finished (Sides Not Finished) Tolerance should be noted. | ||||||||||
Part Number | 1mm Increment | 0.5mm Increment | ||||||||
Upper-Lower Finish Method | Type | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | T | ||||
AB | ||||||||||
Milled | Standard | SS2F | P Q N M | A | +5 0 | B | +5 0 | 20~500 | 10~300 | 5~50 |
Large | L-SS2F | 251~2500 | 10~1500 |
Upper-Lower Finish Method | P | Q | N | M |
Milled | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
Rotary Grinding | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
Surface Grinding | +0.1~+0.2 | 0~+0.1 | 0.05 | -0.1~0 |
A, B Dimension | P | Q | N | M |
250mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
250.5mm or More | +0.1~+0.6 | 0~+0.5 | 0.25 | -0.5~0 |
Item | Upper-Lower Finish Method | |||
Milled | Rotary Grinding | Surface Grinding | ||
Thickness Parallelism (per 100mm) | 0.05 | 0.012 | 0.012 | |
Flatness (per 100mm) | T4~7.5 | 0.1 | 0.05 | 0.05 |
T8~15.5 | 0.07 | 0.03 | 0.03 | |
T16~25.5 | 0.05 | 0.015 | 0.015 | |
T26~50 | 0.05 | 0.012 | 0.012 | |
Perpendicularity of Datum Plane (Applicable to 6-Surface Finished Products) | 0.015 per 100mm | |||
Circumference Chamfering | Upper-Lower Surface Finished | Deburring Only | ||
6-Surface Finish | C0.2~C0.5 |
Item | Milled | Rotary Grinding | Surface Grinding | ||||||
A, B Dimension | ~500 | ~1000 | 1000.5~ | ~500 | ~1000 | 1000.5~ | ~500 | 500.5~ | |
Flatness (per O.A.L.) | T5~9.5 | 0.3 | 0.5 | 0.7 | 0.3 | 0.5 | 0.7 | 0.1 | 0.2 |
T10~19.5 | 0.3 | 0.4 | 0.5 | 0.3 | 0.4 | 0.5 | 0.1 | 0.2 | |
T20~29.5 | 0.2 | 0.3 | 0.5 | 0.2 | 0.3 | 0.5 | 0.05 | 0.1 | |
T30~50 | 0.2 | 0.3 | 0.3 | 0.2 | 0.3 | 0.3 | 0.05 | 0.1 | |
Thickness Parallelism (per 100mm) | 0.05 | 0.012 | 0.012 | ||||||
Perpendicularity of Datum Plane (Applicable to 6-Surface Finished Products) | 0.015 per 100mm | ||||||||
Circumference Chamfering | Upper-Lower Surface Finished | Deburring Only | |||||||
6-Surface Finish | C0.2~C0.5 |