We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
PSRPQ-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
Description
EN 1.0038 Equiv. Plates/3 Configurable Dimensions
Stock availability:
On request
If you are pursuing MISUMI PSRPQ-[20-500/0.5]-[20-300/0.5]-[4-50/0.5], communicate with FAMAGA, the world's principle producer of machine made equipment. Our company has worked for more than ten years - these are years of experience, which are expressed in the quality of items and special attention to each buyer. We appreciate everyone, who liased with us - so, our regular buyers get the most helpful purchase forms and discounts on the factory-made equipment market. At this time, there are more than 4000 such purchasers, and we constantly form new agreements. More than 750 contracts are concluded per day, because FAMAGA operates all over the globe Germany, United Kingdom, Indonesia, Australia, Guyana, Peru, South Korea, Cyprus, Samoa, Russia, Bolivia, Canada, Bulgaria, Tonga, Angola, Benin, Qatar, Nigeria, Central African Republic, Fiji, Montenegro, Guinea, Guatemala, Laos, Burkina Faso, Gambia, Madagascar, Czech Republic, Kuwait, Antigua and Barbuda, Mexico, Iceland, Chile, Andorra, Belarus, Zimbabwe, Estonia, Afghanistan, Panama, China, Macedonia, Jamaica, Ghana, Malaysia, India, United Arab Emirates, Senegal, Tajikistan, Sweden. A well-built logistics network and a partnership network help us to deliver our goods anywhere in the planet with no delay without disreputing product quality.
A special source of repute for FAMAGA is its employees, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the range of manufacturing equipment.
All outcomes from FAMAGA are assured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this number is increasing every day. We are pleased that consumers choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To inquire or order, phone us or write a message to the online chat on our official website. You can also forward a list of the required equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Part Number | - | A | - | B | - | T | ||||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | |||||||||
PS | F | Q | M | - | 255 | - | 220 | - | 18 |
6-Surface Finish | |||||||
Part Number | 0.5mm Increment | ||||||
Upper-Lower Finish Method | Type | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | T | |
AB | |||||||
Milled | Standard | PSF | P Q N M | P Q N M | 20~500 | 20~300 | 4~50 |
Large | L-PSF | 250~2500 | 10~1500 | 5~50 | |||
Rotary Grinding | Standard | PSR | 20~500 | 20~300 | 4~50 | ||
Large | L-PSR | 250~1600 | 10~1200 | 10~50 | |||
Surface Grinding | Standard | PSS | 20~500 | 20~300 | 4~50 | ||
Large | L-PSS | 250~800 | 20~500 | 5~50 |
Upper-Lower Surface Finished (Sides Not Finished) Tolerance should be noted. | ||||||||||
Part Number | 1mm Increment | 0.5mm Increment | ||||||||
Upper-Lower Finish Method | Type | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | T | ||||
AB | ||||||||||
Milled | Standard | SS2F | P Q N M | A | +5 0 | B | +5 0 | 20~500 | 10~300 | 5~50 |
Large | L-SS2F | 251~2500 | 10~1500 |
Upper-Lower Finish Method | P | Q | N | M |
Milled | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
Rotary Grinding | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
Surface Grinding | +0.1~+0.2 | 0~+0.1 | 0.05 | -0.1~0 |
A, B Dimension | P | Q | N | M |
250mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
250.5mm or More | +0.1~+0.6 | 0~+0.5 | 0.25 | -0.5~0 |
Item | Upper-Lower Finish Method | |||
Milled | Rotary Grinding | Surface Grinding | ||
Thickness Parallelism (per 100mm) | 0.05 | 0.012 | 0.012 | |
Flatness (per 100mm) | T4~7.5 | 0.1 | 0.05 | 0.05 |
T8~15.5 | 0.07 | 0.03 | 0.03 | |
T16~25.5 | 0.05 | 0.015 | 0.015 | |
T26~50 | 0.05 | 0.012 | 0.012 | |
Perpendicularity of Datum Plane (Applicable to 6-Surface Finished Products) | 0.015 per 100mm | |||
Circumference Chamfering | Upper-Lower Surface Finished | Deburring Only | ||
6-Surface Finish | C0.2~C0.5 |
Item | Milled | Rotary Grinding | Surface Grinding | ||||||
A, B Dimension | ~500 | ~1000 | 1000.5~ | ~500 | ~1000 | 1000.5~ | ~500 | 500.5~ | |
Flatness (per O.A.L.) | T5~9.5 | 0.3 | 0.5 | 0.7 | 0.3 | 0.5 | 0.7 | 0.1 | 0.2 |
T10~19.5 | 0.3 | 0.4 | 0.5 | 0.3 | 0.4 | 0.5 | 0.1 | 0.2 | |
T20~29.5 | 0.2 | 0.3 | 0.5 | 0.2 | 0.3 | 0.5 | 0.05 | 0.1 | |
T30~50 | 0.2 | 0.3 | 0.3 | 0.2 | 0.3 | 0.3 | 0.05 | 0.1 | |
Thickness Parallelism (per 100mm) | 0.05 | 0.012 | 0.012 | ||||||
Perpendicularity of Datum Plane (Applicable to 6-Surface Finished Products) | 0.015 per 100mm | ||||||||
Circumference Chamfering | Upper-Lower Surface Finished | Deburring Only | |||||||
6-Surface Finish | C0.2~C0.5 |