We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
PDSPP-[25-500/0.5]-[10-300/0.5]-[5-49/0.5]
Description
EN AW-2017 Equiv./Duralumin Plates/3 Configurable Dimensions
Stock availability:
On request
If you are questing MISUMI PDSPP-[25-500/0.5]-[10-300/0.5]-[5-49/0.5], communicate with FAMAGA, the world's central vendor of streamlined equipment. Our company has lasted for more than ten years - these are cycles of experience, which are expressed in the quality of outcomes and particular attention to each purchaser. We appreciate everyone, who joined with us - so, our regular purchasers procure the most favorable purchase terms and discounts on the factory-made equipment market. At present, there are more than 3500 such purchasers, and we constantly sign new agreements. More than 650 contracts are concluded per day, because FAMAGA works all over the world Germany, United Kingdom, Lebanon, Suriname, Monaco, Honduras, Mali, Liberia, Georgia, Haiti, Romania, Swaziland, Bahamas, Comoros, East Timor, Kuwait, Azerbaijan, Costa Rica, Japan, Burkina Faso, Morocco, Ghana, Malaysia, Serbia, Uganda, Nicaragua, China, Eswatini, Luxembourg, Mauritius, Bolivia, The Gambia, Central African Republic, Cyprus, Lithuania, Mauritania, Jordan, Mexico, South Korea, Norway, United States, Albania. A well-developed logistics network and a partnership network help us to conduct our units anywhere in the earth with no delay without undermining product quality.
A specific source of repute for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the field of manufacturing equipment.
All products from FAMAGA are guaranteed - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that customers choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as stay in control.
To inquire or place an order, get in touch with us or send a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Part Number | - | A | - | B | - | T | ||||||||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | |||||||||||||
PD | F | Q | M | - | 255 | - | 220 | - | 15 |
Part Number | 0.5mm Increment | T Selectable/Configurable | |||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | ||
A≥B | |||||||
Standard | PD | L (Rolled) | N | P Q N M | 25~ 500 | 10~ 300 | 5, 6, 8, 10, 12, 15, 20, 25, 30, 40, 50 |
Large | L-PD | 250~ 2500 | 20~ 1250 | 3, 4, 5, 6, 8, 10, 12, 15, 20, 25, 30, 35, 40, 45, 50 | |||
Standard | PD | F (Milled) | P Q N M | P Q N M | 25~ 500 | 10~ 300 | 5~49 (0.5mm Increment) |
Large | L-PD | 250~ 2400 | 20~ 800 | 5~50 (0.5mm Increment) | |||
Standard | PD | S (Surface Grinding) | 25~ 500 | 10~ 300 | 5~49 (0.5mm Increment) |
Upper-Lower Surface Finish | Available for N only | ||||||||||
T Dimension | |||||||||||
3 | 4, 5 | 6 | 8 | 10 | 12, 15 | 20 | 25 | 30, 35 | 40 | 45, 50 | |
L(Rolled) | 0.2 | 0.35 | 0.45 | 0.5 | 0.6 | 0.7 | 0.8 | 0.9 | 1.0 | 1.1 | 1.3 |
Upper-Lower Surface Finish | A, B Length | P | Q | N | M |
L (Rolled) F (Milled) S (Surface Grinding) | 250mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
250.5mm or More | +0.1~+0.6 | 0~+0.5 | 0.25 | -0.5~0 |
Upper-Lower Surface Finish | A, B Length | P | Q | N | M |
F (Milled) | 550mm or Less | +0.1~+0.3 | 0~0.2 | 0.1 | -0.2~0 |
550.5mm or More | +0.1~+0.4 | 0~0.3 | 0.15 | -0.3~0 | |
S (Surface Grinding) | +0.1~+0.2 | 0~0.1 | 0.05 | -0.1~0 |
Item | Upper-Lower Surface Finish | |||
L (Rolled) | F (Milled) | S (Surface Grinding) | ||
Thickness Parallelism (per 100mm) | T3~ 6.5 | - | 0.05 | 0.025 |
T7~ 12.5 | 0.03 | |||
T13~ 15.5 | 0.05 | |||
T16~ 20.5 | 0.07 | 0.07 | ||
T21~ 50 | 0.1 | 0.1 | ||
Flatness (per 100mm) | T3~ 8.5 | 0.2 | 0.15 | 0.12 |
T9~ 12.5 | 0.13 | 0.06 | ||
T13~ 20.5 | 0.12 | |||
T21~ 50 | 0.1 | |||
Perpendicularity of Datum Plane | 0.015 per 100mm | |||
Circumference Chamfering | Standard | C0.3 or Less | ||
Large | C0.1 Fine Chamfering |