We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
PDFQP-[25-500/0.5]-[10-300/0.5]-[5-49/0.5]
Description
EN AW-2017 Equiv./Duralumin Plates/3 Configurable Dimensions
Stock availability:
On request
If you are seeking MISUMI PDFQP-[25-500/0.5]-[10-300/0.5]-[5-49/0.5], communicate with FAMAGA, the world's main company of industrial equipment. Our company has advanced for more than ten years - these are years of experience, which are expressed in the quality of outcomes and special attention to each orderer. We appreciate everyone, who engaged with us - so, our regular buyers pick up the most favorable purchase forms and discounts on the factory-made equipment market. Now, there are more than 3500 such buyers, and we constantly compose new agreements. More than 650 agreements are achieved per day, because FAMAGA works all over the world Germany, United Kingdom, Sri Lanka, Liberia, Zimbabwe, Angola, Monaco, Hungary, Burundi, United Arab Emirates, Myanmar, East Timor, Swaziland, Bahamas, Papua New Guinea, Mauritius, Malta, Oman, El Salvador, Latvia, Haiti, New Zealand, Togo, United States, Romania, Jamaica, Samoa, Armenia, Benin, Fiji, Peru, Panama, Bosnia and Herzegovina, China, Slovakia, Mexico, Denmark, Kuwait, Madagascar, Iceland, Poland, Guatemala. A well-shaped logistics bond and a partnership network cheer us to dispatch our goods anywhere in the earth immediately without disreputing product quality.
A particular source of honor for FAMAGA is its workers, each of whom contributes to our work. We request into our team only specialists, who already have experience in the field of manufacturing equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this number is growing every day. We are happy that consumers choose FAMAGA again and again, and we are happy to make more progressive and technologically developed industrial equipment so as stay in control.
To get some advice or place an order, get in touch with us or write a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Part Number | - | A | - | B | - | T | ||||||||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | |||||||||||||
PD | F | Q | M | - | 255 | - | 220 | - | 15 |
Part Number | 0.5mm Increment | T Selectable/Configurable | |||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | ||
A≥B | |||||||
Standard | PD | L (Rolled) | N | P Q N M | 25~ 500 | 10~ 300 | 5, 6, 8, 10, 12, 15, 20, 25, 30, 40, 50 |
Large | L-PD | 250~ 2500 | 20~ 1250 | 3, 4, 5, 6, 8, 10, 12, 15, 20, 25, 30, 35, 40, 45, 50 | |||
Standard | PD | F (Milled) | P Q N M | P Q N M | 25~ 500 | 10~ 300 | 5~49 (0.5mm Increment) |
Large | L-PD | 250~ 2400 | 20~ 800 | 5~50 (0.5mm Increment) | |||
Standard | PD | S (Surface Grinding) | 25~ 500 | 10~ 300 | 5~49 (0.5mm Increment) |
Upper-Lower Surface Finish | Available for N only | ||||||||||
T Dimension | |||||||||||
3 | 4, 5 | 6 | 8 | 10 | 12, 15 | 20 | 25 | 30, 35 | 40 | 45, 50 | |
L(Rolled) | 0.2 | 0.35 | 0.45 | 0.5 | 0.6 | 0.7 | 0.8 | 0.9 | 1.0 | 1.1 | 1.3 |
Upper-Lower Surface Finish | A, B Length | P | Q | N | M |
L (Rolled) F (Milled) S (Surface Grinding) | 250mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
250.5mm or More | +0.1~+0.6 | 0~+0.5 | 0.25 | -0.5~0 |
Upper-Lower Surface Finish | A, B Length | P | Q | N | M |
F (Milled) | 550mm or Less | +0.1~+0.3 | 0~0.2 | 0.1 | -0.2~0 |
550.5mm or More | +0.1~+0.4 | 0~0.3 | 0.15 | -0.3~0 | |
S (Surface Grinding) | +0.1~+0.2 | 0~0.1 | 0.05 | -0.1~0 |
Item | Upper-Lower Surface Finish | |||
L (Rolled) | F (Milled) | S (Surface Grinding) | ||
Thickness Parallelism (per 100mm) | T3~ 6.5 | - | 0.05 | 0.025 |
T7~ 12.5 | 0.03 | |||
T13~ 15.5 | 0.05 | |||
T16~ 20.5 | 0.07 | 0.07 | ||
T21~ 50 | 0.1 | 0.1 | ||
Flatness (per 100mm) | T3~ 8.5 | 0.2 | 0.15 | 0.12 |
T9~ 12.5 | 0.13 | 0.06 | ||
T13~ 20.5 | 0.12 | |||
T21~ 50 | 0.1 | |||
Perpendicularity of Datum Plane | 0.015 per 100mm | |||
Circumference Chamfering | Standard | C0.3 or Less | ||
Large | C0.1 Fine Chamfering |