We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
PDFPM-[25-500/0.5]-[10-300/0.5]-[5-49/0.5]
Description
EN AW-2017 Equiv./Duralumin Plates/3 Configurable Dimensions
Stock availability:
On request
If you are looking for MISUMI PDFPM-[25-500/0.5]-[10-300/0.5]-[5-49/0.5], reach FAMAGA, the world's chief provider of factory-made equipment. Our company has existed for more than ten years - these are years of experience, which are depicted in the quality of items and individual attention to each buyer. We understand everyone, who collaborated with us - so, our regular clients get the most convenient purchase forms and discounts on the factory-made equipment market. Now, there are more than 3500 such clients, and we constantly make new agreements. More than 650 agreements are achieved per day, because FAMAGA works all over the world Germany, United Kingdom, Cuba, Turkmenistan, Bahrain, Jamaica, Nicaragua, Kyrgyzstan, Tunisia, Bolivia, Lebanon, Haiti, Morocco, Colombia, Zimbabwe, Andorra, Eritrea, Georgia, Brunei, Honduras, Uganda, Cape Verde, Egypt, Japan, Malaysia, Benin, Mongolia, Guatemala, El Salvador, Samoa, Switzerland, Russia, Luxembourg, Israel, Madagascar, Norway, Suriname, Yemen, Zambia, Comoros, Belarus. A well-elaborated logistics series and a partnership network cheer us to deliver our goods anywhere in the earth immediately without compromising product quality.
A particular source of good name for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the field of manufacturing equipment.
All merchandises from FAMAGA are assured - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this quantity is ascending every day. We are proud that consumers choose FAMAGA again and again, and we strive to make more progressive and technologically developed industrial equipment so as stay in control.
To consult or place an order, get in touch with us or write a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Part Number | - | A | - | B | - | T | ||||||||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | |||||||||||||
PD | F | Q | M | - | 255 | - | 220 | - | 15 |
Part Number | 0.5mm Increment | T Selectable/Configurable | |||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | ||
A≥B | |||||||
Standard | PD | L (Rolled) | N | P Q N M | 25~ 500 | 10~ 300 | 5, 6, 8, 10, 12, 15, 20, 25, 30, 40, 50 |
Large | L-PD | 250~ 2500 | 20~ 1250 | 3, 4, 5, 6, 8, 10, 12, 15, 20, 25, 30, 35, 40, 45, 50 | |||
Standard | PD | F (Milled) | P Q N M | P Q N M | 25~ 500 | 10~ 300 | 5~49 (0.5mm Increment) |
Large | L-PD | 250~ 2400 | 20~ 800 | 5~50 (0.5mm Increment) | |||
Standard | PD | S (Surface Grinding) | 25~ 500 | 10~ 300 | 5~49 (0.5mm Increment) |
Upper-Lower Surface Finish | Available for N only | ||||||||||
T Dimension | |||||||||||
3 | 4, 5 | 6 | 8 | 10 | 12, 15 | 20 | 25 | 30, 35 | 40 | 45, 50 | |
L(Rolled) | 0.2 | 0.35 | 0.45 | 0.5 | 0.6 | 0.7 | 0.8 | 0.9 | 1.0 | 1.1 | 1.3 |
Upper-Lower Surface Finish | A, B Length | P | Q | N | M |
L (Rolled) F (Milled) S (Surface Grinding) | 250mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
250.5mm or More | +0.1~+0.6 | 0~+0.5 | 0.25 | -0.5~0 |
Upper-Lower Surface Finish | A, B Length | P | Q | N | M |
F (Milled) | 550mm or Less | +0.1~+0.3 | 0~0.2 | 0.1 | -0.2~0 |
550.5mm or More | +0.1~+0.4 | 0~0.3 | 0.15 | -0.3~0 | |
S (Surface Grinding) | +0.1~+0.2 | 0~0.1 | 0.05 | -0.1~0 |
Item | Upper-Lower Surface Finish | |||
L (Rolled) | F (Milled) | S (Surface Grinding) | ||
Thickness Parallelism (per 100mm) | T3~ 6.5 | - | 0.05 | 0.025 |
T7~ 12.5 | 0.03 | |||
T13~ 15.5 | 0.05 | |||
T16~ 20.5 | 0.07 | 0.07 | ||
T21~ 50 | 0.1 | 0.1 | ||
Flatness (per 100mm) | T3~ 8.5 | 0.2 | 0.15 | 0.12 |
T9~ 12.5 | 0.13 | 0.06 | ||
T13~ 20.5 | 0.12 | |||
T21~ 50 | 0.1 | |||
Perpendicularity of Datum Plane | 0.015 per 100mm | |||
Circumference Chamfering | Standard | C0.3 or Less | ||
Large | C0.1 Fine Chamfering |