We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
PDFNP-[25-500/0.5]-[10-300/0.5]-[5-49/0.5]
Description
EN AW-2017 Equiv./Duralumin Plates/3 Configurable Dimensions
Stock availability:
On request
If you are pursuing MISUMI PDFNP-[25-500/0.5]-[10-300/0.5]-[5-49/0.5], communicate with FAMAGA, the world's top distributor of industrialized equipment. Our company has functioned for more than ten years - these are cycles of experience, which are expressed in the quality of outcomes and personalseparate attention to each user. We appreciate everyone, who conspired with us - so, our regular customers accept the most favorable purchase terms and discounts on the factory-made equipment market. At present, there are more than 3500 such customers, and we constantly arrange new agreements. More than 650 contracts are concluded per day, because FAMAGA works all over the world Germany, United Kingdom, Bahamas, Liechtenstein, San Marino, Philippines, Fiji, Czech Republic, Cameroon, Togo, Burma, Zimbabwe, Suriname, Honduras, Tajikistan, Denmark, Netherlands, Jamaica, Yemen, Canada, Bangladesh, Estonia, Mauritania, Monaco, Qatar, United States, Laos, Egypt, Angola, Pakistan, Bolivia, El Salvador, Serbia, Rwanda, Indonesia, Kenya, Sweden, Swaziland, Lithuania, Mexico, Burkina Faso. A well-built logistics system and a partnership network help us to send our units anywhere in the earth with no delay without discrediting product quality.
A specific source of pride for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the field of manufacturing equipment.
All items from FAMAGA are verified - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that clients choose FAMAGA again and again, and we are eager to make more progressive and technologically developed industrial equipment so as stay in control.
To ask a question or place an order, get in touch with us or send a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Part Number | - | A | - | B | - | T | ||||||||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | |||||||||||||
PD | F | Q | M | - | 255 | - | 220 | - | 15 |
Part Number | 0.5mm Increment | T Selectable/Configurable | |||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | ||
A≥B | |||||||
Standard | PD | L (Rolled) | N | P Q N M | 25~ 500 | 10~ 300 | 5, 6, 8, 10, 12, 15, 20, 25, 30, 40, 50 |
Large | L-PD | 250~ 2500 | 20~ 1250 | 3, 4, 5, 6, 8, 10, 12, 15, 20, 25, 30, 35, 40, 45, 50 | |||
Standard | PD | F (Milled) | P Q N M | P Q N M | 25~ 500 | 10~ 300 | 5~49 (0.5mm Increment) |
Large | L-PD | 250~ 2400 | 20~ 800 | 5~50 (0.5mm Increment) | |||
Standard | PD | S (Surface Grinding) | 25~ 500 | 10~ 300 | 5~49 (0.5mm Increment) |
Upper-Lower Surface Finish | Available for N only | ||||||||||
T Dimension | |||||||||||
3 | 4, 5 | 6 | 8 | 10 | 12, 15 | 20 | 25 | 30, 35 | 40 | 45, 50 | |
L(Rolled) | 0.2 | 0.35 | 0.45 | 0.5 | 0.6 | 0.7 | 0.8 | 0.9 | 1.0 | 1.1 | 1.3 |
Upper-Lower Surface Finish | A, B Length | P | Q | N | M |
L (Rolled) F (Milled) S (Surface Grinding) | 250mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
250.5mm or More | +0.1~+0.6 | 0~+0.5 | 0.25 | -0.5~0 |
Upper-Lower Surface Finish | A, B Length | P | Q | N | M |
F (Milled) | 550mm or Less | +0.1~+0.3 | 0~0.2 | 0.1 | -0.2~0 |
550.5mm or More | +0.1~+0.4 | 0~0.3 | 0.15 | -0.3~0 | |
S (Surface Grinding) | +0.1~+0.2 | 0~0.1 | 0.05 | -0.1~0 |
Item | Upper-Lower Surface Finish | |||
L (Rolled) | F (Milled) | S (Surface Grinding) | ||
Thickness Parallelism (per 100mm) | T3~ 6.5 | - | 0.05 | 0.025 |
T7~ 12.5 | 0.03 | |||
T13~ 15.5 | 0.05 | |||
T16~ 20.5 | 0.07 | 0.07 | ||
T21~ 50 | 0.1 | 0.1 | ||
Flatness (per 100mm) | T3~ 8.5 | 0.2 | 0.15 | 0.12 |
T9~ 12.5 | 0.13 | 0.06 | ||
T13~ 20.5 | 0.12 | |||
T21~ 50 | 0.1 | |||
Perpendicularity of Datum Plane | 0.015 per 100mm | |||
Circumference Chamfering | Standard | C0.3 or Less | ||
Large | C0.1 Fine Chamfering |