We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
PCFPM-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
Description
EN 1.1206 Equiv. Plates/3 Configurable Dimensions
Stock availability:
On request
If you are pursuing MISUMI PCFPM-[20-500/0.5]-[20-300/0.5]-[4-50/0.5], call FAMAGA, the world's central vendor of streamlined equipment. Our company has lasted for more than ten years - these are ages of experience, which are illustrated in the quality of outputs and special attention to each consumer. We respect everyone, who engaged with us - hence, our regular buyers obtain the most attractive purchase conditions and discounts on the manufacturing equipment market. At this moment, there are more than 3500 such purchasers, and we constantly form new agreements. More than 600 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Uzbekistan, Côte d\'Ivoire, Jamaica, Austria, Kiribati, Bhutan, Portugal, Malawi, Algeria, Botswana, Slovakia, Monaco, Grenada, Belize, Switzerland, Sudan, Morocco, Montenegro, Japan, Egypt, Senegal, Malaysia, East Timor, Finland, Gambia, Paraguay, Australia, Ecuador, Iceland, Brunei, North Korea, Burkina Faso, Liechtenstein, Peru, Ghana, Malta, Iraq, Czech Republic, Cameroon, India, Kenya, New Zealand, Andorra, Tunisia. A well-built logistics system and a partnership network cheer us to deliver our elements anywhere in the earth immediately without disreputing product quality.
A specific source of repute for FAMAGA is its employees, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the field of machine made streamlined equipment.
All products from FAMAGA are assured - we are responsible for the cause of our work. Now, more than 10 million units of products have been delivered, and this bulk is increasing every day. We are pleased that buyers choose FAMAGA again and again, and we are glad to make more advanced and technologically modern industrial equipment so as stay in control.
To inquire or make a request, get in touch with us or write to the online chat on our official website. You can also direct a list of the desirable equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Part Number | - | A | - | B | - | T | ||||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | |||||||||
PC | F | Q | M | - | 255 | - | 220 | - | 18 |
6-Surface Finish | |||||||
Part Number | 0.5mm Increment | ||||||
Upper-Lower Finish Method | Type | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | T | |
AB | |||||||
Milled | Standard | PCF | P Q N M | P Q N M | 20~500 | 20~300 | 4~50 |
Large | L-PCF | 300.5~2000 | 100~800 | 10~50 | |||
Rotary Grinding | Standard | PCR | 20~500 | 20~300 | 4~50 | ||
Large | L-PCR | 300.5~1400 | 100~1000 | 10~50 | |||
Surface Grinding | Standard | PCS | 20~500 | 20~300 | 4~50 | ||
Large | L-PCS | 300.5~800 | 100~500 | 10~50 |
Upper-Lower Finish Method | P | Q | N | M |
Milled | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
Rotary Grinding | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
Surface Grinding | +0.1~+0.2 | 0~+0.1 | 0.05 | -0.1~0 |
A, B Dimension | P | Q | N | M |
250mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
250.5mm or More | +0.1~+0.6 | 0~+0.5 | 0.25 | -0.5~0 |
Item | Upper-Lower Finish Method | |||
Milled | Rotary Grinding | Surface Grinding | ||
Thickness Parallelism (per 100mm) | 0.05 | 0.012 | 0.012 | |
Flatness (per 100mm) | T4~7.5 | 0.1 | 0.05 | 0.05 |
T8~15.5 | 0.07 | 0.03 | 0.03 | |
T16~25.5 | 0.05 | 0.015 | 0.015 | |
T26~50 | 0.05 | 0.012 | 0.012 | |
Perpendicularity of Datum Plane | 0.015 per 100mm | |||
Circumference Chamfering | 6-Surface Finish | C0.2~C0.5 |
Item | Milled | Rotary Grinding | Surface Grinding | ||||||
A, B Dimension | ~500 | ~1000 | 1000.5~ | ~500 | ~1000 | 1000.5~ | ~500 | 500.5~ | |
Flatness (per O.A.L.) | T10~19.5 | 0.3 | 0.4 | 0.5 | 0.3 | 0.4 | 0.5 | 0.1 | 0.2 |
T20~29.5 | 0.2 | 0.3 | 0.5 | 0.2 | 0.3 | 0.5 | 0.05 | 0.1 | |
T30~50 | 0.2 | 0.3 | 0.3 | 0.2 | 0.3 | 0.3 | 0.05 | 0.1 | |
Thickness Parallelism(per 100mm) | 0.05 | 0.012 | 0.012 | ||||||
Perpendicularity of Datum Plane | 0.015 per 100mm | ||||||||
Circumference Chamfering | 6-Surface Finish | C0.2~C0.5 |