We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
PARPN-[15-500/0.5]-[10-200/0.5]-[5-50/0.5]
Description
EN 1.4301 Equiv. Plates/3 Configurable Dimensions
Stock availability:
On request
If you are pursuing MISUMI PARPN-[15-500/0.5]-[10-200/0.5]-[5-50/0.5], reach FAMAGA, the world's central vendor of streamlined equipment. Our company has lasted for more than ten years - these are years of experience, which are depicted in the quality of outcomes and special attention to each consumer. We esteem everyone, who engaged with us - so, our regular buyers obtain the most acceptable purchase forms and discounts on the factory-made equipment market. At this time, there are more than 4000 such purchasers, and we constantly form new agreements. More than 700 contracts are concluded per day, because FAMAGA operates all over the planet Germany, United Kingdom, Vietnam, Mongolia, Haiti, Belarus, Philippines, Malaysia, Bahamas, The Bahamas, Montenegro, Nepal, Eswatini, Croatia, China, Brazil, Netherlands, Oman, Canada, Denmark, Iran, Eritrea, Lithuania, Jamaica, Angola, Austria, United Arab Emirates, Monaco, Costa Rica, Russia, Djibouti, Mozambique, Nicaragua, Finland, Uruguay, Libya, Tajikistan, Norway, Albania, Bolivia, East Timor, Peru, Burkina Faso, Guatemala, Andorra, Pakistan, Serbia. A well-built logistics system and a partnership network help us to deliver our goods anywhere in the planet with no delay without disreputing product quality.
A special source of repute for FAMAGA is its employees, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this quantity is rising every day. We are proud that consumers choose FAMAGA again and again, and we are pleased to make more developed and technologically modern industrial equipment so as not to lower the bar.
To inquire or make a request, phone us or send a message to the online chat on our official website. You can also send a list of the needful equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Part Number | - | A | - | B | - | T | ||||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | |||||||||
PA | F | Q | M | - | 255 | - | 136 | - | 18 |
Part Number | 0.5mm Increment | |||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | T |
AB | ||||||
PA (Standard Size) | F (Milled) R (Rotary Grinding) | P Q N M | P Q N M | 15~500 | 10~200 | 5~ 50 |
H-PA (Narrow) | F (Milled) | 150~800 | 10~19.5 | 5~ 19.5 | ||
L-PA (Large) | 200.5~1200 | 20~1000 | 5~ 50 |
Upper-Lower Surface Finish | A, B Dimension | P | Q | N | M |
F (Milled), R (Rotary Grinding) | 550mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
550.5mm or More | +0.1~+0.4 | 0~+0.3 | 0.15 | -0.3~0 |
Upper-Lower Surface Finish | A, B Dimension | P | Q | N | M |
F (Milled), R (Rotary Grinding) | 250mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
250.5mm or More | +0.1~+0.6 | 0~+0.5 | 0.25 | -0.5~0 |
Item | Upper-Lower Surface Finish | ||
F (Milled) | R (Rotary Grinding) | ||
Thickness Parallelism (per 100mm) | 0.05 | 0.012 | |
Flatness (per 100mm) | T5~7.5 | 0.1 | 0.05 |
T8~15.5 | 0.07 | 0.03 | |
T16~25.5 | 0.05 | 0.015 | |
T26~50 | 0.05 | 0.012 | |
Perpendicularity of Datum Plane | 0.015 per 100mm | ||
Circumference Chamfering | Standard | C0.2~C0.5 | |
Narrow / Large | C0.1 Fine Chamfering |