We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
PAFNN-[15-500/0.5]-[10-200/0.5]-[5-50/0.5]
Description
EN 1.4301 Equiv. Plates/3 Configurable Dimensions
Stock availability:
On request
If you are pursuing MISUMI PAFNN-[15-500/0.5]-[10-200/0.5]-[5-50/0.5], reach FAMAGA, the world's dominant retailer of mechanized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are depicted in the quality of outcomes and special attention to each user. We esteem everyone, who collaborated with us - so, our regular buyers accept the most acceptable purchase terms and discounts on the factory-made equipment market. Today, there are more than 4000 such purchasers, and we constantly form new agreements. More than 700 purchases are terminated per day, because FAMAGA operates all over the planet Germany, United Kingdom, Peru, Niger, Portugal, Papua New Guinea, Madagascar, Togo, China, Jamaica, Uganda, Zimbabwe, Iceland, Djibouti, Botswana, Paraguay, Angola, Fiji, Nigeria, Netherlands, Iraq, El Salvador, Hungary, Bolivia, United Arab Emirates, New Zealand, Serbia, Georgia, Ecuador, Cyprus, Pakistan, Swaziland, Belarus, Nicaragua, Iran, Croatia, Laos, Mauritania, Finland, Tunisia, Egypt, Indonesia, Mexico, Armenia, South Korea, Guatemala. A well-built logistics bond and a partnership network assist us to deliver our products anywhere in the planet quickly without disreputing product quality.
A particular source of repute for FAMAGA is its employees, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the sphere of manufacturing equipment.
All items from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this quantity is increasing every day. We are glad that consumers choose FAMAGA again and again, and we are glad to make more developed and technologically modern industrial equipment so as not to lower the bar.
To inquire or make a request, phone us or write to the online chat on our official website. You can also send a list of the needful equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Part Number | - | A | - | B | - | T | ||||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | |||||||||
PA | F | Q | M | - | 255 | - | 136 | - | 18 |
Part Number | 0.5mm Increment | |||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | T |
AB | ||||||
PA (Standard Size) | F (Milled) R (Rotary Grinding) | P Q N M | P Q N M | 15~500 | 10~200 | 5~ 50 |
H-PA (Narrow) | F (Milled) | 150~800 | 10~19.5 | 5~ 19.5 | ||
L-PA (Large) | 200.5~1200 | 20~1000 | 5~ 50 |
Upper-Lower Surface Finish | A, B Dimension | P | Q | N | M |
F (Milled), R (Rotary Grinding) | 550mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
550.5mm or More | +0.1~+0.4 | 0~+0.3 | 0.15 | -0.3~0 |
Upper-Lower Surface Finish | A, B Dimension | P | Q | N | M |
F (Milled), R (Rotary Grinding) | 250mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
250.5mm or More | +0.1~+0.6 | 0~+0.5 | 0.25 | -0.5~0 |
Item | Upper-Lower Surface Finish | ||
F (Milled) | R (Rotary Grinding) | ||
Thickness Parallelism (per 100mm) | 0.05 | 0.012 | |
Flatness (per 100mm) | T5~7.5 | 0.1 | 0.05 |
T8~15.5 | 0.07 | 0.03 | |
T16~25.5 | 0.05 | 0.015 | |
T26~50 | 0.05 | 0.012 | |
Perpendicularity of Datum Plane | 0.015 per 100mm | ||
Circumference Chamfering | Standard | C0.2~C0.5 | |
Narrow / Large | C0.1 Fine Chamfering |