We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
PAFMQ-[15-500/0.5]-[10-200/0.5]-[5-50/0.5]
Description
EN 1.4301 Equiv. Plates/3 Configurable Dimensions
Stock availability:
On request
If you are seeking MISUMI PAFMQ-[15-500/0.5]-[10-200/0.5]-[5-50/0.5], communicate with FAMAGA, the world's chief provider of factory-made equipment. Our company has existed for more than ten years - these are ages of experience, which are expressed in the quality of items and private attention to each client. We value everyone, who conspired with us - so, our regular consumers receive the most helpful purchase conditions and discounts on the factory-made equipment market. At this moment, there are more than 4000 such clients, and we constantly sign new agreements. More than 700 agreements are achieved per day, because FAMAGA operates all over the planet Germany, United Kingdom, Albania, Slovakia, Congo, Slovenia, Indonesia, Djibouti, Cape Verde, Philippines, Bangladesh, Tajikistan, Mongolia, China, Benin, Austria, The Gambia, South Sudan, Iceland, Japan, Sierra Leone, Angola, Israel, Togo, Vietnam, Uruguay, Peru, Jamaica, Belize, Panama, Botswana, Kuwait, Burkina Faso, Fiji, Australia, Malaysia, Zambia, Belarus, Samoa, Cameroon, Mauritania, Brunei, Afghanistan, Nigeria, Poland, Egypt. A well-shaped logistics link and a partnership network cheer us to send our elements anywhere in the planet immediately without damaging product quality.
A specific source of good name for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All outputs from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been delivered, and this number is increasing every day. We are glad that customers choose FAMAGA again and again, and we are pleased to make more developed and technologically modern industrial equipment so as not to lower the bar.
To consult or make a request, phone us or write a message to the online chat on our official website. You can also send a list of the needful equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Part Number | - | A | - | B | - | T | ||||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | |||||||||
PA | F | Q | M | - | 255 | - | 136 | - | 18 |
Part Number | 0.5mm Increment | |||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | T |
AB | ||||||
PA (Standard Size) | F (Milled) R (Rotary Grinding) | P Q N M | P Q N M | 15~500 | 10~200 | 5~ 50 |
H-PA (Narrow) | F (Milled) | 150~800 | 10~19.5 | 5~ 19.5 | ||
L-PA (Large) | 200.5~1200 | 20~1000 | 5~ 50 |
Upper-Lower Surface Finish | A, B Dimension | P | Q | N | M |
F (Milled), R (Rotary Grinding) | 550mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
550.5mm or More | +0.1~+0.4 | 0~+0.3 | 0.15 | -0.3~0 |
Upper-Lower Surface Finish | A, B Dimension | P | Q | N | M |
F (Milled), R (Rotary Grinding) | 250mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
250.5mm or More | +0.1~+0.6 | 0~+0.5 | 0.25 | -0.5~0 |
Item | Upper-Lower Surface Finish | ||
F (Milled) | R (Rotary Grinding) | ||
Thickness Parallelism (per 100mm) | 0.05 | 0.012 | |
Flatness (per 100mm) | T5~7.5 | 0.1 | 0.05 |
T8~15.5 | 0.07 | 0.03 | |
T16~25.5 | 0.05 | 0.015 | |
T26~50 | 0.05 | 0.012 | |
Perpendicularity of Datum Plane | 0.015 per 100mm | ||
Circumference Chamfering | Standard | C0.2~C0.5 | |
Narrow / Large | C0.1 Fine Chamfering |