We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
L-PSSNM-[250-800/0.5]-[20-500/0.5]-[5-50/0.5]
Description
EN 1.0038 Equiv. Plates/3 Configurable Dimensions
Stock availability:
On request
If you are seeking MISUMI L-PSSNM-[250-800/0.5]-[20-500/0.5]-[5-50/0.5], communicate with FAMAGA, the world's principle producer of machine made equipment. Our company has worked for more than ten years - these are ages of experience, which are expressed in the quality of items and private attention to each buyer. We value everyone, who liased with us - so, our regular consumers get the most helpful purchase conditions and discounts on the factory-made equipment market. At this moment, there are more than 4000 such clients, and we constantly sign new agreements. More than 600 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Spain, Madagascar, Bahamas, Uzbekistan, Congo, Guatemala, Mozambique, Namibia, Pakistan, Monaco, Malawi, Grenada, Romania, Oman, Mauritius, Russia, Burkina Faso, Djibouti, Ukraine, United States, Norway, Malaysia, United Arab Emirates, Albania, Austria, Fiji, Lithuania, Dominica, India, Yemen, Andorra, Egypt, Nepal, Tajikistan, El Salvador, East Timor, Poland, Philippines, Luxembourg, Cape Verde, Costa Rica, China, Bolivia. A well-shaped logistics network and a partnership network cheer us to send our elements anywhere in the planet immediately without damaging product quality.
A specific source of good name for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the sphere of factory-made equipment.
All merchandises from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been provided, and this quantity is growing every day. We are glad that users choose FAMAGA again and again, and we strive to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To consult or order, call us by phone or write to the online chat on our site. You can also forward a list of the necessary equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Part Number | - | A | - | B | - | T | ||||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | |||||||||
PS | F | Q | M | - | 255 | - | 220 | - | 18 |
6-Surface Finish | |||||||
Part Number | 0.5mm Increment | ||||||
Upper-Lower Finish Method | Type | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | T | |
AB | |||||||
Milled | Standard | PSF | P Q N M | P Q N M | 20~500 | 20~300 | 4~50 |
Large | L-PSF | 250~2500 | 10~1500 | 5~50 | |||
Rotary Grinding | Standard | PSR | 20~500 | 20~300 | 4~50 | ||
Large | L-PSR | 250~1600 | 10~1200 | 10~50 | |||
Surface Grinding | Standard | PSS | 20~500 | 20~300 | 4~50 | ||
Large | L-PSS | 250~800 | 20~500 | 5~50 |
Upper-Lower Surface Finished (Sides Not Finished) Tolerance should be noted. | ||||||||||
Part Number | 1mm Increment | 0.5mm Increment | ||||||||
Upper-Lower Finish Method | Type | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | T | ||||
AB | ||||||||||
Milled | Standard | SS2F | P Q N M | A | +5 0 | B | +5 0 | 20~500 | 10~300 | 5~50 |
Large | L-SS2F | 251~2500 | 10~1500 |
Upper-Lower Finish Method | P | Q | N | M |
Milled | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
Rotary Grinding | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
Surface Grinding | +0.1~+0.2 | 0~+0.1 | 0.05 | -0.1~0 |
A, B Dimension | P | Q | N | M |
250mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
250.5mm or More | +0.1~+0.6 | 0~+0.5 | 0.25 | -0.5~0 |
Item | Upper-Lower Finish Method | |||
Milled | Rotary Grinding | Surface Grinding | ||
Thickness Parallelism (per 100mm) | 0.05 | 0.012 | 0.012 | |
Flatness (per 100mm) | T4~7.5 | 0.1 | 0.05 | 0.05 |
T8~15.5 | 0.07 | 0.03 | 0.03 | |
T16~25.5 | 0.05 | 0.015 | 0.015 | |
T26~50 | 0.05 | 0.012 | 0.012 | |
Perpendicularity of Datum Plane (Applicable to 6-Surface Finished Products) | 0.015 per 100mm | |||
Circumference Chamfering | Upper-Lower Surface Finished | Deburring Only | ||
6-Surface Finish | C0.2~C0.5 |
Item | Milled | Rotary Grinding | Surface Grinding | ||||||
A, B Dimension | ~500 | ~1000 | 1000.5~ | ~500 | ~1000 | 1000.5~ | ~500 | 500.5~ | |
Flatness (per O.A.L.) | T5~9.5 | 0.3 | 0.5 | 0.7 | 0.3 | 0.5 | 0.7 | 0.1 | 0.2 |
T10~19.5 | 0.3 | 0.4 | 0.5 | 0.3 | 0.4 | 0.5 | 0.1 | 0.2 | |
T20~29.5 | 0.2 | 0.3 | 0.5 | 0.2 | 0.3 | 0.5 | 0.05 | 0.1 | |
T30~50 | 0.2 | 0.3 | 0.3 | 0.2 | 0.3 | 0.3 | 0.05 | 0.1 | |
Thickness Parallelism (per 100mm) | 0.05 | 0.012 | 0.012 | ||||||
Perpendicularity of Datum Plane (Applicable to 6-Surface Finished Products) | 0.015 per 100mm | ||||||||
Circumference Chamfering | Upper-Lower Surface Finished | Deburring Only | |||||||
6-Surface Finish | C0.2~C0.5 |