We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
L-PSFQP-[250-2500/0.5]-[10-1500/0.5]-[5-50/0.5]
Description
EN 1.0038 Equiv. Plates/3 Configurable Dimensions
Stock availability:
On request
If you are inspecting MISUMI L-PSFQP-[250-2500/0.5]-[10-1500/0.5]-[5-50/0.5], reach FAMAGA, the world's primary supplier of manufacturing equipment. Our company has operated for more than ten years - these are cycles of experience, which are depicted in the quality of outcomes and particular attention to each orderer. We esteem everyone, who joined with us - so, our regular purchasers pick up the most acceptable purchase terms and discounts on the factory-made equipment market. Today, there are more than 4000 such customers, and we constantly make new agreements. More than 600 agreements are achieved per day, because FAMAGA works all over the world Germany, United Kingdom, Burma, Syria, Japan, Malta, Saudi Arabia, Lebanon, Myanmar, Eritrea, Afghanistan, Kuwait, Czech Republic, Poland, Burundi, Belize, El Salvador, Gambia, Panama, Brunei, Botswana, Greece, Azerbaijan, Comoros, Zambia, Cape Verde, Peru, Belarus, Uruguay, Israel, South Sudan, Argentina, Costa Rica, Nigeria, Latvia, Tajikistan, Qatar, United Arab Emirates, Jamaica, Swaziland, Djibouti, Guatemala, United States, Andorra, Benin, Samoa. A advanced logistics connection and a partnership network help us to ship our units anywhere in the earth with no delay without damaging product quality.
A specific source of dignity for FAMAGA is its employees, each of whom contributes to our work. We call into our team only professionals, who already have experience in the sphere of industrial equipment.
All products from FAMAGA are guaranteed - we are responsible for the result of our work. Now, more than 10 million units of products have been delivered, and this number is amounting every day. We are proud that clients choose FAMAGA again and again, and we are eager to make more advanced and technologically advanced industrial equipment so as keep on top of it.
To ask a question or place an order, call us by phone or write to the online chat on our official website. You can also dispatch a list of the needful equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Part Number | - | A | - | B | - | T | ||||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | |||||||||
PS | F | Q | M | - | 255 | - | 220 | - | 18 |
6-Surface Finish | |||||||
Part Number | 0.5mm Increment | ||||||
Upper-Lower Finish Method | Type | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | T | |
AB | |||||||
Milled | Standard | PSF | P Q N M | P Q N M | 20~500 | 20~300 | 4~50 |
Large | L-PSF | 250~2500 | 10~1500 | 5~50 | |||
Rotary Grinding | Standard | PSR | 20~500 | 20~300 | 4~50 | ||
Large | L-PSR | 250~1600 | 10~1200 | 10~50 | |||
Surface Grinding | Standard | PSS | 20~500 | 20~300 | 4~50 | ||
Large | L-PSS | 250~800 | 20~500 | 5~50 |
Upper-Lower Surface Finished (Sides Not Finished) Tolerance should be noted. | ||||||||||
Part Number | 1mm Increment | 0.5mm Increment | ||||||||
Upper-Lower Finish Method | Type | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | T | ||||
AB | ||||||||||
Milled | Standard | SS2F | P Q N M | A | +5 0 | B | +5 0 | 20~500 | 10~300 | 5~50 |
Large | L-SS2F | 251~2500 | 10~1500 |
Upper-Lower Finish Method | P | Q | N | M |
Milled | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
Rotary Grinding | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
Surface Grinding | +0.1~+0.2 | 0~+0.1 | 0.05 | -0.1~0 |
A, B Dimension | P | Q | N | M |
250mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
250.5mm or More | +0.1~+0.6 | 0~+0.5 | 0.25 | -0.5~0 |
Item | Upper-Lower Finish Method | |||
Milled | Rotary Grinding | Surface Grinding | ||
Thickness Parallelism (per 100mm) | 0.05 | 0.012 | 0.012 | |
Flatness (per 100mm) | T4~7.5 | 0.1 | 0.05 | 0.05 |
T8~15.5 | 0.07 | 0.03 | 0.03 | |
T16~25.5 | 0.05 | 0.015 | 0.015 | |
T26~50 | 0.05 | 0.012 | 0.012 | |
Perpendicularity of Datum Plane (Applicable to 6-Surface Finished Products) | 0.015 per 100mm | |||
Circumference Chamfering | Upper-Lower Surface Finished | Deburring Only | ||
6-Surface Finish | C0.2~C0.5 |
Item | Milled | Rotary Grinding | Surface Grinding | ||||||
A, B Dimension | ~500 | ~1000 | 1000.5~ | ~500 | ~1000 | 1000.5~ | ~500 | 500.5~ | |
Flatness (per O.A.L.) | T5~9.5 | 0.3 | 0.5 | 0.7 | 0.3 | 0.5 | 0.7 | 0.1 | 0.2 |
T10~19.5 | 0.3 | 0.4 | 0.5 | 0.3 | 0.4 | 0.5 | 0.1 | 0.2 | |
T20~29.5 | 0.2 | 0.3 | 0.5 | 0.2 | 0.3 | 0.5 | 0.05 | 0.1 | |
T30~50 | 0.2 | 0.3 | 0.3 | 0.2 | 0.3 | 0.3 | 0.05 | 0.1 | |
Thickness Parallelism (per 100mm) | 0.05 | 0.012 | 0.012 | ||||||
Perpendicularity of Datum Plane (Applicable to 6-Surface Finished Products) | 0.015 per 100mm | ||||||||
Circumference Chamfering | Upper-Lower Surface Finished | Deburring Only | |||||||
6-Surface Finish | C0.2~C0.5 |