We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
L-PNFPP-[250-3000/0.5]-[20-800/0.5]-[5-50/0.5]
Description
EN AW-5052 Equiv. Configurable Aluminum Plates
Stock availability:
On request
If you are looking for MISUMI L-PNFPP-[250-3000/0.5]-[20-800/0.5]-[5-50/0.5], reach FAMAGA, the world's chief provider of factory-made equipment. Our company has existed for more than ten years - these are cycles of experience, which are depicted in the quality of outcomes and personalseparate attention to each client. We esteem everyone, who conspired with us - so, our regular customers receive the most acceptable purchase terms and discounts on the factory-made equipment market. Today, there are more than 4000 such consumers, and we constantly compose new agreements. More than 650 purchases are terminated per day, because FAMAGA operates all over the globe Germany, United Kingdom, Cuba, Azerbaijan, Italy, India, Antigua and Barbuda, Liechtenstein, Gambia, Bhutan, The Gambia, Dominica, Tajikistan, Australia, Kuwait, Norway, Tanzania, Vietnam, Malta, Peru, Costa Rica, Seychelles, Kyrgyzstan, Denmark, Suriname, Israel, Ireland, Belarus, Brunei, Nicaragua, Turkey, Panama, Paraguay, Jamaica, Niger, Syria, Andorra, Luxembourg, Albania, Djibouti, Zimbabwe, Benin, Latvia, Mexico, Iceland, Comoros, Poland. A well-elaborated logistics link and a partnership network assist us to conduct our products anywhere in the planet quickly without discrediting product quality.
A particular source of dignity for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the sphere of factory-made equipment.
All outputs from FAMAGA are ensured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that consumers choose FAMAGA again and again, and we are happy to make more advanced and technologically advanced industrial equipment so as not to lower the bar.
To request or order, call us by phone or send a message to the online chat on our site. You can also forward a list of the necessary equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Part Number | - | A | - | B | - | T | ||||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | |||||||||
PN | F | Q | M | - | 255 | - | 220 | - | 18 |
Part Number | 0.5mm Increment | T Selectable/Configurable | |||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | ||
AB | |||||||
Standard | PN | L (Rolled) | N | P Q N M | 25~ 500 | 10~ 300 | 5, 6, 8, 10, 12, 15, 20, 25, 30 , 40 , 50 |
Narrow Size | H-PN | 6~ 1600 | 6~ 19.5 | 3, 4, 5, 6, 8, 10, 12, 15, 20, 25, 30, 35 | |||
Large | L-PN | 250~ 3000 | 20~ 1500 | 3, 4, 5, 6, 8, 10, 12, 15, 20, 25, 30, 35, 40, 45, 50 | |||
Standard | PN | F (Milled) | P Q N M | P Q N M | 25~ 500 | 10~ 300 | 5~49 (0.5mm Increment) |
Narrow Size | H-PN | 7~ 1600 | 8~ 19.5 | 3~29.5 (0.5mm Increment) | |||
Large | L-PN | 250~ 3000 | 20~ 800 | 5~50 (0.5mm Increment) | |||
Standard | PN | S (Surface Grinding) | 25~ 500 | 10~ 300 | 5, 6, 7~49 (0.5mm Increment) |
Upper-Lower Surface Finish | Available for N only | ||||||||||
T Dimension | |||||||||||
3 | 4, 5 | 6 | 8 | 10 | 12, 15 | 20 | 25 | 30, 35 | 40 | 45, 50 | |
N (Rolled) | 0.2 | 0.35 | 0.45 | 0.5 | 0.6 | 0.7 | 0.8 | 0.9 | 1.0 | 1.1 | 1.3 |
Upper-Lower Surface Finish | A, B Dimension | P | Q | N | M |
L (Rolled) F (Milled) S (Surface Grinding) | 250mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
250.5mm or More | +0.1~+0.6 | 0~+0.5 | 0.25 | -0.5~0 |
Upper-Lower Surface Finish | A, B Length | P | Q | N | M |
F (Milled) | 550mm or Less | +0.1~+0.3 | 0~0.2 | 0.1 | -0.2~0 |
550.5mm or More | +0.1~+0.4 | 0~0.3 | 0.15 | -0.3~0 | |
S (Surface Grinding) | +0.1~+0.2 | 0~0.1 | 0.05 | -0.1~0 |
Item | Upper-Lower Surface Finish | |||
L (Rolled) | F (Milled) | S (Surface Grinding) | ||
Thickness Parallelism (per 100mm) | T3~6.5 | - | 0.05 | 0.025 |
T7~12.5 | 0.03 | |||
T13~15.5 | 0.05 | |||
T16~20.5 | 0.07 | 0.07 | ||
T21~50 | 0.1 | 0.1 | ||
Flatness (per 100mm) | T3~8.5 | 0.15 | 0.15 | 0.12 |
T9~12.5 | 0.13 | 0.06 | ||
T13~20.5 | 0.12 | |||
T21~50 | 0.1 | |||
Perpendicularity of Datum Plane | 0.015 per 100mm | |||
Circumference Chamfering | Standard | C0.3 or Less | ||
Narrow / Large | C0.1 Fine Chamfering |