We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
L-PDFNM-[250-2400/0.5]-[20-800/0.5]-[5-50/0.5]
Description
EN AW-2017 Equiv./Duralumin Plates/3 Configurable Dimensions
Stock availability:
On request
If you are inspecting MISUMI L-PDFNM-[250-2400/0.5]-[20-800/0.5]-[5-50/0.5], communicate with FAMAGA, the world's primary supplier of manufacturing equipment. Our company has operated for more than ten years - these are years of experience, which are expressed in the quality of items and particular attention to each orderer. We value everyone, who joined with us - so, our regular purchasers pick up the most helpful purchase forms and discounts on the factory-made equipment market. At this time, there are more than 4000 such customers, and we constantly make new agreements. More than 650 contracts are concluded per day, because FAMAGA operates all over the globe Germany, United Kingdom, Angola, Slovenia, Singapore, Paraguay, Greece, Nigeria, Kiribati, Eswatini, Samoa, Turkmenistan, The Bahamas, Gambia, Israel, Hungary, Burkina Faso, Argentina, Indonesia, Tonga, Romania, Sierra Leone, Slovakia, Jamaica, Algeria, Sweden, Mauritius, El Salvador, Estonia, Mauritania, Fiji, Botswana, Uganda, Switzerland, Niger, Latvia, Brunei, Seychelles, Iceland, Morocco, Cameroon, Ghana, Georgia, Zimbabwe. A advanced logistics series and a partnership network help us to dispatch our goods anywhere in the planet with no delay without undermining product quality.
A special source of pride for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the field of manufacturing equipment.
All outputs from FAMAGA are ensured - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this quantity is growing every day. We are proud that users choose FAMAGA again and again, and we are glad to make more progressive and technologically developed industrial equipment so as stay in control.
To request or place an order, phone us or write to the online chat on our official website. You can also forward a list of the needful equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Part Number | - | A | - | B | - | T | ||||||||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | |||||||||||||
PD | F | Q | M | - | 255 | - | 220 | - | 15 |
Part Number | 0.5mm Increment | T Selectable/Configurable | |||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | ||
A≥B | |||||||
Standard | PD | L (Rolled) | N | P Q N M | 25~ 500 | 10~ 300 | 5, 6, 8, 10, 12, 15, 20, 25, 30, 40, 50 |
Large | L-PD | 250~ 2500 | 20~ 1250 | 3, 4, 5, 6, 8, 10, 12, 15, 20, 25, 30, 35, 40, 45, 50 | |||
Standard | PD | F (Milled) | P Q N M | P Q N M | 25~ 500 | 10~ 300 | 5~49 (0.5mm Increment) |
Large | L-PD | 250~ 2400 | 20~ 800 | 5~50 (0.5mm Increment) | |||
Standard | PD | S (Surface Grinding) | 25~ 500 | 10~ 300 | 5~49 (0.5mm Increment) |
Upper-Lower Surface Finish | Available for N only | ||||||||||
T Dimension | |||||||||||
3 | 4, 5 | 6 | 8 | 10 | 12, 15 | 20 | 25 | 30, 35 | 40 | 45, 50 | |
L(Rolled) | 0.2 | 0.35 | 0.45 | 0.5 | 0.6 | 0.7 | 0.8 | 0.9 | 1.0 | 1.1 | 1.3 |
Upper-Lower Surface Finish | A, B Length | P | Q | N | M |
L (Rolled) F (Milled) S (Surface Grinding) | 250mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
250.5mm or More | +0.1~+0.6 | 0~+0.5 | 0.25 | -0.5~0 |
Upper-Lower Surface Finish | A, B Length | P | Q | N | M |
F (Milled) | 550mm or Less | +0.1~+0.3 | 0~0.2 | 0.1 | -0.2~0 |
550.5mm or More | +0.1~+0.4 | 0~0.3 | 0.15 | -0.3~0 | |
S (Surface Grinding) | +0.1~+0.2 | 0~0.1 | 0.05 | -0.1~0 |
Item | Upper-Lower Surface Finish | |||
L (Rolled) | F (Milled) | S (Surface Grinding) | ||
Thickness Parallelism (per 100mm) | T3~ 6.5 | - | 0.05 | 0.025 |
T7~ 12.5 | 0.03 | |||
T13~ 15.5 | 0.05 | |||
T16~ 20.5 | 0.07 | 0.07 | ||
T21~ 50 | 0.1 | 0.1 | ||
Flatness (per 100mm) | T3~ 8.5 | 0.2 | 0.15 | 0.12 |
T9~ 12.5 | 0.13 | 0.06 | ||
T13~ 20.5 | 0.12 | |||
T21~ 50 | 0.1 | |||
Perpendicularity of Datum Plane | 0.015 per 100mm | |||
Circumference Chamfering | Standard | C0.3 or Less | ||
Large | C0.1 Fine Chamfering |