We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
L-PCSNM-[300.5-800/0.5]-[100-500/0.5]-[10-50/0.5]
Description
EN 1.1206 Equiv. Plates/3 Configurable Dimensions
Stock availability:
On request
If you are questing MISUMI L-PCSNM-[300.5-800/0.5]-[100-500/0.5]-[10-50/0.5], reach FAMAGA, the world's dominant retailer of mechanized equipment. Our company has progressed for more than ten years - these are ages of experience, which are depicted in the quality of outcomes and individual attention to each user. We value everyone, who collaborated with us - so, our regular clients accept the most acceptable purchase conditions and discounts on the factory-made equipment market. At this moment, there are more than 4000 such buyers, and we constantly arrange new agreements. More than 600 agreements are achieved per day, because FAMAGA operates all over the planet Germany, United Kingdom, Vietnam, New Zealand, Italy, Rwanda, Brazil, Namibia, Mongolia, South Korea, North Korea, Philippines, Romania, Cameroon, Senegal, Bulgaria, Brunei, Turkmenistan, Libya, East Timor, Armenia, Ghana, Togo, Russia, The Bahamas, Ecuador, United Arab Emirates, Ireland, Madagascar, Qatar, Mozambique, Finland, Kazakhstan, Dominica, Mauritius, Nepal, Niger, El Salvador, Macedonia, Uganda, Bolivia, Tanzania. A well-developed logistics bond and a partnership network cheer us to ship our elements anywhere in the planet immediately without compromising product quality.
A specific source of honor for FAMAGA is its personnel, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the sphere of factory-made equipment.
All outputs from FAMAGA are verified - we are responsible for the result of our work. Now, more than 10 million units of products have been delivered, and this number is rising every day. We are glad that purchasers choose FAMAGA again and again, and we are eager to make more progressive and technologically developed industrial equipment so as keep on top of it.
To consult or place an order, call us by phone or write a message to the online chat on our official website. You can also dispatch a list of the needful equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Part Number | - | A | - | B | - | T | ||||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | |||||||||
PC | F | Q | M | - | 255 | - | 220 | - | 18 |
6-Surface Finish | |||||||
Part Number | 0.5mm Increment | ||||||
Upper-Lower Finish Method | Type | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | T | |
AB | |||||||
Milled | Standard | PCF | P Q N M | P Q N M | 20~500 | 20~300 | 4~50 |
Large | L-PCF | 300.5~2000 | 100~800 | 10~50 | |||
Rotary Grinding | Standard | PCR | 20~500 | 20~300 | 4~50 | ||
Large | L-PCR | 300.5~1400 | 100~1000 | 10~50 | |||
Surface Grinding | Standard | PCS | 20~500 | 20~300 | 4~50 | ||
Large | L-PCS | 300.5~800 | 100~500 | 10~50 |
Upper-Lower Finish Method | P | Q | N | M |
Milled | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
Rotary Grinding | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
Surface Grinding | +0.1~+0.2 | 0~+0.1 | 0.05 | -0.1~0 |
A, B Dimension | P | Q | N | M |
250mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
250.5mm or More | +0.1~+0.6 | 0~+0.5 | 0.25 | -0.5~0 |
Item | Upper-Lower Finish Method | |||
Milled | Rotary Grinding | Surface Grinding | ||
Thickness Parallelism (per 100mm) | 0.05 | 0.012 | 0.012 | |
Flatness (per 100mm) | T4~7.5 | 0.1 | 0.05 | 0.05 |
T8~15.5 | 0.07 | 0.03 | 0.03 | |
T16~25.5 | 0.05 | 0.015 | 0.015 | |
T26~50 | 0.05 | 0.012 | 0.012 | |
Perpendicularity of Datum Plane | 0.015 per 100mm | |||
Circumference Chamfering | 6-Surface Finish | C0.2~C0.5 |
Item | Milled | Rotary Grinding | Surface Grinding | ||||||
A, B Dimension | ~500 | ~1000 | 1000.5~ | ~500 | ~1000 | 1000.5~ | ~500 | 500.5~ | |
Flatness (per O.A.L.) | T10~19.5 | 0.3 | 0.4 | 0.5 | 0.3 | 0.4 | 0.5 | 0.1 | 0.2 |
T20~29.5 | 0.2 | 0.3 | 0.5 | 0.2 | 0.3 | 0.5 | 0.05 | 0.1 | |
T30~50 | 0.2 | 0.3 | 0.3 | 0.2 | 0.3 | 0.3 | 0.05 | 0.1 | |
Thickness Parallelism(per 100mm) | 0.05 | 0.012 | 0.012 | ||||||
Perpendicularity of Datum Plane | 0.015 per 100mm | ||||||||
Circumference Chamfering | 6-Surface Finish | C0.2~C0.5 |