We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
L-PCFQM-[300.5-2000/0.5]-[100-800/0.5]-[10-50/0.5]
Description
EN 1.1206 Equiv. Plates/3 Configurable Dimensions
Stock availability:
On request
If you are pursuing MISUMI L-PCFQM-[300.5-2000/0.5]-[100-800/0.5]-[10-50/0.5], reach FAMAGA, the world's main company of industrial equipment. Our company has advanced for more than ten years - these are ages of experience, which are depicted in the quality of outcomes and special attention to each customer. We value everyone, who worked with us - so, our regular buyers bring in the most acceptable purchase conditions and discounts on the factory-made equipment market. At this moment, there are more than 4000 such purchasers, and we constantly form new agreements. More than 650 agreements are achieved per day, because FAMAGA operates all over the planet Germany, United Kingdom, Finland, Sri Lanka, Eritrea, Thailand, Bahamas, Kazakhstan, Italy, Libya, Chile, Swaziland, Armenia, Grenada, Canada, China, Angola, Kiribati, Colombia, Algeria, Equatorial Guinea, Costa Rica, Tonga, New Zealand, The Bahamas, Brazil, Bangladesh, Botswana, United Arab Emirates, Eswatini, Albania, Afghanistan, South Sudan, East Timor, Luxembourg, Nepal, South Korea, Uganda, The Gambia, Malta, Russia, Ghana, Vietnam, Namibia, Croatia, Pakistan, Zambia. A well-built logistics connection and a partnership network cheer us to deliver our elements anywhere in the planet immediately without disreputing product quality.
A specific source of repute for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the sphere of factory-made equipment.
All merchandises from FAMAGA are ensured - we are responsible for the result of our work. Now, more than 10 million units of products have been delivered, and this number is amounting every day. We are glad that buyers choose FAMAGA again and again, and we are pleased to make more advanced and technologically advanced industrial equipment so as keep on top of it.
To get some advice or place an order, call us by phone or write a message to the online chat on our official website. You can also dispatch a list of the needful equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Part Number | - | A | - | B | - | T | ||||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | |||||||||
PC | F | Q | M | - | 255 | - | 220 | - | 18 |
6-Surface Finish | |||||||
Part Number | 0.5mm Increment | ||||||
Upper-Lower Finish Method | Type | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | T | |
AB | |||||||
Milled | Standard | PCF | P Q N M | P Q N M | 20~500 | 20~300 | 4~50 |
Large | L-PCF | 300.5~2000 | 100~800 | 10~50 | |||
Rotary Grinding | Standard | PCR | 20~500 | 20~300 | 4~50 | ||
Large | L-PCR | 300.5~1400 | 100~1000 | 10~50 | |||
Surface Grinding | Standard | PCS | 20~500 | 20~300 | 4~50 | ||
Large | L-PCS | 300.5~800 | 100~500 | 10~50 |
Upper-Lower Finish Method | P | Q | N | M |
Milled | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
Rotary Grinding | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
Surface Grinding | +0.1~+0.2 | 0~+0.1 | 0.05 | -0.1~0 |
A, B Dimension | P | Q | N | M |
250mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
250.5mm or More | +0.1~+0.6 | 0~+0.5 | 0.25 | -0.5~0 |
Item | Upper-Lower Finish Method | |||
Milled | Rotary Grinding | Surface Grinding | ||
Thickness Parallelism (per 100mm) | 0.05 | 0.012 | 0.012 | |
Flatness (per 100mm) | T4~7.5 | 0.1 | 0.05 | 0.05 |
T8~15.5 | 0.07 | 0.03 | 0.03 | |
T16~25.5 | 0.05 | 0.015 | 0.015 | |
T26~50 | 0.05 | 0.012 | 0.012 | |
Perpendicularity of Datum Plane | 0.015 per 100mm | |||
Circumference Chamfering | 6-Surface Finish | C0.2~C0.5 |
Item | Milled | Rotary Grinding | Surface Grinding | ||||||
A, B Dimension | ~500 | ~1000 | 1000.5~ | ~500 | ~1000 | 1000.5~ | ~500 | 500.5~ | |
Flatness (per O.A.L.) | T10~19.5 | 0.3 | 0.4 | 0.5 | 0.3 | 0.4 | 0.5 | 0.1 | 0.2 |
T20~29.5 | 0.2 | 0.3 | 0.5 | 0.2 | 0.3 | 0.5 | 0.05 | 0.1 | |
T30~50 | 0.2 | 0.3 | 0.3 | 0.2 | 0.3 | 0.3 | 0.05 | 0.1 | |
Thickness Parallelism(per 100mm) | 0.05 | 0.012 | 0.012 | ||||||
Perpendicularity of Datum Plane | 0.015 per 100mm | ||||||||
Circumference Chamfering | 6-Surface Finish | C0.2~C0.5 |