We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
H-PNFNN-[7-1600/0.5]-[8-19.5/0.5]-[3-29.5/0.5]
Description
EN AW-5052 Equiv. Configurable Aluminum Plates
Stock availability:
On request
If you are seeking MISUMI H-PNFNN-[7-1600/0.5]-[8-19.5/0.5]-[3-29.5/0.5], catch up with FAMAGA, the world's central vendor of streamlined equipment. Our company has lasted for more than ten years - these are years of experience, which are described in the quality of products and particular attention to each consumer. We admire everyone, who cooperated with us - hence, our regular buyers get the most acceptable purchase forms and discounts on the manufacturing equipment market. At this moment, there are more than 4 thousand such buyers, and we constantly make new agreements. More than 650 transactions are made per day, because FAMAGA works all over the globe Germany, United Kingdom, Lesotho, Turkey, Netherlands, Burma, Guinea, Myanmar, Jordan, Congo, Ecuador, Mauritius, Malawi, Afghanistan, Vietnam, Denmark, Paraguay, Lithuania, Comoros, Malta, Guatemala, Burundi, India, Dominica, Australia, Hungary, Belarus, Senegal, Fiji, Mongolia, Norway, Ghana, Tonga, Iraq, Kenya, Greece, United States, Laos, Cameroon, Israel, Morocco, Moldova, Iran, Yemen. A well-built logistics series and a partnership network allow us to send our elements anywhere in the earth as soon as possible without compromising product quality.
A special source of honor for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only experts, who already have experience in the direction of industrial equipment.
All goods from FAMAGA are ensured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been provided, and this quantity is rising every day. We are happy that users choose FAMAGA again and again, and we are eager to make more progressive and technologically modern industrial equipment so as stay in control.
To inquire or book, phone us or write a message to the online chat on our site. You can also dispatch a list of the necessary equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Part Number | - | A | - | B | - | T | ||||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | |||||||||
PN | F | Q | M | - | 255 | - | 220 | - | 18 |
Part Number | 0.5mm Increment | T Selectable/Configurable | |||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | ||
AB | |||||||
Standard | PN | L (Rolled) | N | P Q N M | 25~ 500 | 10~ 300 | 5, 6, 8, 10, 12, 15, 20, 25, 30 , 40 , 50 |
Narrow Size | H-PN | 6~ 1600 | 6~ 19.5 | 3, 4, 5, 6, 8, 10, 12, 15, 20, 25, 30, 35 | |||
Large | L-PN | 250~ 3000 | 20~ 1500 | 3, 4, 5, 6, 8, 10, 12, 15, 20, 25, 30, 35, 40, 45, 50 | |||
Standard | PN | F (Milled) | P Q N M | P Q N M | 25~ 500 | 10~ 300 | 5~49 (0.5mm Increment) |
Narrow Size | H-PN | 7~ 1600 | 8~ 19.5 | 3~29.5 (0.5mm Increment) | |||
Large | L-PN | 250~ 3000 | 20~ 800 | 5~50 (0.5mm Increment) | |||
Standard | PN | S (Surface Grinding) | 25~ 500 | 10~ 300 | 5, 6, 7~49 (0.5mm Increment) |
Upper-Lower Surface Finish | Available for N only | ||||||||||
T Dimension | |||||||||||
3 | 4, 5 | 6 | 8 | 10 | 12, 15 | 20 | 25 | 30, 35 | 40 | 45, 50 | |
N (Rolled) | 0.2 | 0.35 | 0.45 | 0.5 | 0.6 | 0.7 | 0.8 | 0.9 | 1.0 | 1.1 | 1.3 |
Upper-Lower Surface Finish | A, B Dimension | P | Q | N | M |
L (Rolled) F (Milled) S (Surface Grinding) | 250mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
250.5mm or More | +0.1~+0.6 | 0~+0.5 | 0.25 | -0.5~0 |
Upper-Lower Surface Finish | A, B Length | P | Q | N | M |
F (Milled) | 550mm or Less | +0.1~+0.3 | 0~0.2 | 0.1 | -0.2~0 |
550.5mm or More | +0.1~+0.4 | 0~0.3 | 0.15 | -0.3~0 | |
S (Surface Grinding) | +0.1~+0.2 | 0~0.1 | 0.05 | -0.1~0 |
Item | Upper-Lower Surface Finish | |||
L (Rolled) | F (Milled) | S (Surface Grinding) | ||
Thickness Parallelism (per 100mm) | T3~6.5 | - | 0.05 | 0.025 |
T7~12.5 | 0.03 | |||
T13~15.5 | 0.05 | |||
T16~20.5 | 0.07 | 0.07 | ||
T21~50 | 0.1 | 0.1 | ||
Flatness (per 100mm) | T3~8.5 | 0.15 | 0.15 | 0.12 |
T9~12.5 | 0.13 | 0.06 | ||
T13~20.5 | 0.12 | |||
T21~50 | 0.1 | |||
Perpendicularity of Datum Plane | 0.015 per 100mm | |||
Circumference Chamfering | Standard | C0.3 or Less | ||
Narrow / Large | C0.1 Fine Chamfering |