We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
H-PAFNQ-[150-800/0.5]-[10-19.5/0.5]-[5-19.5/0.5]
Description
EN 1.4301 Equiv. Plates/3 Configurable Dimensions
Stock availability:
On request
If you are seeking MISUMI H-PAFNQ-[150-800/0.5]-[10-19.5/0.5]-[5-19.5/0.5], call FAMAGA, the world's main company of industrial equipment. Our company has advanced for more than ten years - these are years of experience, which are illustrated in the quality of outputs and particular attention to each customer. We cherish everyone, who worked with us - hence, our regular buyers pick up the most helpful purchase forms and discounts on the manufacturing equipment market. At this moment, there are more than 4 thousand such buyers, and we constantly make new agreements. More than 650 transactions are made per day, because FAMAGA works all over the globe Germany, United Kingdom, Spain, Côte d\'Ivoire, Croatia, Burundi, Jordan, Liechtenstein, Kiribati, Kenya, Malawi, Mauritius, Belgium, Botswana, Lithuania, Bangladesh, Libya, Syria, Iceland, Brunei, Macedonia, Slovakia, Turkmenistan, Liberia, Uzbekistan, Iran, Kuwait, Bosnia and Herzegovina, Vietnam, Rwanda, Fiji, Namibia, Algeria, Laos, Denmark, Argentina, Paraguay, Madagascar, Kyrgyzstan, Nigeria, Australia, Tunisia, Montenegro, Cameroon, Antigua and Barbuda. A well-built logistics system and a partnership network allow us to send our elements anywhere in the earth as soon as possible without damaging product quality.
A special source of honor for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only experts, who already have experience in the direction of industrial equipment.
All merchandises from FAMAGA are ensured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been provided, and this bulk is ascending every day. We are glad that users choose FAMAGA again and again, and we are eager to make more progressive and technologically modern industrial equipment so as keep on top of it.
To consult or book, phone us or write a message to the online chat on our site. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Part Number | - | A | - | B | - | T | ||||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | |||||||||
PA | F | Q | M | - | 255 | - | 136 | - | 18 |
Part Number | 0.5mm Increment | |||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | T |
AB | ||||||
PA (Standard Size) | F (Milled) R (Rotary Grinding) | P Q N M | P Q N M | 15~500 | 10~200 | 5~ 50 |
H-PA (Narrow) | F (Milled) | 150~800 | 10~19.5 | 5~ 19.5 | ||
L-PA (Large) | 200.5~1200 | 20~1000 | 5~ 50 |
Upper-Lower Surface Finish | A, B Dimension | P | Q | N | M |
F (Milled), R (Rotary Grinding) | 550mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
550.5mm or More | +0.1~+0.4 | 0~+0.3 | 0.15 | -0.3~0 |
Upper-Lower Surface Finish | A, B Dimension | P | Q | N | M |
F (Milled), R (Rotary Grinding) | 250mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
250.5mm or More | +0.1~+0.6 | 0~+0.5 | 0.25 | -0.5~0 |
Item | Upper-Lower Surface Finish | ||
F (Milled) | R (Rotary Grinding) | ||
Thickness Parallelism (per 100mm) | 0.05 | 0.012 | |
Flatness (per 100mm) | T5~7.5 | 0.1 | 0.05 |
T8~15.5 | 0.07 | 0.03 | |
T16~25.5 | 0.05 | 0.015 | |
T26~50 | 0.05 | 0.012 | |
Perpendicularity of Datum Plane | 0.015 per 100mm | ||
Circumference Chamfering | Standard | C0.2~C0.5 | |
Narrow / Large | C0.1 Fine Chamfering |