We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
H-PAFMP-[150-800/0.5]-[10-19.5/0.5]-[5-19.5/0.5]
Description
EN 1.4301 Equiv. Plates/3 Configurable Dimensions
Stock availability:
On request
If you are seeking MISUMI H-PAFMP-[150-800/0.5]-[10-19.5/0.5]-[5-19.5/0.5], communicate with FAMAGA, the world's central vendor of streamlined equipment. Our company has lasted for more than ten years - these are cycles of experience, which are expressed in the quality of items and particular attention to each consumer. We esteem everyone, who engaged with us - so, our regular buyers procure the most beneficial purchase terms and discounts on the factory-made equipment market. At this time, there are more than 4500 such buyers, and we constantly make new agreements. More than 700 proceedings are resolved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Sri Lanka, Guinea-Bissau, Andorra, Georgia, Jamaica, Russia, Estonia, Djibouti, Japan, Iraq, Canada, Moldova, Botswana, Costa Rica, Afghanistan, Equatorial Guinea, Albania, Thailand, Cape Verde, Burkina Faso, South Sudan, Fiji, Suriname, New Zealand, Guyana, Ukraine, Seychelles, Belize, Ireland, Tajikistan, Samoa, Vietnam, Guatemala, Latvia, Senegal, Comoros, Peru, Sweden, Croatia, Yemen, Malaysia, Philippines. A well-built logistics series and a partnership network let us to send our goods anywhere in the planet promptly without damaging product quality.
A particular source of honor for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the sphere of factory-made equipment.
All goods from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been delivered, and this number is ascending every day. We are happy that clients choose FAMAGA again and again, and we are eager to make more developed and technologically developed industrial equipment so as not to lower the bar.
To consult or make a request, get in touch with us or send a message to the online chat on our site. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Part Number | - | A | - | B | - | T | ||||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | |||||||||
PA | F | Q | M | - | 255 | - | 136 | - | 18 |
Part Number | 0.5mm Increment | |||||
Type | Upper-Lower Surface Finish | Plate Thickness Tolerance | A, B Dimension Tolerance | A | B | T |
AB | ||||||
PA (Standard Size) | F (Milled) R (Rotary Grinding) | P Q N M | P Q N M | 15~500 | 10~200 | 5~ 50 |
H-PA (Narrow) | F (Milled) | 150~800 | 10~19.5 | 5~ 19.5 | ||
L-PA (Large) | 200.5~1200 | 20~1000 | 5~ 50 |
Upper-Lower Surface Finish | A, B Dimension | P | Q | N | M |
F (Milled), R (Rotary Grinding) | 550mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
550.5mm or More | +0.1~+0.4 | 0~+0.3 | 0.15 | -0.3~0 |
Upper-Lower Surface Finish | A, B Dimension | P | Q | N | M |
F (Milled), R (Rotary Grinding) | 250mm or Less | +0.1~+0.3 | 0~+0.2 | 0.1 | -0.2~0 |
250.5mm or More | +0.1~+0.6 | 0~+0.5 | 0.25 | -0.5~0 |
Item | Upper-Lower Surface Finish | ||
F (Milled) | R (Rotary Grinding) | ||
Thickness Parallelism (per 100mm) | 0.05 | 0.012 | |
Flatness (per 100mm) | T5~7.5 | 0.1 | 0.05 |
T8~15.5 | 0.07 | 0.03 | |
T16~25.5 | 0.05 | 0.015 | |
T26~50 | 0.05 | 0.012 | |
Perpendicularity of Datum Plane | 0.015 per 100mm | ||
Circumference Chamfering | Standard | C0.2~C0.5 | |
Narrow / Large | C0.1 Fine Chamfering |