We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SMSB5.5-25
Description
Shoulder Bolts/Tolerance e9/EN 1.7220 Equiv.
Stock availability:
On request
If you are questing MISUMI SMSB5.5-25, reach FAMAGA, the world's prime supplier of mechanized equipment. Our company has existed for more than ten years - these are cycles of experience, which are illustrated in the quality of outputs and personalseparate attention to each buyer. We value everyone, who joined with us - so, our regular buyers bring in the most desirable purchase terms and discounts on the industrial equipment market. Now, there are more than 3500 such clients, and we constantly form new agreements. More than 700 contracts are concluded per day, because FAMAGA operates all over the world Germany, United Kingdom, Liechtenstein, Gambia, Myanmar, Saudi Arabia, Laos, Turkey, Antigua and Barbuda, El Salvador, Belarus, Guinea, Haiti, Malta, Grenada, Costa Rica, Belgium, Luxembourg, Andorra, Japan, Sudan, Belize, Namibia, Kuwait, Ukraine, Bosnia and Herzegovina, South Sudan, Kiribati, Montenegro, Tanzania, Uganda, Hungary, Estonia, North Korea, Turkmenistan, Australia, Kyrgyzstan, Mongolia, Angola, Czech Republic, Jamaica, Zambia, Niger, Malaysia, Slovakia, Libya, Mali, New Zealand. A well-built logistics connection and a partnership network assist us to send our goods anywhere in the globe with no delay without discrediting product quality.
A specific source of repute for FAMAGA is its workers, each of whom contributes to our work. We call into our team only specialists, who already have experience in the field of industrial equipment.
All merchandises from FAMAGA are verified - we are responsible for the result of our work. Now, more than 10 million units of products have been delivered, and this bulk is increasing every day. We are proud that buyers choose FAMAGA again and again, and we are glad to make more progressive and technologically developed industrial equipment so as stay in control.
To inquire or place an order, call us by phone or write a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
MSB | MSBMF | SMSB, SMSBF | |
Material | EN 1.7220 Equiv. | EN 1.7220 Equiv. | EN 1.4301 Equiv. |
Hardness | 33~38HRC | 33~38HRC | - |
Surface Treatment | - | Electroless Nickel Plating | - |
Strength Class | 10.9 | 10.9 | A2-50 |
Part Number | - | L | - | F |
MSB10 SMSBF5.5 | - | 50 L30 | - | F10 |
De9 | A | B | C | E | MxP | T | |
4 | -0.020 -0.050 | 6.5 | 2.5 | 1.6 | 3 | 2.5x0.45 | 4.5 |
4.5 | 7 | 3x0.5 | 5 | ||||
5 | 8 | 3.5 | 5.5 | ||||
5.5 | 9 | 3 | 2.2 | 4 | 4x0.7 | 6 | |
6 | 2 | 6.5 | |||||
6.5 | -0.025 -0.061 | 10 | 4 | 2.5 | 5 | 5x0.8 | 7 |
8 | 13 | 5 | 3 | 6 | 6x1.0 | 8.7 | |
10 | 16 | 6 | 4 | 8 | 8x1.25 | 10.8 | |
12 | -0.032 -0.075 | 17 | 12.8 | ||||
13 | 18 | 8 | 5 | 10 | 10x1.5 | 14 | |
16 | 24 | 10 | 7 | 14 | 12x1.75 | 17 | |
20 | -0.040 -0.092 | 27 | 14 | 9 | 18 | 16x2.0 | 21 |
Part Number | L (SMSB is applicable only to sizes marked with *.) | F | Unit Price | |||||||||||||||||||||||||
Type | D | MSB | SMSB | |||||||||||||||||||||||||
MSB SMSB | 4 | *15 | *20 | *25 | *30 | 35 | *40 | 5 | ||||||||||||||||||||
*10 | 45 | |||||||||||||||||||||||||||
4.5 | *15 | *20 | *25 | *30 | *35 | *40 | 6 | |||||||||||||||||||||
*10 | 45 | 50 | ||||||||||||||||||||||||||
5 | *15 | *20 | *25 | *30 | 35 | *40 | ||||||||||||||||||||||
*10 | 45 | 50 | ||||||||||||||||||||||||||
5.5 | *15 | *20 | *25 | *30 | *35 | *40 | 7 | |||||||||||||||||||||
*10 | 45 | 50 | 55 | |||||||||||||||||||||||||
6 | *15 | *20 | *25 | *30 | 35 | *40 | ||||||||||||||||||||||
*10 | 45 | 50 | 55 | 60 | 65 | 70 | ||||||||||||||||||||||
6.5 | *15 | *20 | *25 | *30 | *35 | *40 | 9 | |||||||||||||||||||||
*10 | *45 | *50 | 55 | 60 | 65 | 70 | 75 | 80 | ||||||||||||||||||||
8 | *15 | *20 | *25 | *30 | *35 | *40 | *45 | |||||||||||||||||||||
*10 | *50 | *55 | *60 | *65 | *70 | *75 | *80 | 85 | 90 | |||||||||||||||||||
95 | 100 | 110 | 120 | |||||||||||||||||||||||||
10 | *15 | *20 | *25 | *30 | *35 | *40 | *45 | *50 | *55 | 12 | ||||||||||||||||||
*60 | *65 | *70 | *75 | |||||||||||||||||||||||||
*10 | *80 | *85 | *90 | 95 | 100 | 110 | 120 | |||||||||||||||||||||
12 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | - | ||||||||||||||||||
60 | 65 | 70 | 75 | |||||||||||||||||||||||||
10 | 80 | 85 | 90 | 95 | 100 | |||||||||||||||||||||||
13 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 16 | - | ||||||||||||||
75 | 80 | 85 | 90 | 95 | 100 | |||||||||||||||||||||||
10 | 110 | 120 | 130 | |||||||||||||||||||||||||
16 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 75 | 80 | 85 | 18 | - | |||||||||||
90 | 95 | 100 | ||||||||||||||||||||||||||
110 | 120 | 130 | 140 | 150 | ||||||||||||||||||||||||
20 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 24 | - | |||||||||||||||||||
110 | 120 | 130 | 140 | 150 |
Part Number | L 0.1mm Increment | F 0.5mm Increment | A | B | C | E | T | L+F Machining Conditions | Unit Price | |||
Type | De9 | MSBMF | SMSBF | |||||||||
MSBMF SMSBF | 4 | -0.020 -0.050 | 10~40 | MFMx3 | 7 | 2.5 | 1.6 | 3 | 4.5 | L+F46 | ||
4.5 | 10~40 | 5 | L+F46 | |||||||||
5 | 10~40 | 9 | 3 | 2.2 | 4 | 5.5 | L+F47 | |||||
5.5 | 10~40 | 6 | L+F47 | |||||||||
6 | 10~50 | 10 | 4 | 2.5 | 5 | 6.5 | L+F59 | |||||
6.5 | -0.025 -0.061 | 10~50 | 7 | L+F59 | ||||||||
8 | 10~60 | 13 | 5 | 3 | 6 | 8.7 | L+F70 | |||||
10 | 10~60 | 16 | 6 | 4 | 8 | 10.8 | L+F72 |