We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
MSSU2.6-4
Description
Hex Socket Set Screws/Shaped End similar DIN 913 / similar DIN 914
Stock availability:
On request
If you are seeking MISUMI MSSU2.6-4, connect FAMAGA, the world's top supplier of factory-made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are illustrated in the quality of outcomes and personalseparate attention to each orderer. We appreciate everyone, who engaged with us - therefore, our regular clients procure the most convenient purchase conditions and discounts on the industrial equipment market. Today, there are more than 3500 such buyers, and we constantly compose new agreements. More than 600 transactions are made per day, because FAMAGA supplies all over the world Germany, United Kingdom, Japan, Brazil, Egypt, Liechtenstein, Malawi, Djibouti, Slovakia, Oman, Lebanon, Macedonia, Brunei, Niger, Mali, Uzbekistan, Canada, Malaysia, East Timor, Syria, Dominica, South Sudan, Comoros, Burkina Faso, Panama, Tunisia, Latvia, Iceland, Jamaica, Nepal, Afghanistan, Belarus, Lithuania, Vietnam, Iraq, South Korea, Philippines, Benin, Libya, Mozambique, Peru, Morocco, Bosnia and Herzegovina, Suriname, Serbia. A well-developed logistics series and a partnership network cheer us to conduct our units anywhere in the planet promptly without damaging product quality.
A specific source of honor for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the field of machine made streamlined equipment.
All outputs from FAMAGA are ensured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been delivered, and this number is amounting every day. We are pleased that purchasers choose FAMAGA again and again, and we are pleased to make more developed and technologically developed industrial equipment so as keep on top of it.
To consult or make a request, call us by phone or write a message to the online chat on our site. You can also send a list of the necessary equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
M-L | |||
2-3 | 3-4 | 4-5 | 5-6 |
Type | Material | Hardness | Surface Treatment |
MSSK | EN 1.7220 Equiv. | 45HRC~ | Black Oxide |
MSSF | |||
MSST | |||
MSSU | EN 1.4301 Equiv. | - | - |
MSSFS | |||
MSSTS |
Part Number |
MSSF5 -10 |
MxP (Coarse) | B | C (Min.) | d (Max.) | ||
Flat End | Cone Point | Cup Point | |||
2x0.4 | 0.9 | 0.8 | 1 | 0.8 | 1 |
2.6x0.45 | 1.3 | 1.2 | 1.5 | 1.2 | 1.2 |
3x0.5 | 1.5 | 1.2 | 2 | 0.75 | 1.4 |
4x0.7 | 2 | 1.5 | 2.5 | 1 | 2 |
5x0.8 | 2.5 | 2 | 3.5 | 1.25 | 2.5 |
6x1.0 | 3 | 2 | 4 | 1.5 | 3 |
8x1.25 | 4 | 3 | 5.5 | 2 | 5 |
10x1.5 | 5 | 4 | 7 | 2.5 | 6 |
12x1.75 | 6 | 4.8 | 8.5 | 3 | 8 |
Part Number | MSSK (Cup Point) | MSSF (Flat End) | MSST (Cone Point) | MSSU (Cup Point) | MSSFS (Flat End) | MSSTS (Cone Point) | |||||||||||||||
Unit Price | Volume Discount Rate | Unit Price | Volume Discount Rate | Unit Price | Volume Discount Rate | Unit Price | Volume Discount Rate | Unit Price | Volume Discount Rate | Unit Price | Volume Discount Rate | ||||||||||
Type | M | - | L | 1 ~ 9 pc(s). | 10 ~ 199 pcs. | 200 ~ 500 pcs. | 1 ~ 9 pc(s). | 10 ~ 199 pcs. | 200 ~ 500 pcs. | 1 ~ 9 pc(s). | 10 ~ 199 pcs. | 200 ~ 500 pcs. | 1 ~ 9 pc(s). | 10 ~ 199 pcs. | 200 ~ 500 pcs. | 1 ~ 9 pc(s). | 10 ~ 199 pcs. | 200 ~ 500 pcs. | 1 ~ 9 pc(s). | 10 ~ 199 pcs. | 200 ~ 500 pcs. |
MSSK MSSF MSST (Stainless Steel) MSSU MSSFS MSSTS | 2 | - | 2 | ||||||||||||||||||
3 | |||||||||||||||||||||
4 | |||||||||||||||||||||
2.6 | - | 3 | |||||||||||||||||||
4 | |||||||||||||||||||||
5 | |||||||||||||||||||||
3 | - | 2.5 | - | - | - | - | - | - | |||||||||||||
3 | |||||||||||||||||||||
4 | |||||||||||||||||||||
5 | |||||||||||||||||||||
6 | |||||||||||||||||||||
8 | |||||||||||||||||||||
10 | |||||||||||||||||||||
12 | |||||||||||||||||||||
4 | - | 3 | - | - | - | - | - | - | |||||||||||||
4 | |||||||||||||||||||||
5 | |||||||||||||||||||||
6 | |||||||||||||||||||||
8 | |||||||||||||||||||||
10 | |||||||||||||||||||||
12 | |||||||||||||||||||||
15 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||||||
16 | - | - | - | ||||||||||||||||||
5 | - | 4 | - | - | - | ||||||||||||||||
5 | |||||||||||||||||||||
6 | |||||||||||||||||||||
8 | |||||||||||||||||||||
10 | |||||||||||||||||||||
12 | |||||||||||||||||||||
15 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||||||
16 | - | - | - | ||||||||||||||||||
20 | |||||||||||||||||||||
6 | - | 5 | - | - | - | ||||||||||||||||
6 | |||||||||||||||||||||
8 | |||||||||||||||||||||
10 | |||||||||||||||||||||
12 | |||||||||||||||||||||
15 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||||||
16 | - | - | - | ||||||||||||||||||
20 | |||||||||||||||||||||
25 | |||||||||||||||||||||
8 | - | 6 | - | - | - | ||||||||||||||||
8 | |||||||||||||||||||||
10 | |||||||||||||||||||||
12 | |||||||||||||||||||||
15 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||||||
16 | - | - | - | ||||||||||||||||||
20 | |||||||||||||||||||||
25 | |||||||||||||||||||||
30 | |||||||||||||||||||||
10 | - | 12 | - | - | - | - | - | - | - | - | - | - | - | - | |||||||
15 | - | - | - | - | - | - | - | - | - | - | - | - | |||||||||
20 | - | - | - | - | - | - | - | - | - | - | - | - | |||||||||
25 | - | - | - | - | - | - | - | - | - | - | - | - | |||||||||
30 | - | - | - | - | - | - | - | - | - | - | - | - | |||||||||
12 | - | 15 | - | - | - | - | - | - | - | - | - | - | - | - | |||||||
20 | - | - | - | - | - | - | - | - | - | - | - | - | |||||||||
25 | - | - | - | - | - | - | - | - | - | - | - | - | |||||||||
30 | - | - | - | - | - | - | - | - | - | - | - | - |