We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are inspecting MISUMI MSB16-20, contact FAMAGA, the world's primary vendor of industrialized equipment. Our company has existed for more than ten years - these are years of experience, which are depicted in the quality of items and special attention to each orderer. We esteem everyone, who collaborated with us - hence, our regular consumers bring in the most helpful purchase conditions and discounts on the industrial equipment market. At present, there are more than 3500 such customers, and we constantly form new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Nepal, Uruguay, United States, Portugal, Zimbabwe, Algeria, Iraq, Armenia, Sudan, Morocco, Jordan, Grenada, Guinea, Argentina, Zambia, Finland, Pakistan, Greece, Kiribati, Croatia, Ukraine, Paraguay, Nicaragua, Turkmenistan, Tonga, Brazil, Gambia, Kenya, Ecuador, Bangladesh, Turkey, Hungary, Mali, Macedonia, El Salvador, Kazakhstan, Switzerland, Kyrgyzstan, Australia, South Korea, Malta, Cape Verde, Eswatini, Mexico. A advanced logistics link and a partnership network allow us to send our units anywhere in the planet with no delay without compromising product quality.
A particular source of dignity for FAMAGA is its workers, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the sphere of factory-made equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been supplied, and this number is increasing every day. We are proud that customers choose FAMAGA again and again, and we are eager to make more exceptional and technologically innovative industrial equipment so as to stay on the top.
To consult or make a request, contact us or write to the online chat on our site. You can also send a list of the required equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
MSB | MSBMF | SMSB, SMSBF | |
Material | EN 1.7220 Equiv. | EN 1.7220 Equiv. | EN 1.4301 Equiv. |
Hardness | 33~38HRC | 33~38HRC | - |
Surface Treatment | - | Electroless Nickel Plating | - |
Strength Class | 10.9 | 10.9 | A2-50 |
Part Number | - | L | - | F |
MSB10 SMSBF5.5 | - | 50 L30 | - | F10 |
De9 | A | B | C | E | MxP | T | |
4 | -0.020 -0.050 | 6.5 | 2.5 | 1.6 | 3 | 2.5x0.45 | 4.5 |
4.5 | 7 | 3x0.5 | 5 | ||||
5 | 8 | 3.5 | 5.5 | ||||
5.5 | 9 | 3 | 2.2 | 4 | 4x0.7 | 6 | |
6 | 2 | 6.5 | |||||
6.5 | -0.025 -0.061 | 10 | 4 | 2.5 | 5 | 5x0.8 | 7 |
8 | 13 | 5 | 3 | 6 | 6x1.0 | 8.7 | |
10 | 16 | 6 | 4 | 8 | 8x1.25 | 10.8 | |
12 | -0.032 -0.075 | 17 | 12.8 | ||||
13 | 18 | 8 | 5 | 10 | 10x1.5 | 14 | |
16 | 24 | 10 | 7 | 14 | 12x1.75 | 17 | |
20 | -0.040 -0.092 | 27 | 14 | 9 | 18 | 16x2.0 | 21 |
Part Number | L (SMSB is applicable only to sizes marked with *.) | F | Unit Price | |||||||||||||||||||||||||
Type | D | MSB | SMSB | |||||||||||||||||||||||||
MSB SMSB | 4 | *15 | *20 | *25 | *30 | 35 | *40 | 5 | ||||||||||||||||||||
*10 | 45 | |||||||||||||||||||||||||||
4.5 | *15 | *20 | *25 | *30 | *35 | *40 | 6 | |||||||||||||||||||||
*10 | 45 | 50 | ||||||||||||||||||||||||||
5 | *15 | *20 | *25 | *30 | 35 | *40 | ||||||||||||||||||||||
*10 | 45 | 50 | ||||||||||||||||||||||||||
5.5 | *15 | *20 | *25 | *30 | *35 | *40 | 7 | |||||||||||||||||||||
*10 | 45 | 50 | 55 | |||||||||||||||||||||||||
6 | *15 | *20 | *25 | *30 | 35 | *40 | ||||||||||||||||||||||
*10 | 45 | 50 | 55 | 60 | 65 | 70 | ||||||||||||||||||||||
6.5 | *15 | *20 | *25 | *30 | *35 | *40 | 9 | |||||||||||||||||||||
*10 | *45 | *50 | 55 | 60 | 65 | 70 | 75 | 80 | ||||||||||||||||||||
8 | *15 | *20 | *25 | *30 | *35 | *40 | *45 | |||||||||||||||||||||
*10 | *50 | *55 | *60 | *65 | *70 | *75 | *80 | 85 | 90 | |||||||||||||||||||
95 | 100 | 110 | 120 | |||||||||||||||||||||||||
10 | *15 | *20 | *25 | *30 | *35 | *40 | *45 | *50 | *55 | 12 | ||||||||||||||||||
*60 | *65 | *70 | *75 | |||||||||||||||||||||||||
*10 | *80 | *85 | *90 | 95 | 100 | 110 | 120 | |||||||||||||||||||||
12 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | - | ||||||||||||||||||
60 | 65 | 70 | 75 | |||||||||||||||||||||||||
10 | 80 | 85 | 90 | 95 | 100 | |||||||||||||||||||||||
13 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 16 | - | ||||||||||||||
75 | 80 | 85 | 90 | 95 | 100 | |||||||||||||||||||||||
10 | 110 | 120 | 130 | |||||||||||||||||||||||||
16 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 75 | 80 | 85 | 18 | - | |||||||||||
90 | 95 | 100 | ||||||||||||||||||||||||||
110 | 120 | 130 | 140 | 150 | ||||||||||||||||||||||||
20 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 24 | - | |||||||||||||||||||
110 | 120 | 130 | 140 | 150 |
Part Number | L 0.1mm Increment | F 0.5mm Increment | A | B | C | E | T | L+F Machining Conditions | Unit Price | |||
Type | De9 | MSBMF | SMSBF | |||||||||
MSBMF SMSBF | 4 | -0.020 -0.050 | 10~40 | MFMx3 | 7 | 2.5 | 1.6 | 3 | 4.5 | L+F46 | ||
4.5 | 10~40 | 5 | L+F46 | |||||||||
5 | 10~40 | 9 | 3 | 2.2 | 4 | 5.5 | L+F47 | |||||
5.5 | 10~40 | 6 | L+F47 | |||||||||
6 | 10~50 | 10 | 4 | 2.5 | 5 | 6.5 | L+F59 | |||||
6.5 | -0.025 -0.061 | 10~50 | 7 | L+F59 | ||||||||
8 | 10~60 | 13 | 5 | 3 | 6 | 8.7 | L+F70 | |||||
10 | 10~60 | 16 | 6 | 4 | 8 | 10.8 | L+F72 |