We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are seeking MISUMI MSB13-50, communicate with FAMAGA, the world's main producer of manufacturing equipment. Our company has operated for more than ten years - these are years of experience, which are expressed in the quality of outcomes and personalseparate attention to each customer. We value everyone, who joined with us - hence, our regular buyers get the most acceptable purchase conditions and discounts on the industrial equipment market. At present, there are more than 3500 such clients, and we constantly compose new agreements. More than 750 agreements are achieved per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Haiti, Bosnia and Herzegovina, Mozambique, Bhutan, Honduras, Namibia, Belgium, Zimbabwe, Eswatini, Azerbaijan, Turkmenistan, Kyrgyzstan, Slovakia, Mauritania, Burkina Faso, Hungary, Greece, Togo, Zambia, Iran, Philippines, Cameroon, Kiribati, Libya, Antigua and Barbuda, Laos, Tonga, Fiji, Sudan, Ghana, Israel, Lithuania, Cyprus, New Zealand, Peru, Senegal, Iraq, Indonesia, Ukraine, Botswana, Nigeria, Nepal. A well-shaped logistics series and a partnership network allow us to deliver our units anywhere in the planet with no delay without disreputing product quality.
A particular source of honor for FAMAGA is its employees, each of whom contributes to common cause. We call into our team only professionals, who already have experience in the sphere of factory-made equipment.
All merchandises from FAMAGA are ensured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been supplied, and this amount is amounting every day. We are proud that customers choose FAMAGA again and again, and we strive to make more exceptional and technologically innovative industrial equipment so as to stay on the top.
To get some advice or make a request, contact us or write to the online chat on our site. You can also send a list of the required equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
MSB | MSBMF | SMSB, SMSBF | |
Material | EN 1.7220 Equiv. | EN 1.7220 Equiv. | EN 1.4301 Equiv. |
Hardness | 33~38HRC | 33~38HRC | - |
Surface Treatment | - | Electroless Nickel Plating | - |
Strength Class | 10.9 | 10.9 | A2-50 |
Part Number | - | L | - | F |
MSB10 SMSBF5.5 | - | 50 L30 | - | F10 |
De9 | A | B | C | E | MxP | T | |
4 | -0.020 -0.050 | 6.5 | 2.5 | 1.6 | 3 | 2.5x0.45 | 4.5 |
4.5 | 7 | 3x0.5 | 5 | ||||
5 | 8 | 3.5 | 5.5 | ||||
5.5 | 9 | 3 | 2.2 | 4 | 4x0.7 | 6 | |
6 | 2 | 6.5 | |||||
6.5 | -0.025 -0.061 | 10 | 4 | 2.5 | 5 | 5x0.8 | 7 |
8 | 13 | 5 | 3 | 6 | 6x1.0 | 8.7 | |
10 | 16 | 6 | 4 | 8 | 8x1.25 | 10.8 | |
12 | -0.032 -0.075 | 17 | 12.8 | ||||
13 | 18 | 8 | 5 | 10 | 10x1.5 | 14 | |
16 | 24 | 10 | 7 | 14 | 12x1.75 | 17 | |
20 | -0.040 -0.092 | 27 | 14 | 9 | 18 | 16x2.0 | 21 |
Part Number | L (SMSB is applicable only to sizes marked with *.) | F | Unit Price | |||||||||||||||||||||||||
Type | D | MSB | SMSB | |||||||||||||||||||||||||
MSB SMSB | 4 | *15 | *20 | *25 | *30 | 35 | *40 | 5 | ||||||||||||||||||||
*10 | 45 | |||||||||||||||||||||||||||
4.5 | *15 | *20 | *25 | *30 | *35 | *40 | 6 | |||||||||||||||||||||
*10 | 45 | 50 | ||||||||||||||||||||||||||
5 | *15 | *20 | *25 | *30 | 35 | *40 | ||||||||||||||||||||||
*10 | 45 | 50 | ||||||||||||||||||||||||||
5.5 | *15 | *20 | *25 | *30 | *35 | *40 | 7 | |||||||||||||||||||||
*10 | 45 | 50 | 55 | |||||||||||||||||||||||||
6 | *15 | *20 | *25 | *30 | 35 | *40 | ||||||||||||||||||||||
*10 | 45 | 50 | 55 | 60 | 65 | 70 | ||||||||||||||||||||||
6.5 | *15 | *20 | *25 | *30 | *35 | *40 | 9 | |||||||||||||||||||||
*10 | *45 | *50 | 55 | 60 | 65 | 70 | 75 | 80 | ||||||||||||||||||||
8 | *15 | *20 | *25 | *30 | *35 | *40 | *45 | |||||||||||||||||||||
*10 | *50 | *55 | *60 | *65 | *70 | *75 | *80 | 85 | 90 | |||||||||||||||||||
95 | 100 | 110 | 120 | |||||||||||||||||||||||||
10 | *15 | *20 | *25 | *30 | *35 | *40 | *45 | *50 | *55 | 12 | ||||||||||||||||||
*60 | *65 | *70 | *75 | |||||||||||||||||||||||||
*10 | *80 | *85 | *90 | 95 | 100 | 110 | 120 | |||||||||||||||||||||
12 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | - | ||||||||||||||||||
60 | 65 | 70 | 75 | |||||||||||||||||||||||||
10 | 80 | 85 | 90 | 95 | 100 | |||||||||||||||||||||||
13 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 16 | - | ||||||||||||||
75 | 80 | 85 | 90 | 95 | 100 | |||||||||||||||||||||||
10 | 110 | 120 | 130 | |||||||||||||||||||||||||
16 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 75 | 80 | 85 | 18 | - | |||||||||||
90 | 95 | 100 | ||||||||||||||||||||||||||
110 | 120 | 130 | 140 | 150 | ||||||||||||||||||||||||
20 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 24 | - | |||||||||||||||||||
110 | 120 | 130 | 140 | 150 |
Part Number | L 0.1mm Increment | F 0.5mm Increment | A | B | C | E | T | L+F Machining Conditions | Unit Price | |||
Type | De9 | MSBMF | SMSBF | |||||||||
MSBMF SMSBF | 4 | -0.020 -0.050 | 10~40 | MFMx3 | 7 | 2.5 | 1.6 | 3 | 4.5 | L+F46 | ||
4.5 | 10~40 | 5 | L+F46 | |||||||||
5 | 10~40 | 9 | 3 | 2.2 | 4 | 5.5 | L+F47 | |||||
5.5 | 10~40 | 6 | L+F47 | |||||||||
6 | 10~50 | 10 | 4 | 2.5 | 5 | 6.5 | L+F59 | |||||
6.5 | -0.025 -0.061 | 10~50 | 7 | L+F59 | ||||||||
8 | 10~60 | 13 | 5 | 3 | 6 | 8.7 | L+F70 | |||||
10 | 10~60 | 16 | 6 | 4 | 8 | 10.8 | L+F72 |