We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are seeking MISUMI MSB10-65, communicate with FAMAGA, the world's the best supplier of mechanized equipment. Our company has functioned for more than ten years - these are ages of experience, which are expressed in the quality of outcomes and personalseparate attention to each consumer. We value everyone, who cooperated with us - therefore, our regular consumers pick up the most acceptable purchase terms and discounts on the industrial equipment market. Now, there are more than 3500 such clients, and we constantly compose new agreements. More than 750 affairs are settled per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Malawi, Liberia, South Africa, Palestine, Costa Rica, Philippines, Turkey, Ecuador, Brazil, Macedonia, Guinea, Equatorial Guinea, Uruguay, Sweden, Syria, Uganda, The Gambia, Bulgaria, Burkina Faso, Ghana, Fiji, Samoa, Lithuania, Rwanda, Iraq, Laos, Uzbekistan, Kazakhstan, Namibia, Denmark, Azerbaijan, Bangladesh, Montenegro, United States, Tonga, Afghanistan, China, India, Tunisia, Hungary, Yemen, Libya, Eswatini. A well-shaped logistics chains and a partnership network guide us to deliver our goods anywhere in the planet immediately without disreputing product quality.
A specific source of dignity for FAMAGA is its staff members, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the sphere of factory-made equipment.
All goods from FAMAGA are ensured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been provided, and this bulk is amounting every day. We are proud that consumers choose FAMAGA again and again, and we strive to make more exceptional and technologically innovative industrial equipment so as to stay on the top.
To get some advice or place an order, get in touch with us or write a message to the online chat on our site. You can also send a list of the required equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
MSB | MSBMF | SMSB, SMSBF | |
Material | EN 1.7220 Equiv. | EN 1.7220 Equiv. | EN 1.4301 Equiv. |
Hardness | 33~38HRC | 33~38HRC | - |
Surface Treatment | - | Electroless Nickel Plating | - |
Strength Class | 10.9 | 10.9 | A2-50 |
Part Number | - | L | - | F |
MSB10 SMSBF5.5 | - | 50 L30 | - | F10 |
De9 | A | B | C | E | MxP | T | |
4 | -0.020 -0.050 | 6.5 | 2.5 | 1.6 | 3 | 2.5x0.45 | 4.5 |
4.5 | 7 | 3x0.5 | 5 | ||||
5 | 8 | 3.5 | 5.5 | ||||
5.5 | 9 | 3 | 2.2 | 4 | 4x0.7 | 6 | |
6 | 2 | 6.5 | |||||
6.5 | -0.025 -0.061 | 10 | 4 | 2.5 | 5 | 5x0.8 | 7 |
8 | 13 | 5 | 3 | 6 | 6x1.0 | 8.7 | |
10 | 16 | 6 | 4 | 8 | 8x1.25 | 10.8 | |
12 | -0.032 -0.075 | 17 | 12.8 | ||||
13 | 18 | 8 | 5 | 10 | 10x1.5 | 14 | |
16 | 24 | 10 | 7 | 14 | 12x1.75 | 17 | |
20 | -0.040 -0.092 | 27 | 14 | 9 | 18 | 16x2.0 | 21 |
Part Number | L (SMSB is applicable only to sizes marked with *.) | F | Unit Price | |||||||||||||||||||||||||
Type | D | MSB | SMSB | |||||||||||||||||||||||||
MSB SMSB | 4 | *15 | *20 | *25 | *30 | 35 | *40 | 5 | ||||||||||||||||||||
*10 | 45 | |||||||||||||||||||||||||||
4.5 | *15 | *20 | *25 | *30 | *35 | *40 | 6 | |||||||||||||||||||||
*10 | 45 | 50 | ||||||||||||||||||||||||||
5 | *15 | *20 | *25 | *30 | 35 | *40 | ||||||||||||||||||||||
*10 | 45 | 50 | ||||||||||||||||||||||||||
5.5 | *15 | *20 | *25 | *30 | *35 | *40 | 7 | |||||||||||||||||||||
*10 | 45 | 50 | 55 | |||||||||||||||||||||||||
6 | *15 | *20 | *25 | *30 | 35 | *40 | ||||||||||||||||||||||
*10 | 45 | 50 | 55 | 60 | 65 | 70 | ||||||||||||||||||||||
6.5 | *15 | *20 | *25 | *30 | *35 | *40 | 9 | |||||||||||||||||||||
*10 | *45 | *50 | 55 | 60 | 65 | 70 | 75 | 80 | ||||||||||||||||||||
8 | *15 | *20 | *25 | *30 | *35 | *40 | *45 | |||||||||||||||||||||
*10 | *50 | *55 | *60 | *65 | *70 | *75 | *80 | 85 | 90 | |||||||||||||||||||
95 | 100 | 110 | 120 | |||||||||||||||||||||||||
10 | *15 | *20 | *25 | *30 | *35 | *40 | *45 | *50 | *55 | 12 | ||||||||||||||||||
*60 | *65 | *70 | *75 | |||||||||||||||||||||||||
*10 | *80 | *85 | *90 | 95 | 100 | 110 | 120 | |||||||||||||||||||||
12 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | - | ||||||||||||||||||
60 | 65 | 70 | 75 | |||||||||||||||||||||||||
10 | 80 | 85 | 90 | 95 | 100 | |||||||||||||||||||||||
13 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 16 | - | ||||||||||||||
75 | 80 | 85 | 90 | 95 | 100 | |||||||||||||||||||||||
10 | 110 | 120 | 130 | |||||||||||||||||||||||||
16 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 75 | 80 | 85 | 18 | - | |||||||||||
90 | 95 | 100 | ||||||||||||||||||||||||||
110 | 120 | 130 | 140 | 150 | ||||||||||||||||||||||||
20 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 24 | - | |||||||||||||||||||
110 | 120 | 130 | 140 | 150 |
Part Number | L 0.1mm Increment | F 0.5mm Increment | A | B | C | E | T | L+F Machining Conditions | Unit Price | |||
Type | De9 | MSBMF | SMSBF | |||||||||
MSBMF SMSBF | 4 | -0.020 -0.050 | 10~40 | MFMx3 | 7 | 2.5 | 1.6 | 3 | 4.5 | L+F46 | ||
4.5 | 10~40 | 5 | L+F46 | |||||||||
5 | 10~40 | 9 | 3 | 2.2 | 4 | 5.5 | L+F47 | |||||
5.5 | 10~40 | 6 | L+F47 | |||||||||
6 | 10~50 | 10 | 4 | 2.5 | 5 | 6.5 | L+F59 | |||||
6.5 | -0.025 -0.061 | 10~50 | 7 | L+F59 | ||||||||
8 | 10~60 | 13 | 5 | 3 | 6 | 8.7 | L+F70 | |||||
10 | 10~60 | 16 | 6 | 4 | 8 | 10.8 | L+F72 |