We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
FWBN3-[20-100/1]-E[5-15/1]-F[0-15/1]
Description
Specified Threaded Rods - Fully Threaded similar DIN 6379
Stock availability:
On request
If you are pursuing MISUMI FWBN3-[20-100/1]-E[5-15/1]-F[0-15/1], reach FAMAGA, the world's top supplier of mechanized equipment. Our company has functioned for more than ten years - these are years of experience, which are symbolized in the quality of outcomes and personalseparate attention to each client. We value everyone, who engaged with us - hence, our regular buyers procure the most acceptable purchase terms and discounts on the factory-made equipment market. Nowadays, there are more than 4000 such buyers, and we constantly make new agreements. More than 600 proceedings are resolved per day, because FAMAGA works all over the planet Germany, United Kingdom, Bhutan, Japan, Swaziland, Italy, Singapore, Portugal, East Timor, Equatorial Guinea, Papua New Guinea, Belgium, Iceland, Kazakhstan, Canada, Ghana, India, Vietnam, Afghanistan, Nigeria, Indonesia, Djibouti, Tonga, Malta, Malaysia, Serbia, Brunei, Dominica, Burkina Faso, Peru, Kenya, Qatar, Jamaica, El Salvador, Zimbabwe, Morocco, Kyrgyzstan, Uganda, Cape Verde, Chile, South Korea, Finland, Mauritius, United Arab Emirates, Croatia, Seychelles. A well-developed logistics chains and a partnership network guide us to send our units anywhere in the earth with no delay without disreputing product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been provided, and this bulk is ascending every day. We are glad that customers choose FAMAGA again and again, and we are eager to make more progressive and technologically advanced industrial equipment so as to stay on the top.
To get some advice or make a request, call us by phone or write to the online chat on our site. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Type | Material | Surface Treatment | ||||
Studs - Fully Threaded | Both Ends Right-Hand Screws | |||||
Thread gauge class 2 is used. | Class 3 | Thread gauge class 2 is used. | ||||
Coarse | Fine | Coarse | Coarse | Fine | ||
FAB | FABP | FABM | FWB | FWBP | EN 1.1191 Equiv. | Black Oxide |
FABN | - | - | FWBN | - | Electroless Nickel Plating | |
FABS | FABSP | FABMS | FWBS | FWBSP | EN 1.4301 Equiv. | - |
Part Number | - | L | - | E | - | F |
FAB6 FWBS6 | - - | 100 100 | - | E10 | - | F10 |
M | Thread Pitch | |
Coarse | Fine | |
3 | 0.5 | - |
4 | 0.7 | - |
5 | 0.8 | 0.5 |
6 | 1 | 0.75 |
8 | 1.25 | 1 |
10 | 1.5 | 1.25 |
12 | 1.75 | 1.25 |
16 | 2 | 1.5 |
20 | 2.5 | 1.5 |
Part Number | L 1mm Increment | Unit Price | ||||||||||||||
Type | M | FAB | FABN | FABS | ||||||||||||
L20~100 | L101~200 | L201~400 | L401~600 | L601~800 | L20~100 | L101~200 | L201~400 | L401~600 | L20~100 | L101~200 | L201~400 | L401~600 | L601~800 | |||
(Class 2, Coarse) FAB FABN FABS | 3 | 20~150 | - | - | - | - | - | - | - | - | - | - | ||||
4 | 20~150 | - | - | - | - | - | - | - | - | - | - | |||||
5 | 20~250 | - | - | - | - | - | - | - | - | |||||||
6 | - | - | - | - | - | - | - | - | ||||||||
8 | 20~600 | - | - | - | - | - | - | |||||||||
10 | - | - | - | - | - | - | ||||||||||
12 | 20~800 | |||||||||||||||
16 | ||||||||||||||||
20 |
Part Number | L 1mm Increment | Unit Price | ||||||||||||||||||
Type | M | FABM | FABMS | FABP | FABSP | |||||||||||||||
L20~100 | L101~200 | L201~400 | L401~600 | L601~800 | L20~100 | L101~200 | L201~400 | L401~600 | L601~800 | L20~100 | L101~200 | L201~400 | L401~600 | L20~100 | L101~200 | L201~400 | L401~600 | |||
(Class 3, Coarse) FABM FABMS (Class 2, Fine) FABP FABSP | 4 | 20~150 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||||
5 | 20~250 | - | - | - | - | - | - | |||||||||||||
6 | - | - | - | - | - | - | ||||||||||||||
8 | 20~600 (400) | - | - | - | - | |||||||||||||||
10 | - | - | - | - | ||||||||||||||||
12 | 20~800 | |||||||||||||||||||
16 | ||||||||||||||||||||
20 |
Part Number | 1mm Increment | Unit Price | |||||||||||||||||
Type | M | L | E | F | FWB | FWBN | FWBS | ||||||||||||
L20~100 | L101~200 | L201~400 | L401~600 | L601~800 | L20~100 | L101~200 | L201~400 | L401~600 | L601~800 | L20~100 | L101~200 | L201~400 | L401~600 | L601~800 | |||||
(Class 2, Coarse) FWB FWBN FWBS | 3 | 20~100 | 5~15 | 0~15 | - | - | - | - | - | - | - | - | - | - | - | - | |||
4 | 20~150 | 5~100 | 0~100 | - | - | - | - | - | - | - | - | - | |||||||
5 | 20~250 | - | - | - | - | - | - | ||||||||||||
6 | - | - | - | - | - | - | |||||||||||||
8 | 20~600 | - | - | - | |||||||||||||||
10 | - | - | - | ||||||||||||||||
12 | 20~800 | ||||||||||||||||||
16 | |||||||||||||||||||
20 | |||||||||||||||||||
24 | - | - | - | - | - | ||||||||||||||
30 | - | - | - | - | - | ||||||||||||||
EMx5 FMx5 When F=0, threads are not machined on the F dimension side. |
Part Number | 1mm Increment | Unit Price | ||||||||||||
Type | M | L | E | F | FWBP | FWBSP | ||||||||
L20~100 | L101~200 | L201~400 | L401~600 | L601~800 | L20~100 | L101~200 | L201~400 | L401~600 | L601~800 | |||||
(Class 2, Fine) FWBP FWBSP | 5 | 20~250 | 5~100 | 0~100 | - | - | - | - | ||||||
6 | - | - | - | - | ||||||||||
8 | 20~600 | - | - | |||||||||||
10 | - | - | ||||||||||||
12 | 20~800 | |||||||||||||
16 | ||||||||||||||
20 | ||||||||||||||
EMx5 FMx5 When F=0, threads are not machined on the F dimension side. |