We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
FWB20-[20-800/1]-E[5-100/1]-F[5-100/1]
Description
Specified Threaded Rods - Fully Threaded similar DIN 6379
Stock availability:
On request
If you are inspecting MISUMI FWB20-[20-800/1]-E[5-100/1]-F[5-100/1], reach FAMAGA, the world's dominant provider of industrial equipment. Our company has progressed for more than ten years - these are cycles of experience, which are outlined in the quality of merchandises and particular attention to each buyer. We value everyone, who cooperated with us - hence, our regular purchasers accept the most acceptable purchase terms and discounts on the factory-made equipment market. Nowadays, there are more than 4000 such clients, and we constantly arrange new agreements. More than 650 purchases are terminated per day, because FAMAGA works all over the planet Germany, United Kingdom, Belize, Jamaica, Zimbabwe, Eritrea, El Salvador, Saudi Arabia, Slovenia, The Bahamas, Turkmenistan, Slovakia, Honduras, Uganda, Bangladesh, Oman, Moldova, Finland, Dominica, Niger, Mauritius, Benin, Nigeria, India, Estonia, Mauritania, Costa Rica, Fiji, Yemen, Belarus, Greece, Luxembourg, Djibouti, Vietnam, North Korea, South Sudan, Iran, Georgia, Ireland, Bulgaria, Swaziland, South Korea, Qatar, Albania, Cape Verde, Morocco. A well-built logistics network and a partnership network assist us to dispatch our products anywhere in the planet immediately without compromising product quality.
A particular source of honor for FAMAGA is its personnel, each of whom contributes to our work. We accept into our team only experts, who already have experience in the sphere of manufacturing equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been provided, and this number is amounting every day. We are glad that buyers choose FAMAGA again and again, and we are happy to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To inquire or order, call us by phone or write to the online chat on our site. You can also direct a list of the required equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Type | Material | Surface Treatment | ||||
Studs - Fully Threaded | Both Ends Right-Hand Screws | |||||
Thread gauge class 2 is used. | Class 3 | Thread gauge class 2 is used. | ||||
Coarse | Fine | Coarse | Coarse | Fine | ||
FAB | FABP | FABM | FWB | FWBP | EN 1.1191 Equiv. | Black Oxide |
FABN | - | - | FWBN | - | Electroless Nickel Plating | |
FABS | FABSP | FABMS | FWBS | FWBSP | EN 1.4301 Equiv. | - |
Part Number | - | L | - | E | - | F |
FAB6 FWBS6 | - - | 100 100 | - | E10 | - | F10 |
M | Thread Pitch | |
Coarse | Fine | |
3 | 0.5 | - |
4 | 0.7 | - |
5 | 0.8 | 0.5 |
6 | 1 | 0.75 |
8 | 1.25 | 1 |
10 | 1.5 | 1.25 |
12 | 1.75 | 1.25 |
16 | 2 | 1.5 |
20 | 2.5 | 1.5 |
Part Number | L 1mm Increment | Unit Price | ||||||||||||||
Type | M | FAB | FABN | FABS | ||||||||||||
L20~100 | L101~200 | L201~400 | L401~600 | L601~800 | L20~100 | L101~200 | L201~400 | L401~600 | L20~100 | L101~200 | L201~400 | L401~600 | L601~800 | |||
(Class 2, Coarse) FAB FABN FABS | 3 | 20~150 | - | - | - | - | - | - | - | - | - | - | ||||
4 | 20~150 | - | - | - | - | - | - | - | - | - | - | |||||
5 | 20~250 | - | - | - | - | - | - | - | - | |||||||
6 | - | - | - | - | - | - | - | - | ||||||||
8 | 20~600 | - | - | - | - | - | - | |||||||||
10 | - | - | - | - | - | - | ||||||||||
12 | 20~800 | |||||||||||||||
16 | ||||||||||||||||
20 |
Part Number | L 1mm Increment | Unit Price | ||||||||||||||||||
Type | M | FABM | FABMS | FABP | FABSP | |||||||||||||||
L20~100 | L101~200 | L201~400 | L401~600 | L601~800 | L20~100 | L101~200 | L201~400 | L401~600 | L601~800 | L20~100 | L101~200 | L201~400 | L401~600 | L20~100 | L101~200 | L201~400 | L401~600 | |||
(Class 3, Coarse) FABM FABMS (Class 2, Fine) FABP FABSP | 4 | 20~150 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||||
5 | 20~250 | - | - | - | - | - | - | |||||||||||||
6 | - | - | - | - | - | - | ||||||||||||||
8 | 20~600 (400) | - | - | - | - | |||||||||||||||
10 | - | - | - | - | ||||||||||||||||
12 | 20~800 | |||||||||||||||||||
16 | ||||||||||||||||||||
20 |
Part Number | 1mm Increment | Unit Price | |||||||||||||||||
Type | M | L | E | F | FWB | FWBN | FWBS | ||||||||||||
L20~100 | L101~200 | L201~400 | L401~600 | L601~800 | L20~100 | L101~200 | L201~400 | L401~600 | L601~800 | L20~100 | L101~200 | L201~400 | L401~600 | L601~800 | |||||
(Class 2, Coarse) FWB FWBN FWBS | 3 | 20~100 | 5~15 | 0~15 | - | - | - | - | - | - | - | - | - | - | - | - | |||
4 | 20~150 | 5~100 | 0~100 | - | - | - | - | - | - | - | - | - | |||||||
5 | 20~250 | - | - | - | - | - | - | ||||||||||||
6 | - | - | - | - | - | - | |||||||||||||
8 | 20~600 | - | - | - | |||||||||||||||
10 | - | - | - | ||||||||||||||||
12 | 20~800 | ||||||||||||||||||
16 | |||||||||||||||||||
20 | |||||||||||||||||||
24 | - | - | - | - | - | ||||||||||||||
30 | - | - | - | - | - | ||||||||||||||
EMx5 FMx5 When F=0, threads are not machined on the F dimension side. |
Part Number | 1mm Increment | Unit Price | ||||||||||||
Type | M | L | E | F | FWBP | FWBSP | ||||||||
L20~100 | L101~200 | L201~400 | L401~600 | L601~800 | L20~100 | L101~200 | L201~400 | L401~600 | L601~800 | |||||
(Class 2, Fine) FWBP FWBSP | 5 | 20~250 | 5~100 | 0~100 | - | - | - | - | ||||||
6 | - | - | - | - | ||||||||||
8 | 20~600 | - | - | |||||||||||
10 | - | - | ||||||||||||
12 | 20~800 | |||||||||||||
16 | ||||||||||||||
20 | ||||||||||||||
EMx5 FMx5 When F=0, threads are not machined on the F dimension side. |