We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SWSM-HN-D[21-60/1]-V[3-58/0.5]-T[1-10/0.1]
Description
Metal Washers/Thickness +-0.10 & +-0.01 mm/ID(H7) & OD(g6/h7) Selectable
Stock availability:
On request
If you are inspecting MISUMI SWSM-HN-D[21-60/1]-V[3-58/0.5]-T[1-10/0.1], communicate with FAMAGA, the world's dominant provider of mechanized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are expressed in the quality of outcomes and particular attention to each user. We esteem everyone, who collaborated with us - so, our regular consumers get the most attractive purchase forms and discounts on the manufacturing equipment market. Now, there are more than 4 thousand such clients, and we constantly make new agreements. More than 750 proceedings are resolved per day, because FAMAGA operates all over the planet Germany, United Kingdom, Belize, Myanmar, Philippines, Saudi Arabia, Samoa, Sri Lanka, Cuba, Angola, Denmark, Haiti, Slovenia, Guatemala, Romania, Belgium, Liechtenstein, The Bahamas, Antigua and Barbuda, Poland, Iceland, Benin, Costa Rica, Burkina Faso, Slovakia, Tajikistan, Uganda, Netherlands, Tanzania, Ukraine, Guyana, New Zealand, Indonesia, Madagascar, Senegal, Nepal, Swaziland, Austria, United States, Cyprus, Latvia, Georgia, Andorra, Kuwait, Eswatini, Switzerland, Central African Republic. A well-shaped logistics series and a partnership network help us to conduct our products anywhere in the globe as soon as possible without damaging product quality.
A particular source of honor for FAMAGA is its team members, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the range of manufacturing equipment.
All outputs from FAMAGA are ensured - we are responsible for the cause of our work. Now, more than 10 million units of products have been delivered, and this number is increasing every day. We are happy that purchasers choose FAMAGA again and again, and we are eager to make more progressive and technologically modern industrial equipment so as keep on top of it.
To request or place an order, get in touch with us or write a message to the online chat on our site. You can also send a list of the needful equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Part Number | Material | Surface Treatment | |
Standard Grade | Precision Grade | ||
SWSC | SWMC | EN 1.1191 Equiv. | - |
SWSB | SWMB | Black Oxide | |
SWSM | SWMM | Electroless Nickel Plating | |
SWSS | SWMS | EN 1.4301 Equiv. | - |
Part Number | - | Tolerance Selection | - | D | - | V | - | T | ||
D | V | |||||||||
SWSC | - | G | H | - | D10.0 | - | V4.0 | - | T1.0 |
Part Number | - | Tolerance Selection | - | D | - | V | - | T | ||
D | V | |||||||||
SWMC | - | G | H | - | D10.0 | - | V4.0 | - | T1.0 |
D | D Tolerance Selection | |||
G | H | N | X | |
g6 | h7 | - | - | |
5.0~8.5 | - | - | -0.1 -0.3 | 0 -0.2 |
9.0~10.0 | -0.005 | 0 | ||
-0.014 | -0.015 | |||
10.5~18.0 | -0.006 | 0 | ||
-0.017 | -0.018 | |||
18.5~30 | -0.007 | 0 | ||
-0.020 | -0.021 | |||
31~50 | -0.009 | 0 | ||
-0.025 | -0.025 | |||
51~60 | -0.010 | 0 | ||
-0.029 | -0.030 |
V | V Tolerance Selection | ||
H | N | X | |
H7 | - | - | |
3.0 | +0.010 | +0.3 +0.1 | +0.2 0 |
0 | |||
3.5~6.0 | +0.012 | ||
0 | |||
6.5~10.0 | +0.015 | ||
0 | |||
10.5~18.0 | +0.018 | ||
0 | |||
18.5~30.0 | +0.021 | ||
0 | |||
30.5~50.0 | +0.025 | ||
0 | |||
50.5~58.0 | +0.030 | ||
0 |
D (O.D.) | V (I.D.) | Price No. |
G | H | |
N | ||
X | ||
H | H | |
N | ||
X | ||
N | H | |
N | ||
X | ||
X | H | |
N | ||
X |
Part Number | D Tolerance Selection | V Tolerance Selection | D | V 0.5mm Increment | T 0.1mm Increment | Unit Price | |||||||||||
SWSC | SWSB | SWSM | SWSS | ||||||||||||||
Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | ||||||
SWSC SWSB SWSM SWSS | G H N X | H N X | 5.0~10.0 0.5mm Increment | 3.0~58.0 (VD-2) Refer to the following. | 1.0~ 2.9 | - | - | - | |||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
10.5~20.0 0.5mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
21~30 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
31~40 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
41~50 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
51~60 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
T3 for SWSS No specification available for sizes without declaration of value. | D9 is applicable when G or H is selected as the tolerance values of D and V. The dimension ranges
of V and T are shown in the table below.
|
Part Number | D Tolerance Selection | V Tolerance Selection | D | V 0.5mm Increment | T 0.1mm Increment | Unit Price | |||||||||||
SWMC | SWMB | SWMM | SWMS | ||||||||||||||
Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | ||||||
SWMC SWMB SWMM SWMS | G H N X | H N X | 5.0~10.0 0.5mm Increment | 3.0~58.0 (VD-2) Refer to the following. | 1.0~ 2.9 | - | - | - | |||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
10.5~20.0 0.5mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
21~30 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
31~40 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
41~50 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
51~60 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
T3 for SWMS No specification available for sizes without declaration of value. | D9 is applicable when G or H is selected as the tolerance values of D and V. The dimension ranges of V and T are shown in the table below.
|