We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SWMS-NN-D[21-60/1]-V[3-58/0.5]-T[3.1-10/0.1]
Description
Metal Washers/Thickness +-0.10 & +-0.01 mm/ID(H7) & OD(g6/h7) Selectable
Stock availability:
On request
If you are pursuing MISUMI SWMS-NN-D[21-60/1]-V[3-58/0.5]-T[3.1-10/0.1], call FAMAGA, the world's primary vendor of manufacturing equipment. Our company has operated for more than ten years - these are cycles of experience, which are illustrated in the quality of products and special attention to each orderer. We cherish everyone, who collaborated with us - thus, our regular clients procure the most helpful purchase forms and discounts on the machine made streamlined equipment market. At present, there are more than 3500 such clients, and we constantly form new agreements. More than 750 affairs are settled per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Syria, South Africa, Poland, Sierra Leone, Brunei, Ecuador, Croatia, Sudan, Myanmar, Philippines, Grenada, Suriname, Malawi, Mozambique, Netherlands, Costa Rica, Seychelles, Kiribati, Ukraine, Niger, Gambia, Montenegro, Senegal, Liechtenstein, Argentina, Burundi, Australia, Guatemala, Comoros, Czech Republic, Slovakia, Iceland, Angola, Israel, Algeria, North Korea, Antigua and Barbuda, Ghana, Malta, Andorra, Iran. A well-developed logistics connection and a partnership network assist us to send our units anywhere in the planet immediately without compromising product quality.
A specific source of good name for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the direction of manufacturing equipment.
All outcomes from FAMAGA are verified - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been provided, and this number is ascending every day. We are glad that customers choose FAMAGA again and again, and we are happy to make more progressive and technologically modern industrial equipment so as stay in control.
To request or book, phone us or write to the online chat on our official website. You can also direct a list of the desirable equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Part Number | Material | Surface Treatment | |
Standard Grade | Precision Grade | ||
SWSC | SWMC | EN 1.1191 Equiv. | - |
SWSB | SWMB | Black Oxide | |
SWSM | SWMM | Electroless Nickel Plating | |
SWSS | SWMS | EN 1.4301 Equiv. | - |
Part Number | - | Tolerance Selection | - | D | - | V | - | T | ||
D | V | |||||||||
SWSC | - | G | H | - | D10.0 | - | V4.0 | - | T1.0 |
Part Number | - | Tolerance Selection | - | D | - | V | - | T | ||
D | V | |||||||||
SWMC | - | G | H | - | D10.0 | - | V4.0 | - | T1.0 |
D | D Tolerance Selection | |||
G | H | N | X | |
g6 | h7 | - | - | |
5.0~8.5 | - | - | -0.1 -0.3 | 0 -0.2 |
9.0~10.0 | -0.005 | 0 | ||
-0.014 | -0.015 | |||
10.5~18.0 | -0.006 | 0 | ||
-0.017 | -0.018 | |||
18.5~30 | -0.007 | 0 | ||
-0.020 | -0.021 | |||
31~50 | -0.009 | 0 | ||
-0.025 | -0.025 | |||
51~60 | -0.010 | 0 | ||
-0.029 | -0.030 |
V | V Tolerance Selection | ||
H | N | X | |
H7 | - | - | |
3.0 | +0.010 | +0.3 +0.1 | +0.2 0 |
0 | |||
3.5~6.0 | +0.012 | ||
0 | |||
6.5~10.0 | +0.015 | ||
0 | |||
10.5~18.0 | +0.018 | ||
0 | |||
18.5~30.0 | +0.021 | ||
0 | |||
30.5~50.0 | +0.025 | ||
0 | |||
50.5~58.0 | +0.030 | ||
0 |
D (O.D.) | V (I.D.) | Price No. |
G | H | |
N | ||
X | ||
H | H | |
N | ||
X | ||
N | H | |
N | ||
X | ||
X | H | |
N | ||
X |
Part Number | D Tolerance Selection | V Tolerance Selection | D | V 0.5mm Increment | T 0.1mm Increment | Unit Price | |||||||||||
SWSC | SWSB | SWSM | SWSS | ||||||||||||||
Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | ||||||
SWSC SWSB SWSM SWSS | G H N X | H N X | 5.0~10.0 0.5mm Increment | 3.0~58.0 (VD-2) Refer to the following. | 1.0~ 2.9 | - | - | - | |||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
10.5~20.0 0.5mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
21~30 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
31~40 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
41~50 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
51~60 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
T3 for SWSS No specification available for sizes without declaration of value. | D9 is applicable when G or H is selected as the tolerance values of D and V. The dimension ranges
of V and T are shown in the table below.
|
Part Number | D Tolerance Selection | V Tolerance Selection | D | V 0.5mm Increment | T 0.1mm Increment | Unit Price | |||||||||||
SWMC | SWMB | SWMM | SWMS | ||||||||||||||
Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | ||||||
SWMC SWMB SWMM SWMS | G H N X | H N X | 5.0~10.0 0.5mm Increment | 3.0~58.0 (VD-2) Refer to the following. | 1.0~ 2.9 | - | - | - | |||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
10.5~20.0 0.5mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
21~30 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
31~40 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
41~50 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
51~60 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
T3 for SWMS No specification available for sizes without declaration of value. | D9 is applicable when G or H is selected as the tolerance values of D and V. The dimension ranges of V and T are shown in the table below.
|