We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SWMM-HX-D[9-20/0.5]-V[3-58/0.5]-T[1-10/0.1]
Description
Metal Washers/Thickness +-0.10 & +-0.01 mm/ID(H7) & OD(g6/h7) Selectable
Stock availability:
On request
If you are seeking MISUMI SWMM-HX-D[9-20/0.5]-V[3-58/0.5]-T[1-10/0.1], communicate with FAMAGA, the world's central company of streamlined equipment. Our company has lasted for more than ten years - these are years of experience, which are expressed in the quality of outcomes and private attention to each consumer. We esteem everyone, who engaged with us - so, our regular buyers pick up the most attractive purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such purchasers, and we constantly sign new agreements. More than 750 transactions are made per day, because FAMAGA operates all over the planet Germany, United Kingdom, Colombia, Bangladesh, Sri Lanka, China, Lithuania, Zambia, Papua New Guinea, Malaysia, Qatar, Sudan, Denmark, Equatorial Guinea, Burkina Faso, Mauritania, Nepal, Vietnam, Netherlands, The Bahamas, Togo, Yemen, Estonia, El Salvador, Iran, Algeria, Mauritius, Morocco, Seychelles, Nigeria, Dominica, Ukraine, Samoa, Serbia, Angola, Finland, Botswana, Andorra. A well-built logistics bond and a partnership network cheer us to ship our goods anywhere in the globe on-time without disreputing product quality.
A special source of pride for FAMAGA is its staff members, each of whom contributes to common cause. We call into our team only professionals, who already have experience in the direction of industrial equipment.
All products from FAMAGA are verified - we are responsible for the outcome of our work. Now, more than 10 million units of products have been delivered, and this amount is growing every day. We are pleased that buyers choose FAMAGA again and again, and we are eager to make more advanced and technologically developed industrial equipment so as stay in control.
To inquire or order, call us by phone or write to the online chat on our site. You can also forward a list of the needful equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Part Number | Material | Surface Treatment | |
Standard Grade | Precision Grade | ||
SWSC | SWMC | EN 1.1191 Equiv. | - |
SWSB | SWMB | Black Oxide | |
SWSM | SWMM | Electroless Nickel Plating | |
SWSS | SWMS | EN 1.4301 Equiv. | - |
Part Number | - | Tolerance Selection | - | D | - | V | - | T | ||
D | V | |||||||||
SWSC | - | G | H | - | D10.0 | - | V4.0 | - | T1.0 |
Part Number | - | Tolerance Selection | - | D | - | V | - | T | ||
D | V | |||||||||
SWMC | - | G | H | - | D10.0 | - | V4.0 | - | T1.0 |
D | D Tolerance Selection | |||
G | H | N | X | |
g6 | h7 | - | - | |
5.0~8.5 | - | - | -0.1 -0.3 | 0 -0.2 |
9.0~10.0 | -0.005 | 0 | ||
-0.014 | -0.015 | |||
10.5~18.0 | -0.006 | 0 | ||
-0.017 | -0.018 | |||
18.5~30 | -0.007 | 0 | ||
-0.020 | -0.021 | |||
31~50 | -0.009 | 0 | ||
-0.025 | -0.025 | |||
51~60 | -0.010 | 0 | ||
-0.029 | -0.030 |
V | V Tolerance Selection | ||
H | N | X | |
H7 | - | - | |
3.0 | +0.010 | +0.3 +0.1 | +0.2 0 |
0 | |||
3.5~6.0 | +0.012 | ||
0 | |||
6.5~10.0 | +0.015 | ||
0 | |||
10.5~18.0 | +0.018 | ||
0 | |||
18.5~30.0 | +0.021 | ||
0 | |||
30.5~50.0 | +0.025 | ||
0 | |||
50.5~58.0 | +0.030 | ||
0 |
D (O.D.) | V (I.D.) | Price No. |
G | H | |
N | ||
X | ||
H | H | |
N | ||
X | ||
N | H | |
N | ||
X | ||
X | H | |
N | ||
X |
Part Number | D Tolerance Selection | V Tolerance Selection | D | V 0.5mm Increment | T 0.1mm Increment | Unit Price | |||||||||||
SWSC | SWSB | SWSM | SWSS | ||||||||||||||
Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | ||||||
SWSC SWSB SWSM SWSS | G H N X | H N X | 5.0~10.0 0.5mm Increment | 3.0~58.0 (VD-2) Refer to the following. | 1.0~ 2.9 | - | - | - | |||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
10.5~20.0 0.5mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
21~30 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
31~40 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
41~50 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
51~60 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
T3 for SWSS No specification available for sizes without declaration of value. | D9 is applicable when G or H is selected as the tolerance values of D and V. The dimension ranges
of V and T are shown in the table below.
|
Part Number | D Tolerance Selection | V Tolerance Selection | D | V 0.5mm Increment | T 0.1mm Increment | Unit Price | |||||||||||
SWMC | SWMB | SWMM | SWMS | ||||||||||||||
Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | ||||||
SWMC SWMB SWMM SWMS | G H N X | H N X | 5.0~10.0 0.5mm Increment | 3.0~58.0 (VD-2) Refer to the following. | 1.0~ 2.9 | - | - | - | |||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
10.5~20.0 0.5mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
21~30 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
31~40 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
41~50 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
51~60 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
T3 for SWMS No specification available for sizes without declaration of value. | D9 is applicable when G or H is selected as the tolerance values of D and V. The dimension ranges of V and T are shown in the table below.
|