We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SWMC-XX-D[5-20/0.5]-V[3-58/0.5]-T[1-10/0.1]
Description
Metal Washers/Thickness +-0.10 & +-0.01 mm/ID(H7) & OD(g6/h7) Selectable
Stock availability:
On request
If you are inspecting MISUMI SWMC-XX-D[5-20/0.5]-V[3-58/0.5]-T[1-10/0.1], communicate with FAMAGA, the world's primary vendor of manufacturing equipment. Our company has operated for more than ten years - these are years of experience, which are expressed in the quality of outcomes and particular attention to each orderer. We esteem everyone, who joined with us - so, our regular consumers procure the most attractive purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such clients, and we constantly make new agreements. More than 750 transactions are made per day, because FAMAGA operates all over the planet Germany, United Kingdom, Eritrea, Bosnia and Herzegovina, Albania, Brazil, France, Moldova, Singapore, Slovenia, Switzerland, Bolivia, Colombia, Honduras, Macedonia, Romania, Mexico, Seychelles, East Timor, Cape Verde, Chad, El Salvador, Serbia, Sweden, Samoa, Croatia, Uzbekistan, Bangladesh, Fiji, Russia, South Sudan, Mauritius, Indonesia, Greece, Zimbabwe, Iceland, Guatemala, Botswana, Malaysia, Ireland, Mauritania, Ukraine. A well-shaped logistics network and a partnership network cheer us to conduct our goods anywhere in the globe on-time without damaging product quality.
A special source of honor for FAMAGA is its team members, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the direction of industrial equipment.
All outputs from FAMAGA are affirmed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been delivered, and this amount is rising every day. We are pleased that buyers choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To ask a question or order, call us by phone or write to the online chat on our official website. You can also forward a list of the needful equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Part Number | Material | Surface Treatment | |
Standard Grade | Precision Grade | ||
SWSC | SWMC | EN 1.1191 Equiv. | - |
SWSB | SWMB | Black Oxide | |
SWSM | SWMM | Electroless Nickel Plating | |
SWSS | SWMS | EN 1.4301 Equiv. | - |
Part Number | - | Tolerance Selection | - | D | - | V | - | T | ||
D | V | |||||||||
SWSC | - | G | H | - | D10.0 | - | V4.0 | - | T1.0 |
Part Number | - | Tolerance Selection | - | D | - | V | - | T | ||
D | V | |||||||||
SWMC | - | G | H | - | D10.0 | - | V4.0 | - | T1.0 |
D | D Tolerance Selection | |||
G | H | N | X | |
g6 | h7 | - | - | |
5.0~8.5 | - | - | -0.1 -0.3 | 0 -0.2 |
9.0~10.0 | -0.005 | 0 | ||
-0.014 | -0.015 | |||
10.5~18.0 | -0.006 | 0 | ||
-0.017 | -0.018 | |||
18.5~30 | -0.007 | 0 | ||
-0.020 | -0.021 | |||
31~50 | -0.009 | 0 | ||
-0.025 | -0.025 | |||
51~60 | -0.010 | 0 | ||
-0.029 | -0.030 |
V | V Tolerance Selection | ||
H | N | X | |
H7 | - | - | |
3.0 | +0.010 | +0.3 +0.1 | +0.2 0 |
0 | |||
3.5~6.0 | +0.012 | ||
0 | |||
6.5~10.0 | +0.015 | ||
0 | |||
10.5~18.0 | +0.018 | ||
0 | |||
18.5~30.0 | +0.021 | ||
0 | |||
30.5~50.0 | +0.025 | ||
0 | |||
50.5~58.0 | +0.030 | ||
0 |
D (O.D.) | V (I.D.) | Price No. |
G | H | |
N | ||
X | ||
H | H | |
N | ||
X | ||
N | H | |
N | ||
X | ||
X | H | |
N | ||
X |
Part Number | D Tolerance Selection | V Tolerance Selection | D | V 0.5mm Increment | T 0.1mm Increment | Unit Price | |||||||||||
SWSC | SWSB | SWSM | SWSS | ||||||||||||||
Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | ||||||
SWSC SWSB SWSM SWSS | G H N X | H N X | 5.0~10.0 0.5mm Increment | 3.0~58.0 (VD-2) Refer to the following. | 1.0~ 2.9 | - | - | - | |||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
10.5~20.0 0.5mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
21~30 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
31~40 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
41~50 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
51~60 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
T3 for SWSS No specification available for sizes without declaration of value. | D9 is applicable when G or H is selected as the tolerance values of D and V. The dimension ranges
of V and T are shown in the table below.
|
Part Number | D Tolerance Selection | V Tolerance Selection | D | V 0.5mm Increment | T 0.1mm Increment | Unit Price | |||||||||||
SWMC | SWMB | SWMM | SWMS | ||||||||||||||
Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | Tolerance | ||||||
SWMC SWMB SWMM SWMS | G H N X | H N X | 5.0~10.0 0.5mm Increment | 3.0~58.0 (VD-2) Refer to the following. | 1.0~ 2.9 | - | - | - | |||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
10.5~20.0 0.5mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
21~30 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
31~40 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
41~50 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
51~60 1mm Increment | 1.0~ 2.9 | - | - | - | |||||||||||||
3.0~ 5.0 | |||||||||||||||||
5.1~10.0 | |||||||||||||||||
T3 for SWMS No specification available for sizes without declaration of value. | D9 is applicable when G or H is selected as the tolerance values of D and V. The dimension ranges of V and T are shown in the table below.
|