We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
FWSSSR-D[21-100/1]-WVE[13.1-90/0.1]-T[1-10/0.1]
Description
Metal Washers/Thickness +-0.10 & +-0.01 mm/Dimensions Configurable similar DIN 988
Stock availability:
On request
If you are inspecting MISUMI FWSSSR-D[21-100/1]-WVE[13.1-90/0.1]-T[1-10/0.1], reach FAMAGA, the world's central company of streamlined equipment. Our company has lasted for more than ten years - these are ages of experience, which are depicted in the quality of items and particular attention to each consumer. We value everyone, who engaged with us - so, our regular consumers pick up the most beneficial purchase terms and discounts on the manufacturing equipment market. At present, there are more than 4 thousand such clients, and we constantly make new agreements. More than 750 affairs are settled per day, because FAMAGA works all over the planet Germany, United Kingdom, Oman, Iraq, Georgia, Kuwait, East Timor, Switzerland, Egypt, Brazil, Cyprus, Armenia, Romania, Nicaragua, Belarus, Colombia, Indonesia, Albania, China, Czech Republic, Malaysia, Fiji, Singapore, Belize, Malta, South Sudan, Japan, Mozambique, Finland, Estonia, Mongolia, Ireland, Latvia, Haiti, Panama, Montenegro, Antigua and Barbuda, Croatia, The Gambia, Suriname, Benin, Dominica, Jamaica, Tajikistan, Seychelles, Costa Rica, Bangladesh. A well-built logistics network and a partnership network allow us to dispatch our elements anywhere in the planet with no delay without disreputing product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only experts, who already have experience in the sphere of industrial equipment.
All items from FAMAGA are verified - we are responsible for the result of our work. At this moment, more than 10 million units of products have been shipped, and this amount is amounting every day. We are proud that buyers choose FAMAGA again and again, and we strive to make more developed and technologically innovative industrial equipment so as not to lower the bar.
To inquire or order, call us by phone or write a message to the online chat on our official website. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Part Number | Material | Surface Treatment | |
Standard Grade | Precision Grade | ||
FWS | FWAS | EN 1.0038 Equiv. | - |
FWSSC | FWASC | EN 1.1191 Equiv. | - |
FWSSB | FWASB | Black Oxide | |
FWSSM | FWASM | Electroless Nickel Plating | |
FWSSR | FWASR | LTBC Plating | |
FWSSA | FWASA | Aluminum Alloy 2000 series | Clear Anodize |
FWSSAB | - | Black Anodize | |
FWSBB | - | Brass (JIS EN CW614N Equiv.) | - |
FWSSS | FWASS | EN 1.4301 Equiv. | - |
FWSSSR | FWASSR | LTBC Plating | |
FWSUS | FWASU | EN 1.4401 Equiv. | - |
Part Number | - | D | - | V | - | T |
FWSSC | - | D71 | - | V50.0 | - | T10.0 |
Part Number | - | D | - | V | - | T |
FWASB | - | D15.5 | - | V5.5 | - | T2.6 |
Part Number | D | V 0.5mm Increment (V3 or More) | T 0.1mm Increment | Unit Price | ||||||||||
FWS | FWSSC | FWSSB | FWSSM | FWSSR | FWSSA | FWSSAB | FWSBB | FWSSS | FWSSSR | FWSUS | ||||
FWS FWSSC FWSSB FWSSM FWSSR FWSSA FWSSAB FWSBB FWSSS FWSSSR FWSUS | 4.0~10.0 0.5mm Increment | 0 (No Hole Machining) (Selection) 2.0 2.6 (0.5mm Increment) 3.0 ~ 90.0 | 1.0~ 2.0 | |||||||||||
2.1~ 5.0 | ||||||||||||||
5.1~ 10.0 | ||||||||||||||
10.5~20.0 0.5mm Increment | 1.0~ 2.0 | |||||||||||||
2.1~ 5.0 | ||||||||||||||
5.1~ 10.0 | ||||||||||||||
21~30 1mm Increment | 1.0~ 2.0 | |||||||||||||
2.1~ 5.0 | ||||||||||||||
5.1~ 10.0 | ||||||||||||||
31~40 1mm Increment | 1.0~ 2.0 | - | ||||||||||||
2.1~ 5.0 | - | |||||||||||||
5.1~ 10.0 | - | |||||||||||||
41~50 1mm Increment | 1.0~ 2.0 | - | ||||||||||||
2.1~ 5.0 | - | |||||||||||||
5.1~ 10.0 | - | |||||||||||||
51~60 1mm Increment | 1.0~ 2.0 | - | ||||||||||||
2.1~ 5.0 | - | |||||||||||||
5.1~ 10.0 | - | |||||||||||||
61~80 1mm Increment | 5.0~ 10.0 | - | ||||||||||||
81~100 1mm Increment | 5.0~ 10.0 | - | ||||||||||||
Material: EN AW-2017 Equiv., EN 1.4401 Equiv., Brass T≥2 No specification available for sizes without declaration of value. | D / V Machining Conditions D≤60 V≤D-2 D≥61 V≤D-4 | D / V Machining Conditions of Material EN AW-2017 Equiv. 4≤D≤ 10 V≤D- 2 10.5≤D≤ 30 V≤D- 4 31≤D≤ 60 V≤D- 6 61≤D≤ 80 V≤D- 8 81≤D≤ 100 V≤D- 10 |
Part Number | D | V 0.5mm Increment (V3 or More) | T 0.1mm Increment | Unit Price | ||||||||
FWAS | FWASC | FWASB | FWASM | FWASR | FWASA | FWASS | FWASSR | FWASU | ||||
FWAS FWASC FWASB FWASM FWASR FWASA FWASS FWASSR FWASU | 4.0~10.0 0.5mm Increment | 0 (No Hole Machining) (Selection) 2.0 2.6 (0.5mm Increment) 3.0 ~ 90.0 | 1.0~ 2.0 | |||||||||
2.1~ 5.0 | ||||||||||||
5.1~ 10.0 | ||||||||||||
10.5~20.0 0.5mm Increment | 1.0~ 2.0 | |||||||||||
2.1~ 5.0 | ||||||||||||
5.1~ 10.0 | ||||||||||||
21~30 1mm Increment | 1.0~ 2.0 | |||||||||||
2.1~ 5.0 | ||||||||||||
5.1~ 10.0 | ||||||||||||
31~40 1mm Increment | 1.0~ 2.0 | - | ||||||||||
2.1~ 5.0 | - | |||||||||||
5.1~ 10.0 | - | |||||||||||
41~50 1mm Increment | 1.0~ 2.0 | - | ||||||||||
2.1~ 5.0 | - | |||||||||||
5.1~ 10.0 | - | |||||||||||
51~60 1mm Increment | 1.0~ 2.0 | - | ||||||||||
2.1~ 5.0 | - | |||||||||||
5.1~ 10.0 | - | |||||||||||
61~80 1mm Increment | 5.0~ 10.0 | - | - | - | - | |||||||
81~100 1mm Increment | 5.0~ 10.0 | - | - | - | - | |||||||
Material: EN AW-2017 Equiv., EN 1.4401 Equiv. T≥2 No specification available for sizes without declaration of value. | D / V Machining Conditions D≤60 V≤D-2 D≥61 V≤D-4 | D / V Machining Conditions of Material EN AW-2017 Equiv. 4≤D≤ 10 V≤D- 2 10.5≤D≤ 30 V≤D- 4 31≤D≤ 60 V≤D- 6 61≤D≤ 80 V≤D- 8 81≤D≤ 100 V≤D- 10 |