We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
FTCMSH-V[3-55/0.5]-D[4-20/0.5]-H[6-30/0.5]-T[1-20/0.5]-L[10-100/0.1]
Description
Collars/Flanged/Length -0.30 & +-0.01 mm/ID&OD Selectable
Stock availability:
On request
If you are looking for MISUMI FTCMSH-V[3-55/0.5]-D[4-20/0.5]-H[6-30/0.5]-T[1-20/0.5]-L[10-100/0.1], call FAMAGA, the world's chief distributor of factory-made equipment. Our company has existed for more than ten years - these are ages of experience, which are illustrated in the quality of products and personalseparate attention to each client. We cherish everyone, who conspired with us - hence, our regular buyers procure the most acceptable purchase terms and discounts on the factory-made equipment market. At present, there are more than 4500 such buyers, and we constantly compose new agreements. More than 600 affairs are settled per day, because FAMAGA operates all over the earth Germany, United Kingdom, Barbados, Guatemala, Poland, Lebanon, Palestine, Kyrgyzstan, North Korea, Peru, Liechtenstein, Cape Verde, Azerbaijan, Panama, Myanmar, Malawi, Iraq, Kazakhstan, Sudan, Comoros, Eswatini, Uzbekistan, Malaysia, Czech Republic, Togo, Andorra, Paraguay, Malta, Uruguay, Libya, Seychelles, Thailand, Guyana, Norway, Australia, Antigua and Barbuda, Benin, Moldova, India, Equatorial Guinea, Laos, Israel, Vietnam, Slovakia, Niger. A advanced logistics series and a partnership network help us to conduct our items anywhere in the globe immediately without undermining product quality.
A special source of good name for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the range of manufacturing equipment.
All items from FAMAGA are ensured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been provided, and this number is ascending every day. We are glad that consumers choose FAMAGA again and again, and we are glad to make more progressive and technologically advanced industrial equipment so as not to lower the bar.
To inquire or order, contact us or write a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Type | Material | Surface Treatment | Hardness | ||
Standard | Configurable | ||||
Standard Grade | Precision Grade | ||||
- | FTCLS | - | EN 1.0038 Equiv. | - | - |
- | FTCLC | FTCLMC | EN 1.1191 Equiv. | - | - |
TCLB | FTCLB | FTCLMB | Black Oxide | ||
TCLM | FTCLM | FTCLMM | Electroless Nickel Plating | ||
- | FTCLBB | - | Brass (JIS EN CW614N Equiv.) | - | - |
TCLA | FTCLA | - | Aluminum Alloy 2000 series | Clear Anodize | - |
- | FTCLAB | Black Anodize | |||
TCLSS | FTCLSS | - | EN 1.4301 Equiv. | - | - |
- | FTCLCH | - | EN 1.1191 Equiv. | - | 45~50HRC |
FTCLBH | Black Oxide | ||||
FTCLMH | Electroless Nickel Plating | ||||
- | FTCLSK | - | EN 1.2510 Equiv. | - | 55HRC~ |
- | FTCLSH | FTCMSH | EN 1.4031 Equiv. | - | 45~50HRC |
Part Number | - | D | - | L |
TCLB10 | - | 20 | - | 60.0 |
Part Number | - | V | - | D | - | H | - | T | - | L |
FTCLB | - | V10.5 | - | D20 | - | H30 | - | T4 | - | L23.8 |
Part Number | - | V | - | D | - | H | - | T | - | L |
FTCLMB | - | V10.5 | - | D20 | - | H30 | - | T4 | - | L23.8 |
Part Number | D Selection | L 0.1mm Increment | ||||||||||||||||
Type | V | |||||||||||||||||
TCLB TCLM TCLA TCLSS | 2 | 5 | 6 | 8 | 10 | 10.0~16.0 | ||||||||||||
3 | 5 | 6 | 8 | 10 | 12 | 10.0~50.0 | ||||||||||||
4 | 6 | 8 | 10 | 12 | 13 | 14 | 15 | 16 | 20 | |||||||||
5 | 8 | 10 | 12 | 13 | 14 | 15 | 16 | 20 | ||||||||||
6 | 8 | 10 | 12 | 13 | 14 | 15 | 16 | 20 | 25 | |||||||||
8 | 10 | 12 | 13 | 14 | 15 | 16 | 20 | 25 | 30 | 10.0~100.0 | ||||||||
10 | 12 | 13 | 14 | 15 | 16 | 20 | 25 | 30 | 35 | 40 | 50 | |||||||
12 | 15 | 16 | 20 | 25 | 30 | 35 | 40 | 50 | ||||||||||
15 | 20 | 25 | 30 | 35 | 40 | 50 | 60 | |||||||||||
16 | 20 | 25 | 30 | 35 | 40 | 50 | 60 | |||||||||||
20 | 25 | 30 | 35 | 40 | 50 | 60 | ||||||||||||
25 | 30 | 35 | 40 | 50 | 60 | |||||||||||||
30 | 40 | 50 | 60 |
Part Number | Unit Price | ||||
Type | V | L10.0~25.0 | 25.1~50.0 | 50.1~75.0 | 75.1~100.0 |
TCLB | 2 | - | - | - | |
3 4 5 | - | - | |||
6 | - | - | |||
8 10 | |||||
12 | |||||
15 | |||||
16 | |||||
20 | |||||
25 | |||||
30 | |||||
TCLM | 2 | - | - | - | |
3 4 5 | - | - | |||
6 | - | - | |||
8 10 | |||||
12 | |||||
15 | |||||
16 | |||||
20 | |||||
25 | |||||
30 |
Part Number | Unit Price | ||||
Type | V | L10.0~25.0 | 25.1~50.0 | 50.1~75.0 | 75.1~100.0 |
TCLA | 2 | - | - | - | |
3 4 5 | - | - | |||
6 | - | - | |||
8 10 | |||||
12 | |||||
15 | |||||
16 | |||||
20 | |||||
25 | |||||
30 | |||||
TCLSS | 2 | - | - | - | |
3 4 5 | - | - | |||
6 | - | - | |||
8 10 | |||||
12 | |||||
15 | |||||
16 | |||||
20 | |||||
25 | |||||
30 |
Part Number | V 0.5mm Increment (V3 or More) | D | H | T 1mm Increment | L 0.1mm Increment | Unit Price | ||||||||||
FTCLS | FTCLC | FTCLB | FTCLM FTCLBB | FTCLA | FTCLAB FTCLSS | FTCLCH | FTCLBH | FTCLMH | FTCLSK | FTCLSH | ||||||
FTCLS FTCLC FTCLB FTCLM FTCLBB FTCLA FTCLAB FTCLSS FTCLCH FTCLBH FTCLMH FTCLSK FTCLSH | (Selection) 2.0 2.6 (0.5mm Increment) 3.0~55.0 | 4.0~10.0 (0.5mm Increment) | 6.0~20.0 (0.5mm Increment) | 1~20 (T≤L-1) FTCLBB (2≤T≤L-2) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||||||
50.1~ 75.0 | ||||||||||||||||
75.1~ 100.0 | ||||||||||||||||
10.5~20 (0.5mm Increment) | 12.5~30 (0.5mm Increment) | 10.0~ 25.0 | ||||||||||||||
25.1~ 50.0 | ||||||||||||||||
50.1~ 75.0 | ||||||||||||||||
75.1~ 100.0 | ||||||||||||||||
21~30 (1mm Increment) | 23~40 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||
25.1~ 50.0 | ||||||||||||||||
50.1~ 75.0 | ||||||||||||||||
75.1~ 100.0 | ||||||||||||||||
31~40 (1mm Increment) | 33~50 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||
25.1~ 50.0 | ||||||||||||||||
50.1~ 75.0 | ||||||||||||||||
75.1~ 100.0 | ||||||||||||||||
41~50 (1mm Increment) | 43~60 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||
25.1~ 50.0 | ||||||||||||||||
50.1~ 75.0 | ||||||||||||||||
75.1~ 100.0 | ||||||||||||||||
51~60 (1mm Increment) | 53~70 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||
25.1~ 50.0 | ||||||||||||||||
50.1~ 75.0 | ||||||||||||||||
75.1~ 100.0 | ||||||||||||||||
D−V Machining Conditions 10.0≤L≤50.0 (D-V)/2≥1 50.1≤L≤100.0 (D-V)/2≥3 | D−V Machining Conditions (FTCLSK, FTCLBB) 4≤D≤10 V≤D-2 10.5≤D≤30 V≤D-4 31≤D≤60 V≤D-6 | H-D≥2 D/10≤L≤Vx8 |
Part Number | V 0.5mm Increment (V3 or More) | D | H | T 0.5mm Increment | L 0.1mm Increment | Unit Price | |||
FTCLMC | FTCLMB | FTCLMM | FTCMSH | ||||||
FTCLMC FTCLMB FTCLMM FTCMSH | (Selection) 2.0 2.6 (0.5mm Increment) 3.0~55.0 | 4.0~10.0 (0.5mm Increment) | 6.0~20.0 (0.5mm Increment) | 1.0~20.0 | 10.0~ 25.0 | ||||
25.1~ 50.0 | |||||||||
50.1~ 75.0 | |||||||||
75.1~100.0 | |||||||||
10.5~20 (0.5mm Increment) | 12.5~30 (0.5mm Increment) | 2.0~20.0 | 10.0~ 25.0 | ||||||
25.1~ 50.0 | |||||||||
50.1~ 75.0 | |||||||||
75.1~100.0 | |||||||||
21~30 (1mm Increment) | 23~40 (1mm Increment) | 3.0~20.0 | 10.0~ 25.0 | ||||||
25.1~ 50.0 | |||||||||
50.1~ 75.0 | |||||||||
75.1~100.0 | |||||||||
31~40 (1mm Increment) | 33~50 (1mm Increment) | 10.0~ 25.0 | |||||||
25.1~ 50.0 | |||||||||
50.1~ 75.0 | |||||||||
75.1~100.0 | |||||||||
41~50 (1mm Increment) | 43~60 (1mm Increment) | 10.0~ 25.0 | |||||||
25.1~ 50.0 | |||||||||
50.1~ 75.0 | |||||||||
75.1~100.0 | |||||||||
51~60 (1mm Increment) | 53~70 (1mm Increment) | 10.0~ 25.0 | |||||||
25.1~ 50.0 | |||||||||
50.1~ 75.0 | |||||||||
75.1~100.0 | |||||||||
D−V Machining Conditions 4≤D≤10 V≤D-2 10.5≤D≤30 V≤D-4 31≤D≤60 V≤D-6 | H-D≥2 | T≤L-1 | D/10≤L≤Vx8 |