We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
FTCMSH-V[3-55/0.5]-D[21-60/1]-H[31-70/1]-T[1-20/0.5]-L[10-100/0.1]
Description
Collars/Flanged/Length -0.30 & +-0.01 mm/ID&OD Selectable
Stock availability:
On request
If you are questing MISUMI FTCMSH-V[3-55/0.5]-D[21-60/1]-H[31-70/1]-T[1-20/0.5]-L[10-100/0.1], reach FAMAGA, the world's principle retailer of machine made equipment. Our company has worked for more than ten years - these are ages of experience, which are depicted in the quality of items and individual attention to each buyer. We value everyone, who liased with us - so, our regular customers accept the most beneficial purchase terms and discounts on the manufacturing equipment market. At present, there are more than 4 thousand such customers, and we constantly arrange new agreements. More than 750 affairs are settled per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Bahrain, Slovakia, Czech Republic, Canada, Colombia, Seychelles, Qatar, Zambia, South Sudan, Nigeria, Russia, Tanzania, Slovenia, Netherlands, Tajikistan, Madagascar, Costa Rica, Austria, Vietnam, Nicaragua, Andorra, Comoros, Kiribati, Panama, Afghanistan, Malaysia, Dominica, Mexico, Paraguay, Nepal, Liechtenstein, Bolivia, Suriname, Jamaica, Moldova, Guatemala, Estonia, Haiti, Finland, Poland, Kenya, Belarus, Mauritania. A well-shaped logistics link and a partnership network help us to ship our items anywhere in the world immediately without damaging product quality.
A special source of repute for FAMAGA is its employees, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the sphere of industrial equipment.
All merchandises from FAMAGA are verified - we are responsible for the result of our work. Now, more than 10 million units of products have been supplied, and this quantity is increasing every day. We are proud that users choose FAMAGA again and again, and we are glad to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To consult or order, call us by phone or send a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Type | Material | Surface Treatment | Hardness | ||
Standard | Configurable | ||||
Standard Grade | Precision Grade | ||||
- | FTCLS | - | EN 1.0038 Equiv. | - | - |
- | FTCLC | FTCLMC | EN 1.1191 Equiv. | - | - |
TCLB | FTCLB | FTCLMB | Black Oxide | ||
TCLM | FTCLM | FTCLMM | Electroless Nickel Plating | ||
- | FTCLBB | - | Brass (JIS EN CW614N Equiv.) | - | - |
TCLA | FTCLA | - | Aluminum Alloy 2000 series | Clear Anodize | - |
- | FTCLAB | Black Anodize | |||
TCLSS | FTCLSS | - | EN 1.4301 Equiv. | - | - |
- | FTCLCH | - | EN 1.1191 Equiv. | - | 45~50HRC |
FTCLBH | Black Oxide | ||||
FTCLMH | Electroless Nickel Plating | ||||
- | FTCLSK | - | EN 1.2510 Equiv. | - | 55HRC~ |
- | FTCLSH | FTCMSH | EN 1.4031 Equiv. | - | 45~50HRC |
Part Number | - | D | - | L |
TCLB10 | - | 20 | - | 60.0 |
Part Number | - | V | - | D | - | H | - | T | - | L |
FTCLB | - | V10.5 | - | D20 | - | H30 | - | T4 | - | L23.8 |
Part Number | - | V | - | D | - | H | - | T | - | L |
FTCLMB | - | V10.5 | - | D20 | - | H30 | - | T4 | - | L23.8 |
Part Number | D Selection | L 0.1mm Increment | ||||||||||||||||
Type | V | |||||||||||||||||
TCLB TCLM TCLA TCLSS | 2 | 5 | 6 | 8 | 10 | 10.0~16.0 | ||||||||||||
3 | 5 | 6 | 8 | 10 | 12 | 10.0~50.0 | ||||||||||||
4 | 6 | 8 | 10 | 12 | 13 | 14 | 15 | 16 | 20 | |||||||||
5 | 8 | 10 | 12 | 13 | 14 | 15 | 16 | 20 | ||||||||||
6 | 8 | 10 | 12 | 13 | 14 | 15 | 16 | 20 | 25 | |||||||||
8 | 10 | 12 | 13 | 14 | 15 | 16 | 20 | 25 | 30 | 10.0~100.0 | ||||||||
10 | 12 | 13 | 14 | 15 | 16 | 20 | 25 | 30 | 35 | 40 | 50 | |||||||
12 | 15 | 16 | 20 | 25 | 30 | 35 | 40 | 50 | ||||||||||
15 | 20 | 25 | 30 | 35 | 40 | 50 | 60 | |||||||||||
16 | 20 | 25 | 30 | 35 | 40 | 50 | 60 | |||||||||||
20 | 25 | 30 | 35 | 40 | 50 | 60 | ||||||||||||
25 | 30 | 35 | 40 | 50 | 60 | |||||||||||||
30 | 40 | 50 | 60 |
Part Number | Unit Price | ||||
Type | V | L10.0~25.0 | 25.1~50.0 | 50.1~75.0 | 75.1~100.0 |
TCLB | 2 | - | - | - | |
3 4 5 | - | - | |||
6 | - | - | |||
8 10 | |||||
12 | |||||
15 | |||||
16 | |||||
20 | |||||
25 | |||||
30 | |||||
TCLM | 2 | - | - | - | |
3 4 5 | - | - | |||
6 | - | - | |||
8 10 | |||||
12 | |||||
15 | |||||
16 | |||||
20 | |||||
25 | |||||
30 |
Part Number | Unit Price | ||||
Type | V | L10.0~25.0 | 25.1~50.0 | 50.1~75.0 | 75.1~100.0 |
TCLA | 2 | - | - | - | |
3 4 5 | - | - | |||
6 | - | - | |||
8 10 | |||||
12 | |||||
15 | |||||
16 | |||||
20 | |||||
25 | |||||
30 | |||||
TCLSS | 2 | - | - | - | |
3 4 5 | - | - | |||
6 | - | - | |||
8 10 | |||||
12 | |||||
15 | |||||
16 | |||||
20 | |||||
25 | |||||
30 |
Part Number | V 0.5mm Increment (V3 or More) | D | H | T 1mm Increment | L 0.1mm Increment | Unit Price | ||||||||||
FTCLS | FTCLC | FTCLB | FTCLM FTCLBB | FTCLA | FTCLAB FTCLSS | FTCLCH | FTCLBH | FTCLMH | FTCLSK | FTCLSH | ||||||
FTCLS FTCLC FTCLB FTCLM FTCLBB FTCLA FTCLAB FTCLSS FTCLCH FTCLBH FTCLMH FTCLSK FTCLSH | (Selection) 2.0 2.6 (0.5mm Increment) 3.0~55.0 | 4.0~10.0 (0.5mm Increment) | 6.0~20.0 (0.5mm Increment) | 1~20 (T≤L-1) FTCLBB (2≤T≤L-2) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||||||
50.1~ 75.0 | ||||||||||||||||
75.1~ 100.0 | ||||||||||||||||
10.5~20 (0.5mm Increment) | 12.5~30 (0.5mm Increment) | 10.0~ 25.0 | ||||||||||||||
25.1~ 50.0 | ||||||||||||||||
50.1~ 75.0 | ||||||||||||||||
75.1~ 100.0 | ||||||||||||||||
21~30 (1mm Increment) | 23~40 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||
25.1~ 50.0 | ||||||||||||||||
50.1~ 75.0 | ||||||||||||||||
75.1~ 100.0 | ||||||||||||||||
31~40 (1mm Increment) | 33~50 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||
25.1~ 50.0 | ||||||||||||||||
50.1~ 75.0 | ||||||||||||||||
75.1~ 100.0 | ||||||||||||||||
41~50 (1mm Increment) | 43~60 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||
25.1~ 50.0 | ||||||||||||||||
50.1~ 75.0 | ||||||||||||||||
75.1~ 100.0 | ||||||||||||||||
51~60 (1mm Increment) | 53~70 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||
25.1~ 50.0 | ||||||||||||||||
50.1~ 75.0 | ||||||||||||||||
75.1~ 100.0 | ||||||||||||||||
D−V Machining Conditions 10.0≤L≤50.0 (D-V)/2≥1 50.1≤L≤100.0 (D-V)/2≥3 | D−V Machining Conditions (FTCLSK, FTCLBB) 4≤D≤10 V≤D-2 10.5≤D≤30 V≤D-4 31≤D≤60 V≤D-6 | H-D≥2 D/10≤L≤Vx8 |
Part Number | V 0.5mm Increment (V3 or More) | D | H | T 0.5mm Increment | L 0.1mm Increment | Unit Price | |||
FTCLMC | FTCLMB | FTCLMM | FTCMSH | ||||||
FTCLMC FTCLMB FTCLMM FTCMSH | (Selection) 2.0 2.6 (0.5mm Increment) 3.0~55.0 | 4.0~10.0 (0.5mm Increment) | 6.0~20.0 (0.5mm Increment) | 1.0~20.0 | 10.0~ 25.0 | ||||
25.1~ 50.0 | |||||||||
50.1~ 75.0 | |||||||||
75.1~100.0 | |||||||||
10.5~20 (0.5mm Increment) | 12.5~30 (0.5mm Increment) | 2.0~20.0 | 10.0~ 25.0 | ||||||
25.1~ 50.0 | |||||||||
50.1~ 75.0 | |||||||||
75.1~100.0 | |||||||||
21~30 (1mm Increment) | 23~40 (1mm Increment) | 3.0~20.0 | 10.0~ 25.0 | ||||||
25.1~ 50.0 | |||||||||
50.1~ 75.0 | |||||||||
75.1~100.0 | |||||||||
31~40 (1mm Increment) | 33~50 (1mm Increment) | 10.0~ 25.0 | |||||||
25.1~ 50.0 | |||||||||
50.1~ 75.0 | |||||||||
75.1~100.0 | |||||||||
41~50 (1mm Increment) | 43~60 (1mm Increment) | 10.0~ 25.0 | |||||||
25.1~ 50.0 | |||||||||
50.1~ 75.0 | |||||||||
75.1~100.0 | |||||||||
51~60 (1mm Increment) | 53~70 (1mm Increment) | 10.0~ 25.0 | |||||||
25.1~ 50.0 | |||||||||
50.1~ 75.0 | |||||||||
75.1~100.0 | |||||||||
D−V Machining Conditions 4≤D≤10 V≤D-2 10.5≤D≤30 V≤D-4 31≤D≤60 V≤D-6 | H-D≥2 | T≤L-1 | D/10≤L≤Vx8 |