We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
FTCLS-V[3-55/0.5]-D[4-20/0.5]-H[31-70/1]-T[1-20/1]-L[10-100/0.1]
Description
Collars/Flanged/Length -0.30 & +-0.01 mm/ID&OD Selectable
Stock availability:
On request
If you are pursuing MISUMI FTCLS-V[3-55/0.5]-D[4-20/0.5]-H[31-70/1]-T[1-20/1]-L[10-100/0.1], communicate with FAMAGA, the world's main producer of industrial equipment. Our company has advanced for more than ten years - these are ages of experience, which are expressed in the quality of outcomes and special attention to each customer. We esteem everyone, who worked with us - so, our regular consumers get the most attractive purchase terms and discounts on the manufacturing equipment market. At present, there are more than 4 thousand such purchasers, and we constantly form new agreements. More than 700 agreements are achieved per day, because FAMAGA operates all over the planet Germany, United Kingdom, Angola, Iraq, Sri Lanka, Congo, Burkina Faso, Australia, Samoa, Senegal, Pakistan, Czech Republic, Panama, Cape Verde, Liberia, Malaysia, Japan, Seychelles, Albania, Israel, The Bahamas, Ghana, Poland, South Sudan, Belarus, United Arab Emirates, Ecuador, Guyana, Russia, Cyprus, Mexico, Switzerland, Guatemala, Sudan, Costa Rica, Brunei, Zambia, Morocco, Antigua and Barbuda, Paraguay, Tajikistan, Zimbabwe. A well-built logistics connection and a partnership network guide us to conduct our goods anywhere in the world quickly without compromising product quality.
A specific source of repute for FAMAGA is its employees, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the sphere of machine made streamlined equipment.
All goods from FAMAGA are guaranteed - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been delivered, and this number is increasing every day. We are happy that clients choose FAMAGA again and again, and we are happy to make more advanced and technologically advanced industrial equipment so as not to lower the bar.
To request or order, call us by phone or send a message to the online chat on our site. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Type | Material | Surface Treatment | Hardness | ||
Standard | Configurable | ||||
Standard Grade | Precision Grade | ||||
- | FTCLS | - | EN 1.0038 Equiv. | - | - |
- | FTCLC | FTCLMC | EN 1.1191 Equiv. | - | - |
TCLB | FTCLB | FTCLMB | Black Oxide | ||
TCLM | FTCLM | FTCLMM | Electroless Nickel Plating | ||
- | FTCLBB | - | Brass (JIS EN CW614N Equiv.) | - | - |
TCLA | FTCLA | - | Aluminum Alloy 2000 series | Clear Anodize | - |
- | FTCLAB | Black Anodize | |||
TCLSS | FTCLSS | - | EN 1.4301 Equiv. | - | - |
- | FTCLCH | - | EN 1.1191 Equiv. | - | 45~50HRC |
FTCLBH | Black Oxide | ||||
FTCLMH | Electroless Nickel Plating | ||||
- | FTCLSK | - | EN 1.2510 Equiv. | - | 55HRC~ |
- | FTCLSH | FTCMSH | EN 1.4031 Equiv. | - | 45~50HRC |
Part Number | - | D | - | L |
TCLB10 | - | 20 | - | 60.0 |
Part Number | - | V | - | D | - | H | - | T | - | L |
FTCLB | - | V10.5 | - | D20 | - | H30 | - | T4 | - | L23.8 |
Part Number | - | V | - | D | - | H | - | T | - | L |
FTCLMB | - | V10.5 | - | D20 | - | H30 | - | T4 | - | L23.8 |
Part Number | D Selection | L 0.1mm Increment | ||||||||||||||||
Type | V | |||||||||||||||||
TCLB TCLM TCLA TCLSS | 2 | 5 | 6 | 8 | 10 | 10.0~16.0 | ||||||||||||
3 | 5 | 6 | 8 | 10 | 12 | 10.0~50.0 | ||||||||||||
4 | 6 | 8 | 10 | 12 | 13 | 14 | 15 | 16 | 20 | |||||||||
5 | 8 | 10 | 12 | 13 | 14 | 15 | 16 | 20 | ||||||||||
6 | 8 | 10 | 12 | 13 | 14 | 15 | 16 | 20 | 25 | |||||||||
8 | 10 | 12 | 13 | 14 | 15 | 16 | 20 | 25 | 30 | 10.0~100.0 | ||||||||
10 | 12 | 13 | 14 | 15 | 16 | 20 | 25 | 30 | 35 | 40 | 50 | |||||||
12 | 15 | 16 | 20 | 25 | 30 | 35 | 40 | 50 | ||||||||||
15 | 20 | 25 | 30 | 35 | 40 | 50 | 60 | |||||||||||
16 | 20 | 25 | 30 | 35 | 40 | 50 | 60 | |||||||||||
20 | 25 | 30 | 35 | 40 | 50 | 60 | ||||||||||||
25 | 30 | 35 | 40 | 50 | 60 | |||||||||||||
30 | 40 | 50 | 60 |
Part Number | Unit Price | ||||
Type | V | L10.0~25.0 | 25.1~50.0 | 50.1~75.0 | 75.1~100.0 |
TCLB | 2 | - | - | - | |
3 4 5 | - | - | |||
6 | - | - | |||
8 10 | |||||
12 | |||||
15 | |||||
16 | |||||
20 | |||||
25 | |||||
30 | |||||
TCLM | 2 | - | - | - | |
3 4 5 | - | - | |||
6 | - | - | |||
8 10 | |||||
12 | |||||
15 | |||||
16 | |||||
20 | |||||
25 | |||||
30 |
Part Number | Unit Price | ||||
Type | V | L10.0~25.0 | 25.1~50.0 | 50.1~75.0 | 75.1~100.0 |
TCLA | 2 | - | - | - | |
3 4 5 | - | - | |||
6 | - | - | |||
8 10 | |||||
12 | |||||
15 | |||||
16 | |||||
20 | |||||
25 | |||||
30 | |||||
TCLSS | 2 | - | - | - | |
3 4 5 | - | - | |||
6 | - | - | |||
8 10 | |||||
12 | |||||
15 | |||||
16 | |||||
20 | |||||
25 | |||||
30 |
Part Number | V 0.5mm Increment (V3 or More) | D | H | T 1mm Increment | L 0.1mm Increment | Unit Price | ||||||||||
FTCLS | FTCLC | FTCLB | FTCLM FTCLBB | FTCLA | FTCLAB FTCLSS | FTCLCH | FTCLBH | FTCLMH | FTCLSK | FTCLSH | ||||||
FTCLS FTCLC FTCLB FTCLM FTCLBB FTCLA FTCLAB FTCLSS FTCLCH FTCLBH FTCLMH FTCLSK FTCLSH | (Selection) 2.0 2.6 (0.5mm Increment) 3.0~55.0 | 4.0~10.0 (0.5mm Increment) | 6.0~20.0 (0.5mm Increment) | 1~20 (T≤L-1) FTCLBB (2≤T≤L-2) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||||||
50.1~ 75.0 | ||||||||||||||||
75.1~ 100.0 | ||||||||||||||||
10.5~20 (0.5mm Increment) | 12.5~30 (0.5mm Increment) | 10.0~ 25.0 | ||||||||||||||
25.1~ 50.0 | ||||||||||||||||
50.1~ 75.0 | ||||||||||||||||
75.1~ 100.0 | ||||||||||||||||
21~30 (1mm Increment) | 23~40 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||
25.1~ 50.0 | ||||||||||||||||
50.1~ 75.0 | ||||||||||||||||
75.1~ 100.0 | ||||||||||||||||
31~40 (1mm Increment) | 33~50 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||
25.1~ 50.0 | ||||||||||||||||
50.1~ 75.0 | ||||||||||||||||
75.1~ 100.0 | ||||||||||||||||
41~50 (1mm Increment) | 43~60 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||
25.1~ 50.0 | ||||||||||||||||
50.1~ 75.0 | ||||||||||||||||
75.1~ 100.0 | ||||||||||||||||
51~60 (1mm Increment) | 53~70 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||
25.1~ 50.0 | ||||||||||||||||
50.1~ 75.0 | ||||||||||||||||
75.1~ 100.0 | ||||||||||||||||
D−V Machining Conditions 10.0≤L≤50.0 (D-V)/2≥1 50.1≤L≤100.0 (D-V)/2≥3 | D−V Machining Conditions (FTCLSK, FTCLBB) 4≤D≤10 V≤D-2 10.5≤D≤30 V≤D-4 31≤D≤60 V≤D-6 | H-D≥2 D/10≤L≤Vx8 |
Part Number | V 0.5mm Increment (V3 or More) | D | H | T 0.5mm Increment | L 0.1mm Increment | Unit Price | |||
FTCLMC | FTCLMB | FTCLMM | FTCMSH | ||||||
FTCLMC FTCLMB FTCLMM FTCMSH | (Selection) 2.0 2.6 (0.5mm Increment) 3.0~55.0 | 4.0~10.0 (0.5mm Increment) | 6.0~20.0 (0.5mm Increment) | 1.0~20.0 | 10.0~ 25.0 | ||||
25.1~ 50.0 | |||||||||
50.1~ 75.0 | |||||||||
75.1~100.0 | |||||||||
10.5~20 (0.5mm Increment) | 12.5~30 (0.5mm Increment) | 2.0~20.0 | 10.0~ 25.0 | ||||||
25.1~ 50.0 | |||||||||
50.1~ 75.0 | |||||||||
75.1~100.0 | |||||||||
21~30 (1mm Increment) | 23~40 (1mm Increment) | 3.0~20.0 | 10.0~ 25.0 | ||||||
25.1~ 50.0 | |||||||||
50.1~ 75.0 | |||||||||
75.1~100.0 | |||||||||
31~40 (1mm Increment) | 33~50 (1mm Increment) | 10.0~ 25.0 | |||||||
25.1~ 50.0 | |||||||||
50.1~ 75.0 | |||||||||
75.1~100.0 | |||||||||
41~50 (1mm Increment) | 43~60 (1mm Increment) | 10.0~ 25.0 | |||||||
25.1~ 50.0 | |||||||||
50.1~ 75.0 | |||||||||
75.1~100.0 | |||||||||
51~60 (1mm Increment) | 53~70 (1mm Increment) | 10.0~ 25.0 | |||||||
25.1~ 50.0 | |||||||||
50.1~ 75.0 | |||||||||
75.1~100.0 | |||||||||
D−V Machining Conditions 4≤D≤10 V≤D-2 10.5≤D≤30 V≤D-4 31≤D≤60 V≤D-6 | H-D≥2 | T≤L-1 | D/10≤L≤Vx8 |