We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
FTCLSS-V[3-55/0.5]-D[4-20/0.5]-H[31-70/1]-T[1-20/1]-L[10-100/0.1]
Description
Collars/Flanged/Length -0.30 & +-0.01 mm/ID&OD Selectable
Stock availability:
On request
If you are questing MISUMI FTCLSS-V[3-55/0.5]-D[4-20/0.5]-H[31-70/1]-T[1-20/1]-L[10-100/0.1], communicate with FAMAGA, the world's principle retailer of machine made equipment. Our company has worked for more than ten years - these are cycles of experience, which are expressed in the quality of outcomes and individual attention to each buyer. We esteem everyone, who liased with us - so, our regular customers accept the most attractive purchase forms and discounts on the manufacturing equipment market. Now, there are more than 4 thousand such buyers, and we constantly arrange new agreements. More than 700 purchases are terminated per day, because FAMAGA operates all over the planet Germany, United Kingdom, Italy, Honduras, Dominican Republic, Bhutan, Latvia, Algeria, Mauritania, Uganda, Belarus, Senegal, Cape Verde, Pakistan, Romania, Guinea, Burundi, Togo, Yemen, The Bahamas, Guatemala, Ghana, The Gambia, New Zealand, Indonesia, Croatia, Afghanistan, Estonia, North Korea, Georgia, Malaysia, China, Kuwait, Jordan, Serbia, Seychelles, El Salvador, Philippines, Antigua and Barbuda, Dominica, Niger, Haiti, Eswatini, Qatar, Thailand, Cyprus, Andorra. A well-developed logistics network and a partnership network let us to dispatch our elements anywhere in the world with no delay without damaging product quality.
A particular source of honor for FAMAGA is its personnel, each of whom contributes to common cause. We propose into our team only experts, who already have experience in the sphere of machine made streamlined equipment.
All merchandises from FAMAGA are affirmed - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been delivered, and this number is ascending every day. We are happy that users choose FAMAGA again and again, and we strive to make more advanced and technologically advanced industrial equipment so as not to lower the bar.
To ask a question or order, call us by phone or write a message to the online chat on our site. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Type | Material | Surface Treatment | Hardness | ||
Standard | Configurable | ||||
Standard Grade | Precision Grade | ||||
- | FTCLS | - | EN 1.0038 Equiv. | - | - |
- | FTCLC | FTCLMC | EN 1.1191 Equiv. | - | - |
TCLB | FTCLB | FTCLMB | Black Oxide | ||
TCLM | FTCLM | FTCLMM | Electroless Nickel Plating | ||
- | FTCLBB | - | Brass (JIS EN CW614N Equiv.) | - | - |
TCLA | FTCLA | - | Aluminum Alloy 2000 series | Clear Anodize | - |
- | FTCLAB | Black Anodize | |||
TCLSS | FTCLSS | - | EN 1.4301 Equiv. | - | - |
- | FTCLCH | - | EN 1.1191 Equiv. | - | 45~50HRC |
FTCLBH | Black Oxide | ||||
FTCLMH | Electroless Nickel Plating | ||||
- | FTCLSK | - | EN 1.2510 Equiv. | - | 55HRC~ |
- | FTCLSH | FTCMSH | EN 1.4031 Equiv. | - | 45~50HRC |
Part Number | - | D | - | L |
TCLB10 | - | 20 | - | 60.0 |
Part Number | - | V | - | D | - | H | - | T | - | L |
FTCLB | - | V10.5 | - | D20 | - | H30 | - | T4 | - | L23.8 |
Part Number | - | V | - | D | - | H | - | T | - | L |
FTCLMB | - | V10.5 | - | D20 | - | H30 | - | T4 | - | L23.8 |
Part Number | D Selection | L 0.1mm Increment | ||||||||||||||||
Type | V | |||||||||||||||||
TCLB TCLM TCLA TCLSS | 2 | 5 | 6 | 8 | 10 | 10.0~16.0 | ||||||||||||
3 | 5 | 6 | 8 | 10 | 12 | 10.0~50.0 | ||||||||||||
4 | 6 | 8 | 10 | 12 | 13 | 14 | 15 | 16 | 20 | |||||||||
5 | 8 | 10 | 12 | 13 | 14 | 15 | 16 | 20 | ||||||||||
6 | 8 | 10 | 12 | 13 | 14 | 15 | 16 | 20 | 25 | |||||||||
8 | 10 | 12 | 13 | 14 | 15 | 16 | 20 | 25 | 30 | 10.0~100.0 | ||||||||
10 | 12 | 13 | 14 | 15 | 16 | 20 | 25 | 30 | 35 | 40 | 50 | |||||||
12 | 15 | 16 | 20 | 25 | 30 | 35 | 40 | 50 | ||||||||||
15 | 20 | 25 | 30 | 35 | 40 | 50 | 60 | |||||||||||
16 | 20 | 25 | 30 | 35 | 40 | 50 | 60 | |||||||||||
20 | 25 | 30 | 35 | 40 | 50 | 60 | ||||||||||||
25 | 30 | 35 | 40 | 50 | 60 | |||||||||||||
30 | 40 | 50 | 60 |
Part Number | Unit Price | ||||
Type | V | L10.0~25.0 | 25.1~50.0 | 50.1~75.0 | 75.1~100.0 |
TCLB | 2 | - | - | - | |
3 4 5 | - | - | |||
6 | - | - | |||
8 10 | |||||
12 | |||||
15 | |||||
16 | |||||
20 | |||||
25 | |||||
30 | |||||
TCLM | 2 | - | - | - | |
3 4 5 | - | - | |||
6 | - | - | |||
8 10 | |||||
12 | |||||
15 | |||||
16 | |||||
20 | |||||
25 | |||||
30 |
Part Number | Unit Price | ||||
Type | V | L10.0~25.0 | 25.1~50.0 | 50.1~75.0 | 75.1~100.0 |
TCLA | 2 | - | - | - | |
3 4 5 | - | - | |||
6 | - | - | |||
8 10 | |||||
12 | |||||
15 | |||||
16 | |||||
20 | |||||
25 | |||||
30 | |||||
TCLSS | 2 | - | - | - | |
3 4 5 | - | - | |||
6 | - | - | |||
8 10 | |||||
12 | |||||
15 | |||||
16 | |||||
20 | |||||
25 | |||||
30 |
Part Number | V 0.5mm Increment (V3 or More) | D | H | T 1mm Increment | L 0.1mm Increment | Unit Price | ||||||||||
FTCLS | FTCLC | FTCLB | FTCLM FTCLBB | FTCLA | FTCLAB FTCLSS | FTCLCH | FTCLBH | FTCLMH | FTCLSK | FTCLSH | ||||||
FTCLS FTCLC FTCLB FTCLM FTCLBB FTCLA FTCLAB FTCLSS FTCLCH FTCLBH FTCLMH FTCLSK FTCLSH | (Selection) 2.0 2.6 (0.5mm Increment) 3.0~55.0 | 4.0~10.0 (0.5mm Increment) | 6.0~20.0 (0.5mm Increment) | 1~20 (T≤L-1) FTCLBB (2≤T≤L-2) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||||||
50.1~ 75.0 | ||||||||||||||||
75.1~ 100.0 | ||||||||||||||||
10.5~20 (0.5mm Increment) | 12.5~30 (0.5mm Increment) | 10.0~ 25.0 | ||||||||||||||
25.1~ 50.0 | ||||||||||||||||
50.1~ 75.0 | ||||||||||||||||
75.1~ 100.0 | ||||||||||||||||
21~30 (1mm Increment) | 23~40 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||
25.1~ 50.0 | ||||||||||||||||
50.1~ 75.0 | ||||||||||||||||
75.1~ 100.0 | ||||||||||||||||
31~40 (1mm Increment) | 33~50 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||
25.1~ 50.0 | ||||||||||||||||
50.1~ 75.0 | ||||||||||||||||
75.1~ 100.0 | ||||||||||||||||
41~50 (1mm Increment) | 43~60 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||
25.1~ 50.0 | ||||||||||||||||
50.1~ 75.0 | ||||||||||||||||
75.1~ 100.0 | ||||||||||||||||
51~60 (1mm Increment) | 53~70 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||
25.1~ 50.0 | ||||||||||||||||
50.1~ 75.0 | ||||||||||||||||
75.1~ 100.0 | ||||||||||||||||
D−V Machining Conditions 10.0≤L≤50.0 (D-V)/2≥1 50.1≤L≤100.0 (D-V)/2≥3 | D−V Machining Conditions (FTCLSK, FTCLBB) 4≤D≤10 V≤D-2 10.5≤D≤30 V≤D-4 31≤D≤60 V≤D-6 | H-D≥2 D/10≤L≤Vx8 |
Part Number | V 0.5mm Increment (V3 or More) | D | H | T 0.5mm Increment | L 0.1mm Increment | Unit Price | |||
FTCLMC | FTCLMB | FTCLMM | FTCMSH | ||||||
FTCLMC FTCLMB FTCLMM FTCMSH | (Selection) 2.0 2.6 (0.5mm Increment) 3.0~55.0 | 4.0~10.0 (0.5mm Increment) | 6.0~20.0 (0.5mm Increment) | 1.0~20.0 | 10.0~ 25.0 | ||||
25.1~ 50.0 | |||||||||
50.1~ 75.0 | |||||||||
75.1~100.0 | |||||||||
10.5~20 (0.5mm Increment) | 12.5~30 (0.5mm Increment) | 2.0~20.0 | 10.0~ 25.0 | ||||||
25.1~ 50.0 | |||||||||
50.1~ 75.0 | |||||||||
75.1~100.0 | |||||||||
21~30 (1mm Increment) | 23~40 (1mm Increment) | 3.0~20.0 | 10.0~ 25.0 | ||||||
25.1~ 50.0 | |||||||||
50.1~ 75.0 | |||||||||
75.1~100.0 | |||||||||
31~40 (1mm Increment) | 33~50 (1mm Increment) | 10.0~ 25.0 | |||||||
25.1~ 50.0 | |||||||||
50.1~ 75.0 | |||||||||
75.1~100.0 | |||||||||
41~50 (1mm Increment) | 43~60 (1mm Increment) | 10.0~ 25.0 | |||||||
25.1~ 50.0 | |||||||||
50.1~ 75.0 | |||||||||
75.1~100.0 | |||||||||
51~60 (1mm Increment) | 53~70 (1mm Increment) | 10.0~ 25.0 | |||||||
25.1~ 50.0 | |||||||||
50.1~ 75.0 | |||||||||
75.1~100.0 | |||||||||
D−V Machining Conditions 4≤D≤10 V≤D-2 10.5≤D≤30 V≤D-4 31≤D≤60 V≤D-6 | H-D≥2 | T≤L-1 | D/10≤L≤Vx8 |