We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
FTCLSS-V[3-55/0.5]-D[21-60/1]-H[6-30/0.5]-T[1-20/1]-L[10-100/0.1]
Description
Collars/Flanged/Length -0.30 & +-0.01 mm/ID&OD Selectable
Stock availability:
On request
If you are seeking MISUMI FTCLSS-V[3-55/0.5]-D[21-60/1]-H[6-30/0.5]-T[1-20/1]-L[10-100/0.1], catch up with FAMAGA, the world's primary vendor of manufacturing equipment. Our company has operated for more than ten years - these are years of experience, which are described in the quality of outputs and private attention to each orderer. We admire everyone, who joined with us - hence, our regular purchasers obtain the most helpful purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 4500 such clients, and we constantly sign new agreements. More than 650 contracts are concluded per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Portugal, Burma, Congo, Singapore, Ghana, Haiti, Chile, Syria, Hungary, Yemen, Armenia, Mali, Malawi, Oman, Angola, Macedonia, Turkey, Uzbekistan, Niger, Madagascar, Antigua and Barbuda, Suriname, Bulgaria, North Korea, Kazakhstan, Nigeria, Malaysia, Tunisia, Tonga, India, Iran, The Gambia, Mongolia, Libya, Burundi, Malta, Georgia, Uganda, Egypt, Iraq, United Arab Emirates, Andorra, Kuwait, Denmark, Cyprus. A well-shaped logistics series and a partnership network allow us to deliver our products anywhere in the globe immediately without discrediting product quality.
A specific source of repute for FAMAGA is its staff members, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the direction of factory-made equipment.
All items from FAMAGA are affirmed - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been delivered, and this quantity is rising every day. We are happy that clients choose FAMAGA again and again, and we are glad to make more developed and technologically modern industrial equipment so as not to lower the bar.
To get some advice or book, get in touch with us or send a message to the online chat on our site. You can also forward a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Type | Material | Surface Treatment | Hardness | ||
Standard | Configurable | ||||
Standard Grade | Precision Grade | ||||
- | FTCLS | - | EN 1.0038 Equiv. | - | - |
- | FTCLC | FTCLMC | EN 1.1191 Equiv. | - | - |
TCLB | FTCLB | FTCLMB | Black Oxide | ||
TCLM | FTCLM | FTCLMM | Electroless Nickel Plating | ||
- | FTCLBB | - | Brass (JIS EN CW614N Equiv.) | - | - |
TCLA | FTCLA | - | Aluminum Alloy 2000 series | Clear Anodize | - |
- | FTCLAB | Black Anodize | |||
TCLSS | FTCLSS | - | EN 1.4301 Equiv. | - | - |
- | FTCLCH | - | EN 1.1191 Equiv. | - | 45~50HRC |
FTCLBH | Black Oxide | ||||
FTCLMH | Electroless Nickel Plating | ||||
- | FTCLSK | - | EN 1.2510 Equiv. | - | 55HRC~ |
- | FTCLSH | FTCMSH | EN 1.4031 Equiv. | - | 45~50HRC |
Part Number | - | D | - | L |
TCLB10 | - | 20 | - | 60.0 |
Part Number | - | V | - | D | - | H | - | T | - | L |
FTCLB | - | V10.5 | - | D20 | - | H30 | - | T4 | - | L23.8 |
Part Number | - | V | - | D | - | H | - | T | - | L |
FTCLMB | - | V10.5 | - | D20 | - | H30 | - | T4 | - | L23.8 |
Part Number | D Selection | L 0.1mm Increment | ||||||||||||||||
Type | V | |||||||||||||||||
TCLB TCLM TCLA TCLSS | 2 | 5 | 6 | 8 | 10 | 10.0~16.0 | ||||||||||||
3 | 5 | 6 | 8 | 10 | 12 | 10.0~50.0 | ||||||||||||
4 | 6 | 8 | 10 | 12 | 13 | 14 | 15 | 16 | 20 | |||||||||
5 | 8 | 10 | 12 | 13 | 14 | 15 | 16 | 20 | ||||||||||
6 | 8 | 10 | 12 | 13 | 14 | 15 | 16 | 20 | 25 | |||||||||
8 | 10 | 12 | 13 | 14 | 15 | 16 | 20 | 25 | 30 | 10.0~100.0 | ||||||||
10 | 12 | 13 | 14 | 15 | 16 | 20 | 25 | 30 | 35 | 40 | 50 | |||||||
12 | 15 | 16 | 20 | 25 | 30 | 35 | 40 | 50 | ||||||||||
15 | 20 | 25 | 30 | 35 | 40 | 50 | 60 | |||||||||||
16 | 20 | 25 | 30 | 35 | 40 | 50 | 60 | |||||||||||
20 | 25 | 30 | 35 | 40 | 50 | 60 | ||||||||||||
25 | 30 | 35 | 40 | 50 | 60 | |||||||||||||
30 | 40 | 50 | 60 |
Part Number | Unit Price | ||||
Type | V | L10.0~25.0 | 25.1~50.0 | 50.1~75.0 | 75.1~100.0 |
TCLB | 2 | - | - | - | |
3 4 5 | - | - | |||
6 | - | - | |||
8 10 | |||||
12 | |||||
15 | |||||
16 | |||||
20 | |||||
25 | |||||
30 | |||||
TCLM | 2 | - | - | - | |
3 4 5 | - | - | |||
6 | - | - | |||
8 10 | |||||
12 | |||||
15 | |||||
16 | |||||
20 | |||||
25 | |||||
30 |
Part Number | Unit Price | ||||
Type | V | L10.0~25.0 | 25.1~50.0 | 50.1~75.0 | 75.1~100.0 |
TCLA | 2 | - | - | - | |
3 4 5 | - | - | |||
6 | - | - | |||
8 10 | |||||
12 | |||||
15 | |||||
16 | |||||
20 | |||||
25 | |||||
30 | |||||
TCLSS | 2 | - | - | - | |
3 4 5 | - | - | |||
6 | - | - | |||
8 10 | |||||
12 | |||||
15 | |||||
16 | |||||
20 | |||||
25 | |||||
30 |
Part Number | V 0.5mm Increment (V3 or More) | D | H | T 1mm Increment | L 0.1mm Increment | Unit Price | ||||||||||
FTCLS | FTCLC | FTCLB | FTCLM FTCLBB | FTCLA | FTCLAB FTCLSS | FTCLCH | FTCLBH | FTCLMH | FTCLSK | FTCLSH | ||||||
FTCLS FTCLC FTCLB FTCLM FTCLBB FTCLA FTCLAB FTCLSS FTCLCH FTCLBH FTCLMH FTCLSK FTCLSH | (Selection) 2.0 2.6 (0.5mm Increment) 3.0~55.0 | 4.0~10.0 (0.5mm Increment) | 6.0~20.0 (0.5mm Increment) | 1~20 (T≤L-1) FTCLBB (2≤T≤L-2) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||||||
50.1~ 75.0 | ||||||||||||||||
75.1~ 100.0 | ||||||||||||||||
10.5~20 (0.5mm Increment) | 12.5~30 (0.5mm Increment) | 10.0~ 25.0 | ||||||||||||||
25.1~ 50.0 | ||||||||||||||||
50.1~ 75.0 | ||||||||||||||||
75.1~ 100.0 | ||||||||||||||||
21~30 (1mm Increment) | 23~40 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||
25.1~ 50.0 | ||||||||||||||||
50.1~ 75.0 | ||||||||||||||||
75.1~ 100.0 | ||||||||||||||||
31~40 (1mm Increment) | 33~50 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||
25.1~ 50.0 | ||||||||||||||||
50.1~ 75.0 | ||||||||||||||||
75.1~ 100.0 | ||||||||||||||||
41~50 (1mm Increment) | 43~60 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||
25.1~ 50.0 | ||||||||||||||||
50.1~ 75.0 | ||||||||||||||||
75.1~ 100.0 | ||||||||||||||||
51~60 (1mm Increment) | 53~70 (1mm Increment) | 10.0~ 25.0 | ||||||||||||||
25.1~ 50.0 | ||||||||||||||||
50.1~ 75.0 | ||||||||||||||||
75.1~ 100.0 | ||||||||||||||||
D−V Machining Conditions 10.0≤L≤50.0 (D-V)/2≥1 50.1≤L≤100.0 (D-V)/2≥3 | D−V Machining Conditions (FTCLSK, FTCLBB) 4≤D≤10 V≤D-2 10.5≤D≤30 V≤D-4 31≤D≤60 V≤D-6 | H-D≥2 D/10≤L≤Vx8 |
Part Number | V 0.5mm Increment (V3 or More) | D | H | T 0.5mm Increment | L 0.1mm Increment | Unit Price | |||
FTCLMC | FTCLMB | FTCLMM | FTCMSH | ||||||
FTCLMC FTCLMB FTCLMM FTCMSH | (Selection) 2.0 2.6 (0.5mm Increment) 3.0~55.0 | 4.0~10.0 (0.5mm Increment) | 6.0~20.0 (0.5mm Increment) | 1.0~20.0 | 10.0~ 25.0 | ||||
25.1~ 50.0 | |||||||||
50.1~ 75.0 | |||||||||
75.1~100.0 | |||||||||
10.5~20 (0.5mm Increment) | 12.5~30 (0.5mm Increment) | 2.0~20.0 | 10.0~ 25.0 | ||||||
25.1~ 50.0 | |||||||||
50.1~ 75.0 | |||||||||
75.1~100.0 | |||||||||
21~30 (1mm Increment) | 23~40 (1mm Increment) | 3.0~20.0 | 10.0~ 25.0 | ||||||
25.1~ 50.0 | |||||||||
50.1~ 75.0 | |||||||||
75.1~100.0 | |||||||||
31~40 (1mm Increment) | 33~50 (1mm Increment) | 10.0~ 25.0 | |||||||
25.1~ 50.0 | |||||||||
50.1~ 75.0 | |||||||||
75.1~100.0 | |||||||||
41~50 (1mm Increment) | 43~60 (1mm Increment) | 10.0~ 25.0 | |||||||
25.1~ 50.0 | |||||||||
50.1~ 75.0 | |||||||||
75.1~100.0 | |||||||||
51~60 (1mm Increment) | 53~70 (1mm Increment) | 10.0~ 25.0 | |||||||
25.1~ 50.0 | |||||||||
50.1~ 75.0 | |||||||||
75.1~100.0 | |||||||||
D−V Machining Conditions 4≤D≤10 V≤D-2 10.5≤D≤30 V≤D-4 31≤D≤60 V≤D-6 | H-D≥2 | T≤L-1 | D/10≤L≤Vx8 |