We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
FNCL-V[3-90/0.5]-D[4-20/0.5]-L[10-100/0.1]
Description
Collars/Length +-0.10 & +-0.01 mm/Dimensions Configurable
Stock availability:
On request
If you are pursuing MISUMI FNCL-V[3-90/0.5]-D[4-20/0.5]-L[10-100/0.1], call FAMAGA, the world's principle retailer of machine made equipment. Our company has worked for more than ten years - these are years of experience, which are illustrated in the quality of products and special attention to each buyer. We cherish everyone, who liased with us - hence, our regular consumers accept the most acceptable purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 4500 such consumers, and we constantly form new agreements. More than 600 transactions are made per day, because FAMAGA operates all over the earth Germany, United Kingdom, Costa Rica, Chad, Lesotho, Ukraine, Bosnia and Herzegovina, Colombia, Uganda, Kyrgyzstan, Sweden, Fiji, Switzerland, Nicaragua, Kiribati, Saudi Arabia, Eritrea, Iraq, Uruguay, Liberia, Greece, Tunisia, Cyprus, Chile, El Salvador, Thailand, Poland, Libya, Australia, Ecuador, India, Mozambique, Vietnam, Argentina, Paraguay, Senegal, Indonesia, Hungary, Kenya, Kazakhstan, Mauritius, Bangladesh, Rwanda, Algeria, Haiti. A well-developed logistics chains and a partnership network assist us to deliver our items anywhere in the world with no delay without compromising product quality.
A particular source of pride for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the range of machine made streamlined equipment.
All goods from FAMAGA are guaranteed - we are responsible for the result of our work. At this moment, more than 10 million units of products have been provided, and this number is increasing every day. We are glad that customers choose FAMAGA again and again, and we are happy to make more developed and technologically innovative industrial equipment so as not to lower the bar.
To inquire or order, contact us or write to the online chat on our site. You can also forward a list of the needful equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Part Number | Material | Surface Treatment | |
Standard Grade | Precision Grade | ||
FNCL | FAC | EN 1.0038 Equiv. | - |
FNCLC | FACS | EN 1.1191 Equiv. | - |
FNCLB | FABSC | Black Oxide | |
FNCLM | FAMSC | Electroless Nickel Plating | |
FNCLR | FARSC | LTBC Plating | |
FNCLBB | - | Brass (JIS EN CW614N Equiv.) | - |
FNCLA | FAASC | Aluminum Alloy 2000 series | Clear Anodize |
FNCLAB | - | Black Anodize | |
FNCLSS | FSASC | EN 1.4301 Equiv. | - |
FNCLSSR | FSASCR | LTBC Plating |
Part Number | - | V | - | D | - | L |
FNCLB | - | V10.5 | - | D19.5 | - | L50.5 |
Part Number | - | V | - | D | - | L |
FAMSC | - | V10.5 | - | D19.5 | - | L50.5 |
Part Number | V 0.5mm Increment (V3 or More) | D | L 0.1mm Increment | Unit Price | ||||||||
FNCL | FNCLC | FNCLB | FNCLM | FNCLR | FNCLBB | FNCLA FNCLAB | FNCLSS | FNCLSSR | ||||
FNCL FNCLC FNCLB FNCLM FNCLR FNCLBB FNCLA FNCLAB FNCLSS FNCLSSR | (Selection) 2.0 2.6 (0.5mm Increment) 3.0~90.0 | 4.0~10.0 (0.5mm Increment) | 10.0~ 25.0 | |||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | - | - | ||||||||||
10.5~20.0 (0.5mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | ||||||||||||
21~30 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | ||||||||||||
31~40 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | ||||||||||||
41~50 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | ||||||||||||
51~60 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | ||||||||||||
61~75 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | ||||||||||||
76~80 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | - | |||||||||||
81~100 (1mm Increment) | 10.0~ 25.0 | |||||||||||
25.1~ 50.0 | ||||||||||||
50.1~ 75.0 | ||||||||||||
75.1~ 100.0 | - | |||||||||||
Machining Conditions *1, *2, *3 Foreign Exchange and Foreign Trade Act restricts the export of collars whose O.D. is more than 75mm and over length exceed O.D. Size D>75/L75 is discontinued. |
Part Number | V 0.5mm Increment (V3 or More) | D | L 0.1mm Increment | Unit Price | |||||||
FAC | FACS | FABSC | FAMSC | FARSC | FAASC | FSASC | FSASCR | ||||
FAC FACS FABSC FAMSC FARSC FAASC FSASC FSASCR | (Selection) 2.0 2.6 (0.5mm Increment) 3.0~90.0 | 4.0~10.0 (0.5mm Increment) | 10.0~ 25.0 | ||||||||
25.1~ 50.0 | |||||||||||
50.1~ 75.0 | |||||||||||
75.1~ 100.0 | |||||||||||
10.5~20.0 (0.5mm Increment) | 10.0~ 25.0 | ||||||||||
25.1~ 50.0 | |||||||||||
50.1~ 75.0 | |||||||||||
75.1~ 100.0 | |||||||||||
21~30 (1mm Increment) | 10.0~ 25.0 | ||||||||||
25.1~ 50.0 | |||||||||||
50.1~ 75.0 | |||||||||||
75.1~ 100.0 | |||||||||||
31~40 (1mm Increment) | 10.0~ 25.0 | ||||||||||
25.1~ 50.0 | |||||||||||
50.1~ 75.0 | |||||||||||
75.1~ 100.0 | |||||||||||
41~50 (1mm Increment) | 10.0~ 25.0 | ||||||||||
25.1~ 50.0 | |||||||||||
50.1~ 75.0 | |||||||||||
75.1~ 100.0 | |||||||||||
51~60 (1mm Increment) | 10.0~ 25.0 | ||||||||||
25.1~ 50.0 | |||||||||||
50.1~ 75.0 | |||||||||||
75.1~ 100.0 | |||||||||||
61~80 (1mm Increment) | 10.0~ 25.0 | - | - | - | |||||||
25.1~ 50.0 | - | - | - | ||||||||
50.1~ 75.0 | - | - | - | ||||||||
75.1~ 100.0 | - | - | - | ||||||||
81~100 (1mm Increment) | 10.0~ 25.0 | - | - | - | |||||||
25.1~ 50.0 | - | - | - | ||||||||
50.1~ 75.0 | - | - | - | ||||||||
75.1~ 100.0 | - | - | - | ||||||||
Machining Conditions *1, *2, *3 No specification available for sizes without declaration of value. |