We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are seeking MISUMI CXLK25-40, get in touch with FAMAGA, the world's primary vendor of streamlined equipment. Our company has worked for more than ten years - these are cycles of experience, which are outlined in the quality of merchandises and individual attention to each client. We praise everyone, who engaged with us - therefore, our regular buyers accept the most flexible purchase forms and discounts on the industrial equipment market. Nowadays, there are more than 4 thousand such purchasers, and we constantly compose new agreements. More than 700 proceedings are resolved per day, because FAMAGA works all over the world Germany, United Kingdom, Mali, Palestine, Netherlands, Australia, Lebanon, Ecuador, Indonesia, Iran, Ukraine, Uzbekistan, Cape Verde, Turkmenistan, Malta, Senegal, Zimbabwe, Slovakia, Uruguay, Nigeria, North Korea, Angola, Central African Republic, Swaziland, Uganda, The Gambia, The Bahamas, Vietnam, Sierra Leone, Madagascar, Argentina, Norway, Iraq, Kyrgyzstan, Eswatini, Paraguay, Bosnia and Herzegovina, Denmark, Andorra, Bangladesh, Greece, Libya, Hungary, Cyprus. A well-elaborated logistics series and a partnership network guide us to dispatch our units anywhere in the earth with no delay without damaging product quality.
A specific source of pride for FAMAGA is its employees, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the direction of factory-made equipment.
All outputs from FAMAGA are ensured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this amount is growing every day. We are pleased that buyers choose FAMAGA again and again, and we are glad to make more exceptional and technologically advanced industrial equipment so as stay in control.
To get some advice or place an order, get in touch with us or send a message to the online chat on our official website. You can also direct a list of the desirable equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Type | Through Hole Type | No Hole Type | Material | Hardness | Photo No., Color |
L Selectable | AXNSK | CXSK | Standard Urethane (Ether Polyurethane) | Shore A95 | Natural Color |
AXNHK | CXHK | Shore A90 | |||
AXNMK | CXMK | Standard Urethane (Ester Polyurethane) | Shore A70 | ||
AXNLK | CXLK | Shore A50 | |||
AEXHK | CXEHK | Abrasion Resistant Urethane | Shore A90 | Dark Brown | |
AEXMK | CXEMK | Shore A70 | |||
AXHHK | CXHHK | Heat Resistant Urethane | Shore A90 | Brown | |
L Configurable | AXNS | CXS | Standard Urethane (Ether Polyurethane) | Shore A95 | Natural Color |
AXNH | CXH | Shore A90 | |||
AXNM | CXM | Standard Urethane (Ester Polyurethane) | Shore A70 | ||
AXNL | CXL | Shore A50 | |||
SAXN | SCXN | Extra Low Hardness Urethane - High Impact Resilience (Ether Polyurethane) | Shore A15 | Black |
Part Number | - | L |
AXNLK15 CXM15 | - - | 30 125 |
Part Number | L Selection | V | (M) Applicable Screw | Unit Price | |||||||||||||||||||||||
Type | D | L10 | L15 | L20 | L25 | L30 | L35 | L40 | L45 | L50 | L100 | L200 | L500 | ||||||||||||||
Through Hole Type AXNSK (Shore A95) AXNHK (Shore A90) AXNMK (Shore A70) AXNLK (Shore A50) No Hole Type CXSK (Shore A95) CXHK (Shore A90) CXMK (Shore A70) CXLK (Shore A50) | (8) | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 100 | 200 | - | - | - | ||||||||||||
(10) | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 100 | 200 | ||||||||||||||||
15 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 100 | 200 | 7 | M4 | ||||||||||||||
20 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 100 | 200 | 8.5 | M5 | ||||||||||||||
25 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 100 | 200 | 10 | M6 | ||||||||||||||
30 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 100 | 200 | 500 | 13 | M8 | |||||||||||||
40 | 50 | 100 | 200 | 500 | - | - | - | - | - | - | - | - | |||||||||||||||
50 | 100 | 200 | 500 | 16 | M10 | - | |||||||||||||||||||||
60 | 100 | 200 | 500 | ||||||||||||||||||||||||
D= 8 or 10 is applicable to No Hole Type only. |
Part Number | L Selection | V | (M) Applicable Screw | Unit Price | |||||||||||||||||||||||
Type(Material Multiplier) | D | L10 | L15 | L20 | L25 | L30 | L35 | L40 | L45 | L50 | L100 | L200 | L500 | ||||||||||||||
Through Hole Type AEXHK (Shore A90) (x1.0) AEXMK (Shore A70) (x1.0) AXHHK (Shore A90) (x1.2) No Hole Type CXEHK (Shore A90) (x1.0) CXEMK (Shore A70) (x1.0) CXHHK (Shore A90) (x1.2) | (8) | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 100 | 200 | - | - | - | ||||||||||||
(10) | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 100 | 200 | ||||||||||||||||
15 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 100 | 200 | 7 | M4 | ||||||||||||||
20 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 100 | 200 | 8.5 | M5 | ||||||||||||||
25 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 100 | 200 | 10 | M6 | ||||||||||||||
30 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 100 | 200 | 500 | 13 | M8 | |||||||||||||
40 | 50 | 100 | 200 | 500 | - | - | - | - | - | - | - | - | |||||||||||||||
50 | 100 | 200 | 500 | 16 | M10 | - | |||||||||||||||||||||
60 | 100 | 200 | 500 | ||||||||||||||||||||||||
D= 8 or 10 is applicable to No Hole Type only. |
Part Number | L Standard Urethane 1mm Increment Extra Low Hardness Urethane 5mm Increment | V | (M) Applicable Screw | Unit Price | ||||||||||||||
Standard Urethane | Extra Low Hardness Urethane | |||||||||||||||||
Type | D | L10 ~20 | L21 ~40 | L41 ~60 | L61 ~80 | L81 ~100 | L101 ~150 | L151 ~200 | L10 ~20 | L25 ~40 | L45 ~60 | L65 ~80 | L85 ~100 | L105 ~150 | L155 ~200 | |||
Through Hole Type AXNS(Shore A95) AXNH(Shore A90) AXNM(Shore A70) AXNL(Shore A50) SAXN(Shore A15) No Hole Type CXS(Shore A95) CXH(Shore A90) CXM(Shore A70) CXL(Shore A50) SCXN(Shore A15) | (8) | 10~200 | - | - | - | - | - | - | - | - | - | |||||||
(10) | ||||||||||||||||||
15 | 7 | M4 | ||||||||||||||||
20 | 8.5 | M5 | ||||||||||||||||
25 | 10 | M6 | ||||||||||||||||
30 | 13 | M8 | ||||||||||||||||
40 | - | - | - | - | - | - | - | |||||||||||
50 | 16 | M10 | - | - | - | - | - | - | - | |||||||||
60 | - | - | - | - | - | - | - | |||||||||||
D= 8 or 10 is applicable to No Hole Type only. Only D=15, 20, 25 and 30 are available for SAXN and SCXN. |