MISUMI CXCEH-D[6-100/1]-L[10-300/1]
  MISUMI CXCEH-D[6-100/1]-L[10-300/1]

We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

CXCEH-D[6-100/1]-L[10-300/1] MISUMI

Manufacturer

MISUMI

Country

Japan

Part number

CXCEH-D[6-100/1]-L[10-300/1]

Description

Urethane Bumpers/Fully Configurable

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications CXCEH-D[6-100/1]-L[10-300/1]

If you are pursuing MISUMI CXCEH-D[6-100/1]-L[10-300/1], reach FAMAGA, the world's chief distributor of machine made equipment. Our company has existed for more than ten years - these are ages of experience, which are outlined in the quality of merchandises and private attention to each user. We value everyone, who worked with us - hence, our regular buyers receive the most acceptable purchase terms and discounts on the factory-made equipment market. Nowadays, there are more than 4000 such consumers, and we constantly sign new agreements. More than 650 affairs are settled per day, because FAMAGA works all over the planet . A advanced logistics bond and a partnership network assist us to deliver our goods anywhere in the earth with no delay without disreputing product quality.

A particular source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only specialists, who already have experience in the direction of manufacturing equipment.

All outputs from FAMAGA are affirmed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been delivered, and this number is ascending every day. We are happy that buyers choose FAMAGA again and again, and we are happy to make more progressive and technologically innovative industrial equipment so as not to lower the bar.

To inquire or order, phone us or write a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.

Features CXCEH-D[6-100/1]-L[10-300/1]

Standard / PrecisionThrough Hole TypeNo Hole TypeMaterialHardnessColor (Photo No.)
Standard GradeAXFSCXFSStandard Urethane (Ether Polyurethane)Shore A95Natural Color / Black
AXFHCXFHShore A90
AXFMCXFMStandard Urethane (Ester Polyurethane)Shore A70
AXFLCXFLShore A50
AXFYCXFYShore A30
AXFHECXFHEAntistatic PolyurethaneShore A90Gray
AXFMECXFMEShore A70
AXFLECXFLEShore A50
AXFANCXFANLow Rebound UrethaneShore A70Gray
AXHHFCXHHFHeat Resistant UrethaneShore A90Brown
VULHFCXVHFSuper Abrasion Resistant Urethane VulkollanShore A92Beige
VULMFCXVMFShore A68
AEXHFCXEHFAbrasion Resistant UrethaneShore A90Dark Brown
AEXMFCXEMFShore A70
AXCESCXCESCeramic UrethaneShore A95Gray
AXCEHCXCEHShore A90
AXCEMCXCEMShore A70
Precision GradeAAFSCAFSStandard Urethane (Ether Polyurethane)Shore A95Natural Color / Black
AAFHCAFHShore A90
AAFMCAFMStandard Urethane (Ester Polyurethane)Shore A70
Characteristic Values of Antistatic Urethane
Specific Volume Resistivity2.1x108 cm
Surface Resistivity4.0x109
(Conditions: Temperature 30C Humidity 60%) All other properties are equal to those of urethane of the same hardness. Compression Set of Low Rebound Urethane
Low Rebound Urethane1%
Urethane (Shore A70)25%
* The above data is measured at room temperature 23C. * 70Cx24H 25% Compression Specifications
Part Number-D-L-V-C
AXFME CXFM- -D35 D39- -L51 L42- V23 - B
Part Number1mm IncrementSelection
DLV (For Through Hole Type Only)C (For Standard Urethane Only)
Standard Grade6~100 For Vulkollan Only 6~4510~300 For Vulkollan Only 10~502~86 When D16, V4 When D31, V6N (Natural Color) B (Black)
Through Hole TypeNo Hole Type
AXFSCXFS(Standard UrethaneShore A95)
AXFHCXFH(Standard UrethaneShore A90)
AXFMCXFM(Standard UrethaneShore A70)
AXFLCXFL(Standard UrethaneShore A50)
AXFYCXFY(Standard UrethaneShore A30)
AXFHECXFHE(Antistatic PolyurethaneShore A90)
AXFMECXFME(Antistatic PolyurethaneShore A70)
AXFLECXFLE(Antistatic PolyurethaneShore A50)
AXFANCXFAN(Low Rebound UrethaneShore A70)
AXHHFCXHHF(Heat Resistant UrethaneShore A90)
*VULHF*CXVHF(VulkollanShore A92)
*VULMF*CXVMF(VulkollanShore A68)
AEXHFCXEHF(Abrasion Resistant UrethaneShore A90)
AEXMFCXEMF(Abrasion Resistant UrethaneShore A70)
AXCESCXCES(Ceramic UrethaneShore A95)
AXCEHCXCEH(Ceramic UrethaneShore A90)
AXCEMCXCEM(Ceramic UrethaneShore A70)
Precision Grade
Through Hole TypeNo Hole Type
AAFSCAFS(Standard UrethaneShore A95)
AAFHCAFH(Standard UrethaneShore A90)
AAFMCAFM(Standard UrethaneShore A70)
The thickness of Through Hole Type (D-V)/2 is restricted by L. Refer to the table (Thickness Condition) in the drawing. When V=2, L50. When L201, V8 For Vulkollan, D dim. will be up to 45mm, and L dim. will be up to 50mm. Alterations