We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are questing MISUMI AXNSK15-45, call FAMAGA, the world's major company of industrialized equipment. Our company has operated for more than ten years - these are ages of experience, which are symbolized in the quality of outputs and private attention to each consumer. We understand everyone, who collaborated with us - therefore, our regular consumers pick up the most flexible purchase forms and discounts on the industrial equipment market. Nowadays, there are more than 4000 such clients, and we constantly form new agreements. More than 600 contracts are concluded per day, because FAMAGA supplies all over the world Germany, United Kingdom, Oman, Mozambique, Suriname, United States, Brunei, Azerbaijan, Fiji, Latvia, Togo, Sudan, Slovenia, Brazil, Gambia, Georgia, Nigeria, Romania, Cape Verde, South Sudan, Philippines, Kyrgyzstan, Finland, Estonia, Niger, Tajikistan, Hungary, Seychelles, The Bahamas, Benin, Angola, Belarus, Ukraine, Malaysia, Russia, Dominica, Comoros, Serbia, Haiti, Samoa, Madagascar, Morocco, Montenegro, Albania, Bulgaria, Kuwait, Egypt. A well-built logistics chains and a partnership network let us to dispatch our goods anywhere in the globe immediately without damaging product quality.
A particular source of repute for FAMAGA is its workers, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the direction of industrial equipment.
All goods from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been delivered, and this bulk is increasing every day. We are proud that clients choose FAMAGA again and again, and we are glad to make more developed and technologically innovative industrial equipment so as to stay on the top.
To ask a question or make a request, call us by phone or write a message to the online chat on our site. You can also send a list of the required equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Type | Through Hole Type | No Hole Type | Material | Hardness | Photo No., Color |
L Selectable | AXNSK | CXSK | Standard Urethane (Ether Polyurethane) | Shore A95 | Natural Color |
AXNHK | CXHK | Shore A90 | |||
AXNMK | CXMK | Standard Urethane (Ester Polyurethane) | Shore A70 | ||
AXNLK | CXLK | Shore A50 | |||
AEXHK | CXEHK | Abrasion Resistant Urethane | Shore A90 | Dark Brown | |
AEXMK | CXEMK | Shore A70 | |||
AXHHK | CXHHK | Heat Resistant Urethane | Shore A90 | Brown | |
L Configurable | AXNS | CXS | Standard Urethane (Ether Polyurethane) | Shore A95 | Natural Color |
AXNH | CXH | Shore A90 | |||
AXNM | CXM | Standard Urethane (Ester Polyurethane) | Shore A70 | ||
AXNL | CXL | Shore A50 | |||
SAXN | SCXN | Extra Low Hardness Urethane - High Impact Resilience (Ether Polyurethane) | Shore A15 | Black |
Part Number | - | L |
AXNLK15 CXM15 | - - | 30 125 |
Part Number | L Selection | V | (M) Applicable Screw | Unit Price | |||||||||||||||||||||||
Type | D | L10 | L15 | L20 | L25 | L30 | L35 | L40 | L45 | L50 | L100 | L200 | L500 | ||||||||||||||
Through Hole Type AXNSK (Shore A95) AXNHK (Shore A90) AXNMK (Shore A70) AXNLK (Shore A50) No Hole Type CXSK (Shore A95) CXHK (Shore A90) CXMK (Shore A70) CXLK (Shore A50) | (8) | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 100 | 200 | - | - | - | ||||||||||||
(10) | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 100 | 200 | ||||||||||||||||
15 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 100 | 200 | 7 | M4 | ||||||||||||||
20 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 100 | 200 | 8.5 | M5 | ||||||||||||||
25 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 100 | 200 | 10 | M6 | ||||||||||||||
30 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 100 | 200 | 500 | 13 | M8 | |||||||||||||
40 | 50 | 100 | 200 | 500 | - | - | - | - | - | - | - | - | |||||||||||||||
50 | 100 | 200 | 500 | 16 | M10 | - | |||||||||||||||||||||
60 | 100 | 200 | 500 | ||||||||||||||||||||||||
D= 8 or 10 is applicable to No Hole Type only. |
Part Number | L Selection | V | (M) Applicable Screw | Unit Price | |||||||||||||||||||||||
Type(Material Multiplier) | D | L10 | L15 | L20 | L25 | L30 | L35 | L40 | L45 | L50 | L100 | L200 | L500 | ||||||||||||||
Through Hole Type AEXHK (Shore A90) (x1.0) AEXMK (Shore A70) (x1.0) AXHHK (Shore A90) (x1.2) No Hole Type CXEHK (Shore A90) (x1.0) CXEMK (Shore A70) (x1.0) CXHHK (Shore A90) (x1.2) | (8) | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 100 | 200 | - | - | - | ||||||||||||
(10) | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 100 | 200 | ||||||||||||||||
15 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 100 | 200 | 7 | M4 | ||||||||||||||
20 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 100 | 200 | 8.5 | M5 | ||||||||||||||
25 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 100 | 200 | 10 | M6 | ||||||||||||||
30 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 100 | 200 | 500 | 13 | M8 | |||||||||||||
40 | 50 | 100 | 200 | 500 | - | - | - | - | - | - | - | - | |||||||||||||||
50 | 100 | 200 | 500 | 16 | M10 | - | |||||||||||||||||||||
60 | 100 | 200 | 500 | ||||||||||||||||||||||||
D= 8 or 10 is applicable to No Hole Type only. |
Part Number | L Standard Urethane 1mm Increment Extra Low Hardness Urethane 5mm Increment | V | (M) Applicable Screw | Unit Price | ||||||||||||||
Standard Urethane | Extra Low Hardness Urethane | |||||||||||||||||
Type | D | L10 ~20 | L21 ~40 | L41 ~60 | L61 ~80 | L81 ~100 | L101 ~150 | L151 ~200 | L10 ~20 | L25 ~40 | L45 ~60 | L65 ~80 | L85 ~100 | L105 ~150 | L155 ~200 | |||
Through Hole Type AXNS(Shore A95) AXNH(Shore A90) AXNM(Shore A70) AXNL(Shore A50) SAXN(Shore A15) No Hole Type CXS(Shore A95) CXH(Shore A90) CXM(Shore A70) CXL(Shore A50) SCXN(Shore A15) | (8) | 10~200 | - | - | - | - | - | - | - | - | - | |||||||
(10) | ||||||||||||||||||
15 | 7 | M4 | ||||||||||||||||
20 | 8.5 | M5 | ||||||||||||||||
25 | 10 | M6 | ||||||||||||||||
30 | 13 | M8 | ||||||||||||||||
40 | - | - | - | - | - | - | - | |||||||||||
50 | 16 | M10 | - | - | - | - | - | - | - | |||||||||
60 | - | - | - | - | - | - | - | |||||||||||
D= 8 or 10 is applicable to No Hole Type only. Only D=15, 20, 25 and 30 are available for SAXN and SCXN. |