We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are looking for MISUMI UM6-50, call FAMAGA, the world's top supplier of factory-made equipment. Our company has functioned for more than ten years - these are years of experience, which are symbolized in the quality of merchandises and personalseparate attention to each buyer. We appreciate everyone, who worked with us - hence, our regular consumers get the most convenient purchase terms and discounts on the factory-made equipment market. At this moment, there are more than 3500 such consumers, and we constantly make new agreements. More than 600 affairs are settled per day, because FAMAGA works all over the planet Germany, United Kingdom, Belize, Mauritius, Romania, Tonga, Peru, Burkina Faso, Estonia, United Arab Emirates, Colombia, Kazakhstan, The Bahamas, Seychelles, Mali, Mexico, Malta, Qatar, Latvia, Botswana, Turkey, Switzerland, Japan, Antigua and Barbuda, Costa Rica, Guatemala, Norway, Angola, Guyana, Tajikistan, Bosnia and Herzegovina, Zimbabwe, Syria, Indonesia, Argentina, Jamaica, Slovakia, Kuwait, Suriname, Comoros, Tanzania, Samoa, Cape Verde. A advanced logistics bond and a partnership network assist us to dispatch our products anywhere in the world with no delay without compromising product quality.
A special source of honor for FAMAGA is its team members, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All products from FAMAGA are assured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been delivered, and this number is growing every day. We are happy that customers choose FAMAGA again and again, and we are eager to make more progressive and technologically advanced industrial equipment so as to stay on the top.
To request or order, phone us or write to the online chat on our official website. You can also forward a list of the needful equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Part Number |
UM16-80 UH16-80 |
Part Number | d | Solid Length | F max. | N{kgf}max. | Fa% | Unit Price | ||
TypeD-L | ||||||||
UM 4- | 5* | 0.4 | 2.2 | 1.75 | 3.4 | {0.35} | 35 | |
10* | 0.5 | 4.9 | 3.5 | 6.8 | {0.7 } | |||
15 | 0.55 | 7.5 | 5.25 | 10.3 | {1.05} | |||
20 | 0.6 | 11.1 | 7 | 13.7 | {1.4 } | |||
25 | 0.6 | 11.1 | 8.75 | 17.2 | {1.75} | |||
30 | 0.65 | 16.3 | 10.5 | 20.6 | {2.1 } | |||
UM 5- | 5* | 0.45 | 2.25 | 1.75 | 3.4 | {0.35} | 35 | |
10* | 0.5 | 3.13 | 3.5 | 6.8 | {0.7 } | |||
15 | 0.65 | 8.45 | 5.25 | 10.3 | {1.05} | |||
20 | 0.65 | 8.45 | 7 | 13.7 | {1.4 } | |||
25 | 0.7 | 11.9 | 8.75 | 17.2 | {1.75} | |||
30 | 0.7 | 11.9 | 10.5 | 20.6 | {2.1 } | |||
35 | 0.75 | 16.5 | 12.25 | 24.0 | {2.45} | |||
40 | 0.8 | 23.2 | 14 | 27.5 | {2.8 } | |||
45 | 0.8 | 23.2 | 15.75 | 30.9 | {3.15} | |||
50 | 0.85 | 31.45 | 17.5 | 34.3 | {3.5 } | |||
UM 6- | 5* | 0.55 | 2.7 | 1.7 | 4.9 | {0.5 } | 35 | |
10 | 0.7 | 5.6 | 3.5 | 10.8 | {1.1 } | |||
15 | 0.75 | 7.4 | 5.2 | 15.7 | {1.6 } | |||
20 | 0.75 | 7.4 | 7 | 20.6 | {2.1 } | |||
25 | 0.85 | 12.8 | 8.7 | 25.5 | {2.6 } | |||
30 | 0.85 | 12.8 | 10.5 | 31.4 | {3.2 } | |||
35 | 0.9 | 16.7 | 12.2 | 36.3 | {3.7 } | |||
40 | 0.9 | 16.8 | 14 | 41.2 | {4.2 } | |||
45 | 1.0 | 27.8 | 15.8 | 46.1 | {4.7 } | |||
50 | 1.0 | 28.0 | 17.5 | 52.0 | {5.3 } | |||
60 | 1.0 | 28.0 | 18 | 53.0 | {5.4 } | 30 | ||
70 | 1.1 | 46.2 | 20 | 58.8 | {6 } | 28 | ||
UM 8- | 10 | 0.85 | 6.4 | 3.5 | 10.8 | {1.1 } | 35 | |
15 | 0.9 | 7.9 | 5.2 | 15.7 | {1.6 } | |||
20 | 0.9 | 7.9 | 7 | 20.6 | {2.1 } | |||
25 | 0.9 | 7.9 | 8.7 | 25.5 | {2.6 } | |||
30 | 1.0 | 12.0 | 10.5 | 31.4 | {3.2 } | |||
35 | 1.0 | 12.0 | 12.2 | 36.3 | {3.7 } | |||
40 | 1.1 | 18.7 | 14 | 41.2 | {4.2 } | |||
45 | 1.1 | 18.7 | 15.8 | 46.1 | {4.7 } | |||
50 | 1.1 | 18.7 | 17.5 | 52.0 | {5.3 } | |||
60 | 1.2 | 28.2 | 21 | 61.8 | {6.3 } | |||
70 | 1.3 | 42.0 | 24.5 | 72.6 | {7.4 } | |||
UM10- | 10 | 0.9 | 5.2 | 3.5 | 10.8 | {1.1} | 35 | |
15 | 1.0 | 7.3 | 5.2 | 15.7 | {1.6} | |||
20 | 1.0 | 7.3 | 7 | 20.6 | {2.1} | |||
25 | 1.1 | 10.5 | 8.7 | 25.5 | {2.6} | |||
30 | 1.1 | 10.5 | 10.5 | 31.4 | {3.2} | |||
35 | 1.2 | 15 | 12.2 | 36.3 | {3.7} | |||
40 | 1.2 | 15 | 14 | 41.2 | {4.2} | |||
45 | 1.3 | 21.8 | 15.8 | 46.1 | {4.7} | |||
50 | 1.3 | 21.8 | 17.5 | 52.0 | {5.3} | |||
60 | 1.4 | 30.8 | 21 | 61.8 | {6.3} | |||
70 | 1.4 | 30.8 | 24.5 | 72.6 | {7.4} | |||
UM13- | 15 | 1.2 | 8.4 | 5.2 | 15.7 | {1.6} | 35 | |
20 | 1.3 | 11.1 | 7 | 20.6 | {2.1} | |||
25 | 1.3 | 11.1 | 8.7 | 25.5 | {2.6} | |||
30 | 1.4 | 15.1 | 10.5 | 31.4 | {3.2} | |||
35 | 1.4 | 15.1 | 12.2 | 36.3 | {3.7} | |||
40 | 1.4 | 15.1 | 14 | 41.2 | {4.2} | |||
45 | 1.4 | 15.1 | 15.8 | 46.1 | {4.7} | |||
50 | 1.4 | 15.1 | 17.5 | 52.0 | {5.3} | |||
60 | 1.6 | 27.2 | 21 | 61.8 | {6.3} | |||
70 | 1.6 | 27.2 | 24.5 | 72.6 | {7.4} | |||
80 | 1.7 | 36.2 | 28 | 82.4 | {8.4} | |||
UM16- | 15 | 1.4 | 9.6 | 5.2 | 15.7 | { 1.6} | 35 | |
20 | 1.5 | 12.4 | 7 | 20.6 | { 2.1} | |||
25 | 1.5 | 12.4 | 8.7 | 25.5 | { 2.6} | |||
30 | 1.5 | 12.4 | 10.5 | 31.4 | { 3.2} | |||
35 | 1.6 | 15.6 | 12.2 | 36.3 | { 3.7} | |||
40 | 1.6 | 15.6 | 14 | 41.2 | { 4.2} | |||
45 | 1.7 | 20.4 | 15.8 | 46.1 | { 4.7} | |||
50 | 1.7 | 20.4 | 17.5 | 52.0 | { 5.3} | |||
60 | 1.8 | 26.1 | 21 | 61.8 | { 6.3} | |||
70 | 1.8 | 26.1 | 24.5 | 72.6 | { 7.4} | |||
80 | 1.8 | 26.1 | 28 | 82.4 | { 8.4} | |||
UM20- | 20 | 1.8 | 11.3 | 7 | 34.3 | { 3.5} | 35 | |
25 | 1.9 | 13.3 | 8.8 | 43.1 | { 4.4} | |||
30 | 1.9 | 13.3 | 10.5 | 52.0 | { 5.3} | |||
35 | 2 | 16 | 12.3 | 59.8 | { 6.1} | |||
40 | 2 | 16 | 14 | 68.6 | { 7 } | |||
45 | 2.2 | 23.7 | 15.8 | 77.5 | { 7.9} | |||
50 | 2.2 | 23.7 | 17.5 | 86.3 | { 8.8} | |||
60 | 2.2 | 23.7 | 21 | 103.0 | {10.5} | |||
70 | 2.4 | 34.8 | 24.5 | 120.6 | {12.3} | |||
80 | 2.4 | 34.8 | 28 | 137.3 | {14 } |
Part Number | d | Solid Length | F max. | N{kgf}max. | Fa% | Unit Price | ||
Type D-L | ||||||||
UH 4- | 5* | 0.45 | 2.7 | 1.5 | 4.4 | { 0.45} | 30 | |
10* | 0.5 | 3.8 | 3 | 8.8 | { 0.9 } | |||
15 | 0.6 | 8.1 | 4.5 | 13.2 | { 1.35} | |||
20 | 0.65 | 11.7 | 6 | 17.6 | { 1.8 } | |||
25 | 0.7 | 16.8 | 7.5 | 22.1 | { 2.25} | |||
30 | 0.7 | 16.8 | 9 | 26.5 | { 2.7 } | |||
UH 5- | 5* | 0.55 | 3.3 | 1.5 | 4.4 | { 0.45} | 30 | |
10 | 0.6 | 4.65 | 3 | 8.8 | { 0.9 } | |||
15 | 0.6 | 4.65 | 4.5 | 13.2 | { 1.35} | |||
20 | 0.75 | 11.81 | 6 | 17.6 | { 1.8 } | |||
25 | 0.75 | 11.81 | 7.5 | 22.1 | { 2.25} | |||
30 | 0.8 | 16 | 9 | 26.5 | { 2.7 } | |||
35 | 0.85 | 21.68 | 10.5 | 30.9 | { 3.15} | |||
40 | 0.85 | 21.68 | 12 | 35.3 | { 3.6 } | |||
45 | 0.9 | 28.8 | 13.5 | 39.7 | { 4.05} | |||
UH 6- | 5* | 0.65 | 3.2 | 1.5 | 8.8 | { 0.9 } | 30 | |
10 | 0.7 | 3.9 | 3 | 17.7 | { 1.8 } | |||
15 | 0.85 | 7.7 | 4.5 | 26.5 | { 2.7 } | |||
20 | 0.9 | 9.7 | 6 | 35.3 | { 3.6 } | |||
25 | 1.0 | 15.5 | 7.5 | 44.1 | { 4.5 } | |||
30 | 1.0 | 15.5 | 9 | 53.0 | { 5.4 } | |||
35 | 1.1 | 24.8 | 9.8 | 57.9 | { 5.9 } | 28 | ||
40 | 1.1 | 24.8 | 10 | 58.8 | { 6 } | 25 | ||
45 | 1.1 | 24.8 | 11.3 | 66.7 | { 6.8 } | |||
50 | 1.2 | 39.0 | 10 | 58.8 | { 6 } | 20 | ||
60 | 1.2 | 39.0 | 14 | 82.4 | { 8.4 } | 23 | ||
70 | 1.2 | 39.0 | 15 | 88.3 | { 9 } | 21 | ||
UH 8- | 10 | 0.9 | 5.3 | 3 | 17.7 | { 1.8 } | 30 | |
15 | 0.9 | 5.3 | 4.5 | 26.5 | { 2.7 } | |||
20 | 1.1 | 11 | 6 | 35.3 | { 3.6 } | |||
25 | 1.1 | 11 | 7.5 | 44.1 | { 4.5 } | |||
30 | 1.2 | 15.9 | 9 | 53.0 | { 5.4 } | |||
35 | 1.2 | 15.9 | 10.5 | 61.8 | { 6.3 } | |||
40 | 1.3 | 23.1 | 12 | 70.6 | { 7.2 } | |||
45 | 1.3 | 23.1 | 13.5 | 79.4 | { 8.1 } | |||
50 | 1.4 | 33.3 | 15 | 88.3 | { 9 } | |||
60 | 1.4 | 33.3 | 18 | 105.9 | {10.8 } | |||
70 | 1.5 | 48.0 | 19 | 111.8 | {11.4 } | 27 | ||
UH 10- | 10 | 1.1 | 6.9 | 3 | 17.7 | { 1.8} | 30 | |
15 | 1.1 | 6.9 | 4.5 | 26.5 | { 2.7} | |||
20 | 1.2 | 9.3 | 6 | 35.3 | { 3.6} | |||
25 | 1.2 | 9.3 | 7.5 | 44.1 | { 4.5} | |||
30 | 1.3 | 12.7 | 9 | 53.0 | { 5.4} | |||
35 | 1.4 | 17.5 | 10.5 | 61.8 | { 6.3} | |||
40 | 1.4 | 17.5 | 12 | 70.6 | { 7.2} | |||
45 | 1.5 | 23.8 | 13.5 | 79.4 | { 8.1} | |||
50 | 1.5 | 23.8 | 15 | 88.3 | { 9 } | |||
60 | 1.6 | 32.4 | 18 | 105.9 | {10.8} | |||
70 | 1.7 | 44.2 | 21 | 123.6 | {12.6} | |||
UH 13- | 15 | 1.5 | 9.2 | 4.5 | 44.1 | { 4.5} | 30 | |
20 | 1.5 | 9.2 | 6 | 58.8 | { 6 } | |||
25 | 1.5 | 9.2 | 7.5 | 73.5 | { 7.5} | |||
30 | 1.8 | 18 | 9 | 88.3 | { 9 } | |||
35 | 1.8 | 18 | 10.5 | 103.0 | {10.5} | |||
40 | 1.8 | 18 | 12 | 117.7 | {12 } | |||
45 | 1.8 | 18 | 13.5 | 132.4 | {13.5} | |||
50 | 2.0 | 28.5 | 15 | 147.0 | {15 } | |||
60 | 2.1 | 36 | 18 | 176.5 | {18 } | |||
70 | 2.2 | 45.1 | 21 | 205.9 | {21 } | |||
80 | 2.2 | 45.1 | 20 | 196.1 | {20 } | 25 |
Part Number | d | Solid Length | F max. | N{kgf}max. | Fa% | Unit Price | ||
Type D-L | ||||||||
UH 16- | 15 | 1.7 | 9.6 | 4.6 | 44.1 | { 4.5} | 30 | |
20 | 1.9 | 14 | 6 | 58.8 | { 6 } | |||
25 | 1.9 | 14 | 7.5 | 73.5 | { 7.5} | |||
30 | 1.9 | 14 | 9 | 88.3 | { 9 } | |||
35 | 1.9 | 14 | 10.5 | 103.0 | {10.5} | |||
40 | 2.2 | 25.1 | 12 | 117.7 | {12 } | |||
45 | 2.2 | 25.1 | 13.5 | 132.4 | {13.5} | |||
50 | 2.2 | 25.1 | 15 | 147.1 | {15 } | |||
60 | 2.3 | 30.5 | 18 | 176.5 | {18 } | |||
70 | 2.5 | 44.7 | 21 | 205.9 | {21 } | |||
80 | 2.5 | 44.7 | 24 | 235.4 | {24 } | |||
UH 20- | 25 | 2.3 | 13.8 | 7.5 | 110.8 | {11.3} | 30 | |
30 | 2.3 | 13.8 | 9 | 132.4 | {13.5} | |||
35 | 2.5 | 18.8 | 10.5 | 154.9 | {15.8} | |||
40 | 2.5 | 18.8 | 12 | 176.5 | {18 } | |||
45 | 2.8 | 29.4 | 13.5 | 199.1 | {20.3} | |||
50 | 2.8 | 29.4 | 15 | 220.6 | {22.5} | |||
60 | 3 | 40.5 | 18 | 264.8 | {27 } | |||
70 | 3 | 40.5 | 21 | 308.9 | {31.5} | |||
80 | 3.2 | 54.4 | 24 | 353.0 | { 36 } |
Type | UV | UY | UR | UF | UL | UTT | UM | UH | UBB | ||||||||||||||||||
D | |||||||||||||||||||||||||||
2 | 0.05{0.005} | 0.2{0.02} | 0.3{0.03} | 0.5{0.05} | |||||||||||||||||||||||
3 | N/mm 0.05 {kgf/mm} {0.005} | N/mm 0.098 {kgf/mm} {0.01} | N/mm 0.29 {kgf/mm} {0.03} | N/mm 0.49 {kgf/mm} {0.05} | N/mm 0.98 {kgf/mm} {0.1} | N/mm 1.5 {kgf/mm} {0.15} | |||||||||||||||||||||
4 | 2.0{0.2} | 2.9{0.3} | 4.9{0.5} | ||||||||||||||||||||||||
5 | |||||||||||||||||||||||||||
6 | N/mm 2.0 {kgf/mm} {0.2} | N/mm 2.9 {kgf/mm} {0.3} | N/mm 5.9 {kgf/mm} {0.6} | N/mm 9.8 {kgf/mm} {1.0} | |||||||||||||||||||||||
8 | |||||||||||||||||||||||||||
10 | N/mm 0.2 {kgf/mm} {0.02} | ||||||||||||||||||||||||||
12 | |||||||||||||||||||||||||||
13 | N/mm 9.8 {kgf/mm} {1.0} | N/mm 19.6 {kgf/mm} {2.0} | |||||||||||||||||||||||||
14 | |||||||||||||||||||||||||||
16 | |||||||||||||||||||||||||||
20 | 0.3{0.03} | 0.5{0.05} | 0.98{0.1} | 2.9{0.3} | 3.9{0.4} | 4.9{0.5} | 14.7{1.5} | 29.4{3.0} | |||||||||||||||||||
Fmax. | F=Lx70% | F=LxFa% | F=LxFa% | F=Lx45% | F=Lx40% | F=LxFa% | F=LxFa% | F=LxFa% | F=L?Fa% |