We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are inspecting MISUMI UH16-20, make contact with FAMAGA, the world's main producer of streamlined equipment. Our company has operated for more than ten years - these are years of experience, which are portrayed in the quality of items and special attention to each client. We value everyone, who worked with us - thus, our regular clients receive the most acceptable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4 thousand such consumers, and we constantly compose new agreements. More than 600 transactions are made per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Czech Republic, Qatar, Ireland, Australia, Tonga, Belgium, Netherlands, Suriname, Slovenia, Morocco, Albania, Bosnia and Herzegovina, Dominica, Mauritius, Guatemala, Singapore, Antigua and Barbuda, Seychelles, Laos, Pakistan, Ecuador, Fiji, Cyprus, South Sudan, Afghanistan, Samoa, Eswatini, Panama, Vietnam, India, Cape Verde, Togo, Malaysia, East Timor, Mauritania, Burundi, Estonia, Finland, Bolivia, Swaziland, Georgia, Equatorial Guinea. A well-elaborated logistics system and a partnership network assist us to dispatch our items anywhere in the planet as soon as possible without compromising product quality.
A special source of honor for FAMAGA is its employees, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the sphere of factory-made equipment.
All merchandises from FAMAGA are affirmed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been delivered, and this number is increasing every day. We are happy that customers choose FAMAGA again and again, and we strive to make more developed and technologically developed industrial equipment so as stay in control.
To request or place an order, contact us or write a message to the online chat on our official website. You can also forward a list of the necessary equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Part Number |
UM16-80 UH16-80 |
Part Number | d | Solid Length | F max. | N{kgf}max. | Fa% | Unit Price | ||
TypeD-L | ||||||||
UM 4- | 5* | 0.4 | 2.2 | 1.75 | 3.4 | {0.35} | 35 | |
10* | 0.5 | 4.9 | 3.5 | 6.8 | {0.7 } | |||
15 | 0.55 | 7.5 | 5.25 | 10.3 | {1.05} | |||
20 | 0.6 | 11.1 | 7 | 13.7 | {1.4 } | |||
25 | 0.6 | 11.1 | 8.75 | 17.2 | {1.75} | |||
30 | 0.65 | 16.3 | 10.5 | 20.6 | {2.1 } | |||
UM 5- | 5* | 0.45 | 2.25 | 1.75 | 3.4 | {0.35} | 35 | |
10* | 0.5 | 3.13 | 3.5 | 6.8 | {0.7 } | |||
15 | 0.65 | 8.45 | 5.25 | 10.3 | {1.05} | |||
20 | 0.65 | 8.45 | 7 | 13.7 | {1.4 } | |||
25 | 0.7 | 11.9 | 8.75 | 17.2 | {1.75} | |||
30 | 0.7 | 11.9 | 10.5 | 20.6 | {2.1 } | |||
35 | 0.75 | 16.5 | 12.25 | 24.0 | {2.45} | |||
40 | 0.8 | 23.2 | 14 | 27.5 | {2.8 } | |||
45 | 0.8 | 23.2 | 15.75 | 30.9 | {3.15} | |||
50 | 0.85 | 31.45 | 17.5 | 34.3 | {3.5 } | |||
UM 6- | 5* | 0.55 | 2.7 | 1.7 | 4.9 | {0.5 } | 35 | |
10 | 0.7 | 5.6 | 3.5 | 10.8 | {1.1 } | |||
15 | 0.75 | 7.4 | 5.2 | 15.7 | {1.6 } | |||
20 | 0.75 | 7.4 | 7 | 20.6 | {2.1 } | |||
25 | 0.85 | 12.8 | 8.7 | 25.5 | {2.6 } | |||
30 | 0.85 | 12.8 | 10.5 | 31.4 | {3.2 } | |||
35 | 0.9 | 16.7 | 12.2 | 36.3 | {3.7 } | |||
40 | 0.9 | 16.8 | 14 | 41.2 | {4.2 } | |||
45 | 1.0 | 27.8 | 15.8 | 46.1 | {4.7 } | |||
50 | 1.0 | 28.0 | 17.5 | 52.0 | {5.3 } | |||
60 | 1.0 | 28.0 | 18 | 53.0 | {5.4 } | 30 | ||
70 | 1.1 | 46.2 | 20 | 58.8 | {6 } | 28 | ||
UM 8- | 10 | 0.85 | 6.4 | 3.5 | 10.8 | {1.1 } | 35 | |
15 | 0.9 | 7.9 | 5.2 | 15.7 | {1.6 } | |||
20 | 0.9 | 7.9 | 7 | 20.6 | {2.1 } | |||
25 | 0.9 | 7.9 | 8.7 | 25.5 | {2.6 } | |||
30 | 1.0 | 12.0 | 10.5 | 31.4 | {3.2 } | |||
35 | 1.0 | 12.0 | 12.2 | 36.3 | {3.7 } | |||
40 | 1.1 | 18.7 | 14 | 41.2 | {4.2 } | |||
45 | 1.1 | 18.7 | 15.8 | 46.1 | {4.7 } | |||
50 | 1.1 | 18.7 | 17.5 | 52.0 | {5.3 } | |||
60 | 1.2 | 28.2 | 21 | 61.8 | {6.3 } | |||
70 | 1.3 | 42.0 | 24.5 | 72.6 | {7.4 } | |||
UM10- | 10 | 0.9 | 5.2 | 3.5 | 10.8 | {1.1} | 35 | |
15 | 1.0 | 7.3 | 5.2 | 15.7 | {1.6} | |||
20 | 1.0 | 7.3 | 7 | 20.6 | {2.1} | |||
25 | 1.1 | 10.5 | 8.7 | 25.5 | {2.6} | |||
30 | 1.1 | 10.5 | 10.5 | 31.4 | {3.2} | |||
35 | 1.2 | 15 | 12.2 | 36.3 | {3.7} | |||
40 | 1.2 | 15 | 14 | 41.2 | {4.2} | |||
45 | 1.3 | 21.8 | 15.8 | 46.1 | {4.7} | |||
50 | 1.3 | 21.8 | 17.5 | 52.0 | {5.3} | |||
60 | 1.4 | 30.8 | 21 | 61.8 | {6.3} | |||
70 | 1.4 | 30.8 | 24.5 | 72.6 | {7.4} | |||
UM13- | 15 | 1.2 | 8.4 | 5.2 | 15.7 | {1.6} | 35 | |
20 | 1.3 | 11.1 | 7 | 20.6 | {2.1} | |||
25 | 1.3 | 11.1 | 8.7 | 25.5 | {2.6} | |||
30 | 1.4 | 15.1 | 10.5 | 31.4 | {3.2} | |||
35 | 1.4 | 15.1 | 12.2 | 36.3 | {3.7} | |||
40 | 1.4 | 15.1 | 14 | 41.2 | {4.2} | |||
45 | 1.4 | 15.1 | 15.8 | 46.1 | {4.7} | |||
50 | 1.4 | 15.1 | 17.5 | 52.0 | {5.3} | |||
60 | 1.6 | 27.2 | 21 | 61.8 | {6.3} | |||
70 | 1.6 | 27.2 | 24.5 | 72.6 | {7.4} | |||
80 | 1.7 | 36.2 | 28 | 82.4 | {8.4} | |||
UM16- | 15 | 1.4 | 9.6 | 5.2 | 15.7 | { 1.6} | 35 | |
20 | 1.5 | 12.4 | 7 | 20.6 | { 2.1} | |||
25 | 1.5 | 12.4 | 8.7 | 25.5 | { 2.6} | |||
30 | 1.5 | 12.4 | 10.5 | 31.4 | { 3.2} | |||
35 | 1.6 | 15.6 | 12.2 | 36.3 | { 3.7} | |||
40 | 1.6 | 15.6 | 14 | 41.2 | { 4.2} | |||
45 | 1.7 | 20.4 | 15.8 | 46.1 | { 4.7} | |||
50 | 1.7 | 20.4 | 17.5 | 52.0 | { 5.3} | |||
60 | 1.8 | 26.1 | 21 | 61.8 | { 6.3} | |||
70 | 1.8 | 26.1 | 24.5 | 72.6 | { 7.4} | |||
80 | 1.8 | 26.1 | 28 | 82.4 | { 8.4} | |||
UM20- | 20 | 1.8 | 11.3 | 7 | 34.3 | { 3.5} | 35 | |
25 | 1.9 | 13.3 | 8.8 | 43.1 | { 4.4} | |||
30 | 1.9 | 13.3 | 10.5 | 52.0 | { 5.3} | |||
35 | 2 | 16 | 12.3 | 59.8 | { 6.1} | |||
40 | 2 | 16 | 14 | 68.6 | { 7 } | |||
45 | 2.2 | 23.7 | 15.8 | 77.5 | { 7.9} | |||
50 | 2.2 | 23.7 | 17.5 | 86.3 | { 8.8} | |||
60 | 2.2 | 23.7 | 21 | 103.0 | {10.5} | |||
70 | 2.4 | 34.8 | 24.5 | 120.6 | {12.3} | |||
80 | 2.4 | 34.8 | 28 | 137.3 | {14 } |
Part Number | d | Solid Length | F max. | N{kgf}max. | Fa% | Unit Price | ||
Type D-L | ||||||||
UH 4- | 5* | 0.45 | 2.7 | 1.5 | 4.4 | { 0.45} | 30 | |
10* | 0.5 | 3.8 | 3 | 8.8 | { 0.9 } | |||
15 | 0.6 | 8.1 | 4.5 | 13.2 | { 1.35} | |||
20 | 0.65 | 11.7 | 6 | 17.6 | { 1.8 } | |||
25 | 0.7 | 16.8 | 7.5 | 22.1 | { 2.25} | |||
30 | 0.7 | 16.8 | 9 | 26.5 | { 2.7 } | |||
UH 5- | 5* | 0.55 | 3.3 | 1.5 | 4.4 | { 0.45} | 30 | |
10 | 0.6 | 4.65 | 3 | 8.8 | { 0.9 } | |||
15 | 0.6 | 4.65 | 4.5 | 13.2 | { 1.35} | |||
20 | 0.75 | 11.81 | 6 | 17.6 | { 1.8 } | |||
25 | 0.75 | 11.81 | 7.5 | 22.1 | { 2.25} | |||
30 | 0.8 | 16 | 9 | 26.5 | { 2.7 } | |||
35 | 0.85 | 21.68 | 10.5 | 30.9 | { 3.15} | |||
40 | 0.85 | 21.68 | 12 | 35.3 | { 3.6 } | |||
45 | 0.9 | 28.8 | 13.5 | 39.7 | { 4.05} | |||
UH 6- | 5* | 0.65 | 3.2 | 1.5 | 8.8 | { 0.9 } | 30 | |
10 | 0.7 | 3.9 | 3 | 17.7 | { 1.8 } | |||
15 | 0.85 | 7.7 | 4.5 | 26.5 | { 2.7 } | |||
20 | 0.9 | 9.7 | 6 | 35.3 | { 3.6 } | |||
25 | 1.0 | 15.5 | 7.5 | 44.1 | { 4.5 } | |||
30 | 1.0 | 15.5 | 9 | 53.0 | { 5.4 } | |||
35 | 1.1 | 24.8 | 9.8 | 57.9 | { 5.9 } | 28 | ||
40 | 1.1 | 24.8 | 10 | 58.8 | { 6 } | 25 | ||
45 | 1.1 | 24.8 | 11.3 | 66.7 | { 6.8 } | |||
50 | 1.2 | 39.0 | 10 | 58.8 | { 6 } | 20 | ||
60 | 1.2 | 39.0 | 14 | 82.4 | { 8.4 } | 23 | ||
70 | 1.2 | 39.0 | 15 | 88.3 | { 9 } | 21 | ||
UH 8- | 10 | 0.9 | 5.3 | 3 | 17.7 | { 1.8 } | 30 | |
15 | 0.9 | 5.3 | 4.5 | 26.5 | { 2.7 } | |||
20 | 1.1 | 11 | 6 | 35.3 | { 3.6 } | |||
25 | 1.1 | 11 | 7.5 | 44.1 | { 4.5 } | |||
30 | 1.2 | 15.9 | 9 | 53.0 | { 5.4 } | |||
35 | 1.2 | 15.9 | 10.5 | 61.8 | { 6.3 } | |||
40 | 1.3 | 23.1 | 12 | 70.6 | { 7.2 } | |||
45 | 1.3 | 23.1 | 13.5 | 79.4 | { 8.1 } | |||
50 | 1.4 | 33.3 | 15 | 88.3 | { 9 } | |||
60 | 1.4 | 33.3 | 18 | 105.9 | {10.8 } | |||
70 | 1.5 | 48.0 | 19 | 111.8 | {11.4 } | 27 | ||
UH 10- | 10 | 1.1 | 6.9 | 3 | 17.7 | { 1.8} | 30 | |
15 | 1.1 | 6.9 | 4.5 | 26.5 | { 2.7} | |||
20 | 1.2 | 9.3 | 6 | 35.3 | { 3.6} | |||
25 | 1.2 | 9.3 | 7.5 | 44.1 | { 4.5} | |||
30 | 1.3 | 12.7 | 9 | 53.0 | { 5.4} | |||
35 | 1.4 | 17.5 | 10.5 | 61.8 | { 6.3} | |||
40 | 1.4 | 17.5 | 12 | 70.6 | { 7.2} | |||
45 | 1.5 | 23.8 | 13.5 | 79.4 | { 8.1} | |||
50 | 1.5 | 23.8 | 15 | 88.3 | { 9 } | |||
60 | 1.6 | 32.4 | 18 | 105.9 | {10.8} | |||
70 | 1.7 | 44.2 | 21 | 123.6 | {12.6} | |||
UH 13- | 15 | 1.5 | 9.2 | 4.5 | 44.1 | { 4.5} | 30 | |
20 | 1.5 | 9.2 | 6 | 58.8 | { 6 } | |||
25 | 1.5 | 9.2 | 7.5 | 73.5 | { 7.5} | |||
30 | 1.8 | 18 | 9 | 88.3 | { 9 } | |||
35 | 1.8 | 18 | 10.5 | 103.0 | {10.5} | |||
40 | 1.8 | 18 | 12 | 117.7 | {12 } | |||
45 | 1.8 | 18 | 13.5 | 132.4 | {13.5} | |||
50 | 2.0 | 28.5 | 15 | 147.0 | {15 } | |||
60 | 2.1 | 36 | 18 | 176.5 | {18 } | |||
70 | 2.2 | 45.1 | 21 | 205.9 | {21 } | |||
80 | 2.2 | 45.1 | 20 | 196.1 | {20 } | 25 |
Part Number | d | Solid Length | F max. | N{kgf}max. | Fa% | Unit Price | ||
Type D-L | ||||||||
UH 16- | 15 | 1.7 | 9.6 | 4.6 | 44.1 | { 4.5} | 30 | |
20 | 1.9 | 14 | 6 | 58.8 | { 6 } | |||
25 | 1.9 | 14 | 7.5 | 73.5 | { 7.5} | |||
30 | 1.9 | 14 | 9 | 88.3 | { 9 } | |||
35 | 1.9 | 14 | 10.5 | 103.0 | {10.5} | |||
40 | 2.2 | 25.1 | 12 | 117.7 | {12 } | |||
45 | 2.2 | 25.1 | 13.5 | 132.4 | {13.5} | |||
50 | 2.2 | 25.1 | 15 | 147.1 | {15 } | |||
60 | 2.3 | 30.5 | 18 | 176.5 | {18 } | |||
70 | 2.5 | 44.7 | 21 | 205.9 | {21 } | |||
80 | 2.5 | 44.7 | 24 | 235.4 | {24 } | |||
UH 20- | 25 | 2.3 | 13.8 | 7.5 | 110.8 | {11.3} | 30 | |
30 | 2.3 | 13.8 | 9 | 132.4 | {13.5} | |||
35 | 2.5 | 18.8 | 10.5 | 154.9 | {15.8} | |||
40 | 2.5 | 18.8 | 12 | 176.5 | {18 } | |||
45 | 2.8 | 29.4 | 13.5 | 199.1 | {20.3} | |||
50 | 2.8 | 29.4 | 15 | 220.6 | {22.5} | |||
60 | 3 | 40.5 | 18 | 264.8 | {27 } | |||
70 | 3 | 40.5 | 21 | 308.9 | {31.5} | |||
80 | 3.2 | 54.4 | 24 | 353.0 | { 36 } |
Type | UV | UY | UR | UF | UL | UTT | UM | UH | UBB | ||||||||||||||||||
D | |||||||||||||||||||||||||||
2 | 0.05{0.005} | 0.2{0.02} | 0.3{0.03} | 0.5{0.05} | |||||||||||||||||||||||
3 | N/mm 0.05 {kgf/mm} {0.005} | N/mm 0.098 {kgf/mm} {0.01} | N/mm 0.29 {kgf/mm} {0.03} | N/mm 0.49 {kgf/mm} {0.05} | N/mm 0.98 {kgf/mm} {0.1} | N/mm 1.5 {kgf/mm} {0.15} | |||||||||||||||||||||
4 | 2.0{0.2} | 2.9{0.3} | 4.9{0.5} | ||||||||||||||||||||||||
5 | |||||||||||||||||||||||||||
6 | N/mm 2.0 {kgf/mm} {0.2} | N/mm 2.9 {kgf/mm} {0.3} | N/mm 5.9 {kgf/mm} {0.6} | N/mm 9.8 {kgf/mm} {1.0} | |||||||||||||||||||||||
8 | |||||||||||||||||||||||||||
10 | N/mm 0.2 {kgf/mm} {0.02} | ||||||||||||||||||||||||||
12 | |||||||||||||||||||||||||||
13 | N/mm 9.8 {kgf/mm} {1.0} | N/mm 19.6 {kgf/mm} {2.0} | |||||||||||||||||||||||||
14 | |||||||||||||||||||||||||||
16 | |||||||||||||||||||||||||||
20 | 0.3{0.03} | 0.5{0.05} | 0.98{0.1} | 2.9{0.3} | 3.9{0.4} | 4.9{0.5} | 14.7{1.5} | 29.4{3.0} | |||||||||||||||||||
Fmax. | F=Lx70% | F=LxFa% | F=LxFa% | F=Lx45% | F=Lx40% | F=LxFa% | F=LxFa% | F=LxFa% | F=L?Fa% |