We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are pursuing MISUMI UFSP5-0.5-[10-500/1], communicate with FAMAGA, the world's central company of industrialized equipment. Our company has lasted for more than ten years - these are cycles of experience, which are symbolized in the quality of products and private attention to each orderer. We esteem everyone, who joined with us - therefore, our regular buyers accept the most favorable purchase forms and discounts on the industrial equipment market. Nowadays, there are more than 4000 such clients, and we constantly compose new agreements. More than 650 transactions are made per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Sri Lanka, South Korea, Costa Rica, Netherlands, Romania, Israel, Tanzania, Burundi, Estonia, Liechtenstein, Gambia, United Arab Emirates, Burma, South Sudan, Morocco, Panama, Georgia, Malaysia, Haiti, Djibouti, Brazil, Monaco, Australia, Dominica, Tunisia, Mali, Samoa, Poland, Angola, Sweden, Czech Republic, Mozambique, Comoros, Bulgaria, Brunei, Latvia, Burkina Faso, Iceland, Tajikistan, Argentina, Yemen, Suriname, Afghanistan, Macedonia, Guatemala, Pakistan. A advanced logistics chains and a partnership network assist us to dispatch our products anywhere in the world immediately without discrediting product quality.
A specific source of dignity for FAMAGA is its team members, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the sphere of factory-made equipment.
All goods from FAMAGA are assured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that customers choose FAMAGA again and again, and we are glad to make more developed and technologically developed industrial equipment so as keep on top of it.
To consult or order, get in touch with us or send a message to the online chat on our site. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
|
|
Part Number | - | d | - | S |
WFSP3 UFSP20 | - - | 0.3 2.6 | - - | 10 498 |
Part Number | Wire Dia. dmm | S 1mm Increment | Reference Max. Deflection mm | Standard Spring Constant N/mm | Initial Tension N | ||||
Type | D | WFSP BWFSP | UFSP BUFSP | WFSP BWFSP | UFSP BUFSP | WFSP BWFSP | UFSP BUFSP | ||
WFSP UFSP BWFSP BUFSP | 3 | 0.3 | 10~300 | 88 | 87 | 0.025 | 0.021 | 0.18 | 0.21 |
0.4 | 41 | 42 | 0.12 | 0.10 | 0.53 | 0.64 | |||
4 | 0.4 | 86 | 87 | 0.04 | 0.04 | 0.31 | 0.38 | ||
0.5 | 48 | 46 | 0.15 | 0.13 | 0.77 | 0.92 | |||
5 | 0.5 | 10~500 | 84 | 82 | 0.07 | 0.06 | 0.49 | 0.59 | |
0.6 | 50 | 51 | 0.18 | 0.16 | 1.01 | 1.21 | |||
6 | 0.6 | 79 | 82 | 0.10 | 0.09 | 0.71 | 0.85 | ||
0.8 | 36 | 36 | 0.47 | 0.41 | 2.13 | 2.55 | |||
7 | 0.7 | 70 | 66 | 0.13 | 0.12 | 0.96 | 1.15 | ||
0.9 | 35 | 32 | 0.52 | 0.45 | 2.94 | 3.5 | |||
8 | 0.8 | 74 | 76 | 0.18 | 0.16 | 1.26 | 1.51 | ||
1.0 | 41 | 42 | 0.58 | 0.51 | 3.04 | 4.26 | |||
9 | 1.0 | 10~550 | 56 | 57 | 0.39 | 0.34 | 2.45 | 3.43 | |
1.2 | 33 | 33 | 1.05 | 0.93 | 4.41 | 6.17 | |||
10 | 1.0 | 74 | 70 | 0.27 | 0.24 | 1.96 | 2.74 | ||
1.2 | 44 | 43 | 0.73 | 0.65 | 4.31 | 6.03 | |||
1.4 | 29 | 28 | 1.70 | 1.50 | 7.64 | 10.7 | |||
11 | 1.0 | 80 | 76 | 0.20 | 0.17 | 1.45 | 2.01 | ||
1.2 | 46 | 45 | 0.53 | 0.47 | 3.24 | 4.51 | |||
1.4 | 31 | 30 | 1.24 | 1.08 | 6.39 | 8.87 | |||
12 | 1.0 | 116 | 113 | 0.15 | 0.13 | 1.18 | 1.65 | ||
1.2 | 71 | 70 | 0.39 | 0.35 | 2.84 | 3.98 | |||
1.4 | 46 | 46 | 0.91 | 0.80 | 5.39 | 7.55 | |||
1.6 | 31 | 30 | 1.88 | 1.66 | 8.72 | 12.21 | |||
13 | 1.0 | 120 | 117 | 0.11 | 0.10 | 0.93 | 1.29 | ||
1.2 | 72 | 71 | 0.31 | 0.27 | 2.17 | 3.01 | |||
1.4 | 47 | 47 | 0.70 | 0.61 | 3.95 | 5.49 | |||
1.6 | 32 | 31 | 1.42 | 1.24 | 7.75 | 10.76 | |||
14 | 1.2 | 104 | 96 | 0.24 | 0.21 | 2.06 | 2.88 | ||
1.4 | 69 | 65 | 0.54 | 0.48 | 3.82 | 5.35 | |||
1.6 | 47 | 45 | 1.11 | 0.98 | 6.66 | 9.32 | |||
1.8 | 34 | 33 | 2.10 | 1.86 | 10.6 | 14.84 | |||
15 | 1.2 | 106 | 98 | 0.19 | 0.17 | 1.50 | 2.09 | ||
1.4 | 70 | 66 | 0.43 | 0.38 | 3.03 | 4.21 | |||
1.6 | 48 | 46 | 0.88 | 0.76 | 4.74 | 6.59 | |||
1.8 | 35 | 34 | 1.69 | 1.47 | 9.25 | 12.85 | |||
16 | 1.4 | 96 | 91 | 0.35 | 0.31 | 3.04 | 4.26 | ||
1.6 | 66 | 65 | 0.71 | 0.63 | 5.10 | 7.14 | |||
1.8 | 48 | 47 | 1.33 | 1.18 | 8.33 | 11.66 | |||
2.0 | 34 | 35 | 2.37 | 2.10 | 12.60 | 17.64 | |||
17 | 1.4 | 97 | 92 | 0.29 | 0.25 | 2.21 | 3.08 | ||
1.6 | 67 | 66 | 0.58 | 0.50 | 4.03 | 5.60 | |||
1.8 | 49 | 48 | 1.11 | 0.97 | 6.74 | 9.37 | |||
2.0 | 35 | 36 | 1.98 | 1.73 | 10.90 | 15.13 | |||
18 | 1.6 | 88 | 87 | 0.48 | 0.42 | 4.02 | 5.63 | ||
1.8 | 64 | 64 | 0.90 | 0.80 | 6.47 | 9.06 | |||
2.0 | 47 | 48 | 1.59 | 1.40 | 10.00 | 14.00 | |||
2.3 | 31 | 30 | 3.40 | 3.01 | 18.70 | 26.18 | |||
20 | 1.8 | 84 | 78 | 0.63 | 0.56 | 5.10 | 7.14 | ||
2.0 | 61 | 60 | 1.11 | 0.99 | 7.94 | 11.12 | |||
2.3 | 41 | 40 | 2.37 | 2.10 | 15.20 | 21.28 | |||
2.6 | 29 | 29 | 4.64 | 4.10 | 23.60 | 33.04 | |||
22 | 2.0 | 75 | 74 | 0.81 | 0.72 | 7.35 | 10.30 | ||
2.3 | 53 | 52 | 1.72 | 1.52 | 11.80 | 16.50 | |||
2.6 | 37 | 37 | 3.35 | 2.96 | 19.60 | 27.40 | |||
2.9 | 27 | 27 | 6.09 | 5.39 | 33.30 | 46.60 | |||
25 | 2.3 | 72 | 72 | 1.12 | 0.99 | 9.80 | 13.70 | ||
2.6 | 50 | 52 | 2.17 | 1.92 | 15.70 | 22.00 | |||
2.9 | 38 | 36 | 3.93 | 3.48 | 22.50 | 31.50 | |||
3.2 | 28 | 27 | 6.75 | 5.97 | 34.30 | 48.00 | |||
28 | 2.6 | 69 | 64 | 1.49 | 1.32 | 12.70 | 17.80 | ||
2.9 | 51 | 49 | 2.69 | 2.38 | 17.60 | 24.60 | |||
3.2 | 39 | 37 | 4.58 | 4.05 | 27.40 | 38.40 | |||
3.5 | 31 | 29 | 7.49 | 6.62 | 39.20 | 54.90 |
D/d*1 | Tolerance |
8 or Less | �1.5% of D dimension (Min. �0.2mm) |
8~20 | �2% of D dimension (Min. �0.3mm) |