We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are inspecting MISUMI UFSP25-3.2-[10-550/1], catch up with FAMAGA, the world's main producer of manufacturing equipment. Our company has advanced for more than ten years - these are cycles of experience, which are represented in the quality of products and private attention to each consumer. We admire everyone, who joined with us - hence, our regular consumers procure the most favorable purchase terms and discounts on the factory-made equipment market. Nowadays, there are more than 3500 such purchasers, and we constantly form new agreements. More than 700 proceedings are resolved per day, because FAMAGA works all over the globe Germany, United Kingdom, South Africa, Myanmar, Paraguay, Bahrain, Gambia, Comoros, Djibouti, Philippines, Zambia, Angola, South Sudan, Macedonia, Eritrea, Bangladesh, Ukraine, Tonga, Tanzania, Bhutan, Iceland, Burkina Faso, Azerbaijan, Syria, Algeria, Qatar, Guatemala, Moldova, Austria, Turkmenistan, Malta, Equatorial Guinea, Latvia, Kazakhstan, Montenegro, Nepal, Australia, Turkey, Libya, Samoa, Antigua and Barbuda, Mauritania, New Zealand, Sudan, Senegal, Luxembourg, Israel, Brazil. A well-shaped logistics chains and a partnership network cheer us to send our elements anywhere in the earth with no delay without compromising product quality.
A specific source of repute for FAMAGA is its personnel, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the direction of machine made streamlined equipment.
All outcomes from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this amount is amounting every day. We are pleased that clients choose FAMAGA again and again, and we strive to make more exceptional and technologically modern industrial equipment so as to stay on the top.
To ask a question or book, phone us or write a message to the online chat on our official website. You can also direct a list of the needful equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
|
|
Part Number | - | d | - | S |
WFSP3 UFSP20 | - - | 0.3 2.6 | - - | 10 498 |
Part Number | Wire Dia. dmm | S 1mm Increment | Reference Max. Deflection mm | Standard Spring Constant N/mm | Initial Tension N | ||||
Type | D | WFSP BWFSP | UFSP BUFSP | WFSP BWFSP | UFSP BUFSP | WFSP BWFSP | UFSP BUFSP | ||
WFSP UFSP BWFSP BUFSP | 3 | 0.3 | 10~300 | 88 | 87 | 0.025 | 0.021 | 0.18 | 0.21 |
0.4 | 41 | 42 | 0.12 | 0.10 | 0.53 | 0.64 | |||
4 | 0.4 | 86 | 87 | 0.04 | 0.04 | 0.31 | 0.38 | ||
0.5 | 48 | 46 | 0.15 | 0.13 | 0.77 | 0.92 | |||
5 | 0.5 | 10~500 | 84 | 82 | 0.07 | 0.06 | 0.49 | 0.59 | |
0.6 | 50 | 51 | 0.18 | 0.16 | 1.01 | 1.21 | |||
6 | 0.6 | 79 | 82 | 0.10 | 0.09 | 0.71 | 0.85 | ||
0.8 | 36 | 36 | 0.47 | 0.41 | 2.13 | 2.55 | |||
7 | 0.7 | 70 | 66 | 0.13 | 0.12 | 0.96 | 1.15 | ||
0.9 | 35 | 32 | 0.52 | 0.45 | 2.94 | 3.5 | |||
8 | 0.8 | 74 | 76 | 0.18 | 0.16 | 1.26 | 1.51 | ||
1.0 | 41 | 42 | 0.58 | 0.51 | 3.04 | 4.26 | |||
9 | 1.0 | 10~550 | 56 | 57 | 0.39 | 0.34 | 2.45 | 3.43 | |
1.2 | 33 | 33 | 1.05 | 0.93 | 4.41 | 6.17 | |||
10 | 1.0 | 74 | 70 | 0.27 | 0.24 | 1.96 | 2.74 | ||
1.2 | 44 | 43 | 0.73 | 0.65 | 4.31 | 6.03 | |||
1.4 | 29 | 28 | 1.70 | 1.50 | 7.64 | 10.7 | |||
11 | 1.0 | 80 | 76 | 0.20 | 0.17 | 1.45 | 2.01 | ||
1.2 | 46 | 45 | 0.53 | 0.47 | 3.24 | 4.51 | |||
1.4 | 31 | 30 | 1.24 | 1.08 | 6.39 | 8.87 | |||
12 | 1.0 | 116 | 113 | 0.15 | 0.13 | 1.18 | 1.65 | ||
1.2 | 71 | 70 | 0.39 | 0.35 | 2.84 | 3.98 | |||
1.4 | 46 | 46 | 0.91 | 0.80 | 5.39 | 7.55 | |||
1.6 | 31 | 30 | 1.88 | 1.66 | 8.72 | 12.21 | |||
13 | 1.0 | 120 | 117 | 0.11 | 0.10 | 0.93 | 1.29 | ||
1.2 | 72 | 71 | 0.31 | 0.27 | 2.17 | 3.01 | |||
1.4 | 47 | 47 | 0.70 | 0.61 | 3.95 | 5.49 | |||
1.6 | 32 | 31 | 1.42 | 1.24 | 7.75 | 10.76 | |||
14 | 1.2 | 104 | 96 | 0.24 | 0.21 | 2.06 | 2.88 | ||
1.4 | 69 | 65 | 0.54 | 0.48 | 3.82 | 5.35 | |||
1.6 | 47 | 45 | 1.11 | 0.98 | 6.66 | 9.32 | |||
1.8 | 34 | 33 | 2.10 | 1.86 | 10.6 | 14.84 | |||
15 | 1.2 | 106 | 98 | 0.19 | 0.17 | 1.50 | 2.09 | ||
1.4 | 70 | 66 | 0.43 | 0.38 | 3.03 | 4.21 | |||
1.6 | 48 | 46 | 0.88 | 0.76 | 4.74 | 6.59 | |||
1.8 | 35 | 34 | 1.69 | 1.47 | 9.25 | 12.85 | |||
16 | 1.4 | 96 | 91 | 0.35 | 0.31 | 3.04 | 4.26 | ||
1.6 | 66 | 65 | 0.71 | 0.63 | 5.10 | 7.14 | |||
1.8 | 48 | 47 | 1.33 | 1.18 | 8.33 | 11.66 | |||
2.0 | 34 | 35 | 2.37 | 2.10 | 12.60 | 17.64 | |||
17 | 1.4 | 97 | 92 | 0.29 | 0.25 | 2.21 | 3.08 | ||
1.6 | 67 | 66 | 0.58 | 0.50 | 4.03 | 5.60 | |||
1.8 | 49 | 48 | 1.11 | 0.97 | 6.74 | 9.37 | |||
2.0 | 35 | 36 | 1.98 | 1.73 | 10.90 | 15.13 | |||
18 | 1.6 | 88 | 87 | 0.48 | 0.42 | 4.02 | 5.63 | ||
1.8 | 64 | 64 | 0.90 | 0.80 | 6.47 | 9.06 | |||
2.0 | 47 | 48 | 1.59 | 1.40 | 10.00 | 14.00 | |||
2.3 | 31 | 30 | 3.40 | 3.01 | 18.70 | 26.18 | |||
20 | 1.8 | 84 | 78 | 0.63 | 0.56 | 5.10 | 7.14 | ||
2.0 | 61 | 60 | 1.11 | 0.99 | 7.94 | 11.12 | |||
2.3 | 41 | 40 | 2.37 | 2.10 | 15.20 | 21.28 | |||
2.6 | 29 | 29 | 4.64 | 4.10 | 23.60 | 33.04 | |||
22 | 2.0 | 75 | 74 | 0.81 | 0.72 | 7.35 | 10.30 | ||
2.3 | 53 | 52 | 1.72 | 1.52 | 11.80 | 16.50 | |||
2.6 | 37 | 37 | 3.35 | 2.96 | 19.60 | 27.40 | |||
2.9 | 27 | 27 | 6.09 | 5.39 | 33.30 | 46.60 | |||
25 | 2.3 | 72 | 72 | 1.12 | 0.99 | 9.80 | 13.70 | ||
2.6 | 50 | 52 | 2.17 | 1.92 | 15.70 | 22.00 | |||
2.9 | 38 | 36 | 3.93 | 3.48 | 22.50 | 31.50 | |||
3.2 | 28 | 27 | 6.75 | 5.97 | 34.30 | 48.00 | |||
28 | 2.6 | 69 | 64 | 1.49 | 1.32 | 12.70 | 17.80 | ||
2.9 | 51 | 49 | 2.69 | 2.38 | 17.60 | 24.60 | |||
3.2 | 39 | 37 | 4.58 | 4.05 | 27.40 | 38.40 | |||
3.5 | 31 | 29 | 7.49 | 6.62 | 39.20 | 54.90 |
D/d*1 | Tolerance |
8 or Less | �1.5% of D dimension (Min. �0.2mm) |
8~20 | �2% of D dimension (Min. �0.3mm) |