We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are questing MISUMI UFSP22-2.0-[10-550/1], communicate with FAMAGA, the world's main producer of manufacturing equipment. Our company has advanced for more than ten years - these are years of experience, which are symbolized in the quality of items and particular attention to each consumer. We esteem everyone, who joined with us - so, our regular purchasers receive the most favorable purchase conditions and discounts on the factory-made equipment market. At this time, there are more than 3500 such buyers, and we constantly compose new agreements. More than 650 contracts are concluded per day, because FAMAGA operates all over the world Germany, United Kingdom, Dominican Republic, Madagascar, Lesotho, Fiji, Ghana, Nigeria, Andorra, Botswana, Cameroon, Jordan, Estonia, Gambia, Haiti, Cape Verde, United Arab Emirates, Togo, Honduras, Netherlands, Finland, Czech Republic, Angola, Algeria, Romania, Tanzania, Hungary, Mauritania, Indonesia, Russia, Cyprus, Tajikistan, Senegal, Brunei, Swaziland, Central African Republic, Dominica, Morocco, Latvia, Argentina, Croatia, Rwanda, Syria, Zimbabwe, Nepal, Zambia, Seychelles, Belarus. A well-elaborated logistics network and a partnership network allow us to dispatch our products anywhere in the planet immediately without damaging product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only experts, who already have experience in the sphere of manufacturing equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been delivered, and this number is rising every day. We are pleased that consumers choose FAMAGA again and again, and we are happy to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To ask a question or order, call us by phone or send a message to the online chat on our site. You can also direct a list of the needful equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
|
|
Part Number | - | d | - | S |
WFSP3 UFSP20 | - - | 0.3 2.6 | - - | 10 498 |
Part Number | Wire Dia. dmm | S 1mm Increment | Reference Max. Deflection mm | Standard Spring Constant N/mm | Initial Tension N | ||||
Type | D | WFSP BWFSP | UFSP BUFSP | WFSP BWFSP | UFSP BUFSP | WFSP BWFSP | UFSP BUFSP | ||
WFSP UFSP BWFSP BUFSP | 3 | 0.3 | 10~300 | 88 | 87 | 0.025 | 0.021 | 0.18 | 0.21 |
0.4 | 41 | 42 | 0.12 | 0.10 | 0.53 | 0.64 | |||
4 | 0.4 | 86 | 87 | 0.04 | 0.04 | 0.31 | 0.38 | ||
0.5 | 48 | 46 | 0.15 | 0.13 | 0.77 | 0.92 | |||
5 | 0.5 | 10~500 | 84 | 82 | 0.07 | 0.06 | 0.49 | 0.59 | |
0.6 | 50 | 51 | 0.18 | 0.16 | 1.01 | 1.21 | |||
6 | 0.6 | 79 | 82 | 0.10 | 0.09 | 0.71 | 0.85 | ||
0.8 | 36 | 36 | 0.47 | 0.41 | 2.13 | 2.55 | |||
7 | 0.7 | 70 | 66 | 0.13 | 0.12 | 0.96 | 1.15 | ||
0.9 | 35 | 32 | 0.52 | 0.45 | 2.94 | 3.5 | |||
8 | 0.8 | 74 | 76 | 0.18 | 0.16 | 1.26 | 1.51 | ||
1.0 | 41 | 42 | 0.58 | 0.51 | 3.04 | 4.26 | |||
9 | 1.0 | 10~550 | 56 | 57 | 0.39 | 0.34 | 2.45 | 3.43 | |
1.2 | 33 | 33 | 1.05 | 0.93 | 4.41 | 6.17 | |||
10 | 1.0 | 74 | 70 | 0.27 | 0.24 | 1.96 | 2.74 | ||
1.2 | 44 | 43 | 0.73 | 0.65 | 4.31 | 6.03 | |||
1.4 | 29 | 28 | 1.70 | 1.50 | 7.64 | 10.7 | |||
11 | 1.0 | 80 | 76 | 0.20 | 0.17 | 1.45 | 2.01 | ||
1.2 | 46 | 45 | 0.53 | 0.47 | 3.24 | 4.51 | |||
1.4 | 31 | 30 | 1.24 | 1.08 | 6.39 | 8.87 | |||
12 | 1.0 | 116 | 113 | 0.15 | 0.13 | 1.18 | 1.65 | ||
1.2 | 71 | 70 | 0.39 | 0.35 | 2.84 | 3.98 | |||
1.4 | 46 | 46 | 0.91 | 0.80 | 5.39 | 7.55 | |||
1.6 | 31 | 30 | 1.88 | 1.66 | 8.72 | 12.21 | |||
13 | 1.0 | 120 | 117 | 0.11 | 0.10 | 0.93 | 1.29 | ||
1.2 | 72 | 71 | 0.31 | 0.27 | 2.17 | 3.01 | |||
1.4 | 47 | 47 | 0.70 | 0.61 | 3.95 | 5.49 | |||
1.6 | 32 | 31 | 1.42 | 1.24 | 7.75 | 10.76 | |||
14 | 1.2 | 104 | 96 | 0.24 | 0.21 | 2.06 | 2.88 | ||
1.4 | 69 | 65 | 0.54 | 0.48 | 3.82 | 5.35 | |||
1.6 | 47 | 45 | 1.11 | 0.98 | 6.66 | 9.32 | |||
1.8 | 34 | 33 | 2.10 | 1.86 | 10.6 | 14.84 | |||
15 | 1.2 | 106 | 98 | 0.19 | 0.17 | 1.50 | 2.09 | ||
1.4 | 70 | 66 | 0.43 | 0.38 | 3.03 | 4.21 | |||
1.6 | 48 | 46 | 0.88 | 0.76 | 4.74 | 6.59 | |||
1.8 | 35 | 34 | 1.69 | 1.47 | 9.25 | 12.85 | |||
16 | 1.4 | 96 | 91 | 0.35 | 0.31 | 3.04 | 4.26 | ||
1.6 | 66 | 65 | 0.71 | 0.63 | 5.10 | 7.14 | |||
1.8 | 48 | 47 | 1.33 | 1.18 | 8.33 | 11.66 | |||
2.0 | 34 | 35 | 2.37 | 2.10 | 12.60 | 17.64 | |||
17 | 1.4 | 97 | 92 | 0.29 | 0.25 | 2.21 | 3.08 | ||
1.6 | 67 | 66 | 0.58 | 0.50 | 4.03 | 5.60 | |||
1.8 | 49 | 48 | 1.11 | 0.97 | 6.74 | 9.37 | |||
2.0 | 35 | 36 | 1.98 | 1.73 | 10.90 | 15.13 | |||
18 | 1.6 | 88 | 87 | 0.48 | 0.42 | 4.02 | 5.63 | ||
1.8 | 64 | 64 | 0.90 | 0.80 | 6.47 | 9.06 | |||
2.0 | 47 | 48 | 1.59 | 1.40 | 10.00 | 14.00 | |||
2.3 | 31 | 30 | 3.40 | 3.01 | 18.70 | 26.18 | |||
20 | 1.8 | 84 | 78 | 0.63 | 0.56 | 5.10 | 7.14 | ||
2.0 | 61 | 60 | 1.11 | 0.99 | 7.94 | 11.12 | |||
2.3 | 41 | 40 | 2.37 | 2.10 | 15.20 | 21.28 | |||
2.6 | 29 | 29 | 4.64 | 4.10 | 23.60 | 33.04 | |||
22 | 2.0 | 75 | 74 | 0.81 | 0.72 | 7.35 | 10.30 | ||
2.3 | 53 | 52 | 1.72 | 1.52 | 11.80 | 16.50 | |||
2.6 | 37 | 37 | 3.35 | 2.96 | 19.60 | 27.40 | |||
2.9 | 27 | 27 | 6.09 | 5.39 | 33.30 | 46.60 | |||
25 | 2.3 | 72 | 72 | 1.12 | 0.99 | 9.80 | 13.70 | ||
2.6 | 50 | 52 | 2.17 | 1.92 | 15.70 | 22.00 | |||
2.9 | 38 | 36 | 3.93 | 3.48 | 22.50 | 31.50 | |||
3.2 | 28 | 27 | 6.75 | 5.97 | 34.30 | 48.00 | |||
28 | 2.6 | 69 | 64 | 1.49 | 1.32 | 12.70 | 17.80 | ||
2.9 | 51 | 49 | 2.69 | 2.38 | 17.60 | 24.60 | |||
3.2 | 39 | 37 | 4.58 | 4.05 | 27.40 | 38.40 | |||
3.5 | 31 | 29 | 7.49 | 6.62 | 39.20 | 54.90 |
D/d*1 | Tolerance |
8 or Less | �1.5% of D dimension (Min. �0.2mm) |
8~20 | �2% of D dimension (Min. �0.3mm) |