We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
BUFSP3-0.4-[10-300/1]
Description
Tension Springs/Configurable Length
Stock availability:
On request
If you are questing MISUMI BUFSP3-0.4-[10-300/1], communicate with FAMAGA, the world's top supplier of mechanized equipment. Our company has functioned for more than ten years - these are ages of experience, which are symbolized in the quality of products and personalseparate attention to each client. We esteem everyone, who conspired with us - therefore, our regular purchasers bring in the most favorable purchase conditions and discounts on the industrial equipment market. Now, there are more than 4000 such consumers, and we constantly make new agreements. More than 650 affairs are settled per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Zambia, The Gambia, Mauritania, Colombia, Senegal, Sri Lanka, Paraguay, Dominican Republic, Turkey, Bosnia and Herzegovina, The Bahamas, Singapore, Netherlands, Mali, Togo, Philippines, Cameroon, Tonga, Cyprus, Malaysia, Jordan, Djibouti, Kuwait, Mongolia, Guatemala, Estonia, Turkmenistan, Morocco, Bulgaria, South Sudan, Vietnam, Botswana, Austria, Ecuador, Angola, Dominica, Belarus, Georgia, Serbia, Finland, Eswatini, Seychelles, Yemen. A well-built logistics link and a partnership network guide us to dispatch our products anywhere in the planet immediately without damaging product quality.
A specific source of good name for FAMAGA is its personnel, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the sphere of industrial equipment.
All spare parts from FAMAGA are guaranteed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this quantity is increasing every day. We are proud that buyers choose FAMAGA again and again, and we are happy to make more advanced and technologically advanced industrial equipment so as to stay on the top.
To get some advice or book, contact us or send a message to the online chat on our site. You can also direct a list of the needful equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
|
|
Part Number | - | d | - | S |
WFSP3 UFSP20 | - - | 0.3 2.6 | - - | 10 498 |
Part Number | Wire Dia. dmm | S 1mm Increment | Reference Max. Deflection mm | Standard Spring Constant N/mm | Initial Tension N | ||||
Type | D | WFSP BWFSP | UFSP BUFSP | WFSP BWFSP | UFSP BUFSP | WFSP BWFSP | UFSP BUFSP | ||
WFSP UFSP BWFSP BUFSP | 3 | 0.3 | 10~300 | 88 | 87 | 0.025 | 0.021 | 0.18 | 0.21 |
0.4 | 41 | 42 | 0.12 | 0.10 | 0.53 | 0.64 | |||
4 | 0.4 | 86 | 87 | 0.04 | 0.04 | 0.31 | 0.38 | ||
0.5 | 48 | 46 | 0.15 | 0.13 | 0.77 | 0.92 | |||
5 | 0.5 | 10~500 | 84 | 82 | 0.07 | 0.06 | 0.49 | 0.59 | |
0.6 | 50 | 51 | 0.18 | 0.16 | 1.01 | 1.21 | |||
6 | 0.6 | 79 | 82 | 0.10 | 0.09 | 0.71 | 0.85 | ||
0.8 | 36 | 36 | 0.47 | 0.41 | 2.13 | 2.55 | |||
7 | 0.7 | 70 | 66 | 0.13 | 0.12 | 0.96 | 1.15 | ||
0.9 | 35 | 32 | 0.52 | 0.45 | 2.94 | 3.5 | |||
8 | 0.8 | 74 | 76 | 0.18 | 0.16 | 1.26 | 1.51 | ||
1.0 | 41 | 42 | 0.58 | 0.51 | 3.04 | 4.26 | |||
9 | 1.0 | 10~550 | 56 | 57 | 0.39 | 0.34 | 2.45 | 3.43 | |
1.2 | 33 | 33 | 1.05 | 0.93 | 4.41 | 6.17 | |||
10 | 1.0 | 74 | 70 | 0.27 | 0.24 | 1.96 | 2.74 | ||
1.2 | 44 | 43 | 0.73 | 0.65 | 4.31 | 6.03 | |||
1.4 | 29 | 28 | 1.70 | 1.50 | 7.64 | 10.7 | |||
11 | 1.0 | 80 | 76 | 0.20 | 0.17 | 1.45 | 2.01 | ||
1.2 | 46 | 45 | 0.53 | 0.47 | 3.24 | 4.51 | |||
1.4 | 31 | 30 | 1.24 | 1.08 | 6.39 | 8.87 | |||
12 | 1.0 | 116 | 113 | 0.15 | 0.13 | 1.18 | 1.65 | ||
1.2 | 71 | 70 | 0.39 | 0.35 | 2.84 | 3.98 | |||
1.4 | 46 | 46 | 0.91 | 0.80 | 5.39 | 7.55 | |||
1.6 | 31 | 30 | 1.88 | 1.66 | 8.72 | 12.21 | |||
13 | 1.0 | 120 | 117 | 0.11 | 0.10 | 0.93 | 1.29 | ||
1.2 | 72 | 71 | 0.31 | 0.27 | 2.17 | 3.01 | |||
1.4 | 47 | 47 | 0.70 | 0.61 | 3.95 | 5.49 | |||
1.6 | 32 | 31 | 1.42 | 1.24 | 7.75 | 10.76 | |||
14 | 1.2 | 104 | 96 | 0.24 | 0.21 | 2.06 | 2.88 | ||
1.4 | 69 | 65 | 0.54 | 0.48 | 3.82 | 5.35 | |||
1.6 | 47 | 45 | 1.11 | 0.98 | 6.66 | 9.32 | |||
1.8 | 34 | 33 | 2.10 | 1.86 | 10.6 | 14.84 | |||
15 | 1.2 | 106 | 98 | 0.19 | 0.17 | 1.50 | 2.09 | ||
1.4 | 70 | 66 | 0.43 | 0.38 | 3.03 | 4.21 | |||
1.6 | 48 | 46 | 0.88 | 0.76 | 4.74 | 6.59 | |||
1.8 | 35 | 34 | 1.69 | 1.47 | 9.25 | 12.85 | |||
16 | 1.4 | 96 | 91 | 0.35 | 0.31 | 3.04 | 4.26 | ||
1.6 | 66 | 65 | 0.71 | 0.63 | 5.10 | 7.14 | |||
1.8 | 48 | 47 | 1.33 | 1.18 | 8.33 | 11.66 | |||
2.0 | 34 | 35 | 2.37 | 2.10 | 12.60 | 17.64 | |||
17 | 1.4 | 97 | 92 | 0.29 | 0.25 | 2.21 | 3.08 | ||
1.6 | 67 | 66 | 0.58 | 0.50 | 4.03 | 5.60 | |||
1.8 | 49 | 48 | 1.11 | 0.97 | 6.74 | 9.37 | |||
2.0 | 35 | 36 | 1.98 | 1.73 | 10.90 | 15.13 | |||
18 | 1.6 | 88 | 87 | 0.48 | 0.42 | 4.02 | 5.63 | ||
1.8 | 64 | 64 | 0.90 | 0.80 | 6.47 | 9.06 | |||
2.0 | 47 | 48 | 1.59 | 1.40 | 10.00 | 14.00 | |||
2.3 | 31 | 30 | 3.40 | 3.01 | 18.70 | 26.18 | |||
20 | 1.8 | 84 | 78 | 0.63 | 0.56 | 5.10 | 7.14 | ||
2.0 | 61 | 60 | 1.11 | 0.99 | 7.94 | 11.12 | |||
2.3 | 41 | 40 | 2.37 | 2.10 | 15.20 | 21.28 | |||
2.6 | 29 | 29 | 4.64 | 4.10 | 23.60 | 33.04 | |||
22 | 2.0 | 75 | 74 | 0.81 | 0.72 | 7.35 | 10.30 | ||
2.3 | 53 | 52 | 1.72 | 1.52 | 11.80 | 16.50 | |||
2.6 | 37 | 37 | 3.35 | 2.96 | 19.60 | 27.40 | |||
2.9 | 27 | 27 | 6.09 | 5.39 | 33.30 | 46.60 | |||
25 | 2.3 | 72 | 72 | 1.12 | 0.99 | 9.80 | 13.70 | ||
2.6 | 50 | 52 | 2.17 | 1.92 | 15.70 | 22.00 | |||
2.9 | 38 | 36 | 3.93 | 3.48 | 22.50 | 31.50 | |||
3.2 | 28 | 27 | 6.75 | 5.97 | 34.30 | 48.00 | |||
28 | 2.6 | 69 | 64 | 1.49 | 1.32 | 12.70 | 17.80 | ||
2.9 | 51 | 49 | 2.69 | 2.38 | 17.60 | 24.60 | |||
3.2 | 39 | 37 | 4.58 | 4.05 | 27.40 | 38.40 | |||
3.5 | 31 | 29 | 7.49 | 6.62 | 39.20 | 54.90 |
D/d*1 | Tolerance |
8 or Less | 1.5% of D dimension (Min. 0.2mm) |
8~20 | 2% of D dimension (Min. 0.3mm) |