We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
BUFSP13-1.2-[10-550/1]
Description
Tension Springs/Configurable Length
Stock availability:
On request
If you are questing MISUMI BUFSP13-1.2-[10-550/1], communicate with FAMAGA, the world's chief distributor of machine made equipment. Our company has existed for more than ten years - these are ages of experience, which are symbolized in the quality of items and particular attention to each user. We esteem everyone, who liased with us - so, our regular purchasers bring in the most flexible purchase conditions and discounts on the factory-made equipment market. Now, there are more than 4000 such consumers, and we constantly form new agreements. More than 650 affairs are settled per day, because FAMAGA supplies all over the world Germany, United Kingdom, Ghana, Peru, Sweden, Jamaica, Cuba, Sierra Leone, Slovenia, South Sudan, Bolivia, Qatar, Senegal, Burkina Faso, Samoa, Lithuania, Namibia, United States, Botswana, Mongolia, South Korea, Liechtenstein, Austria, Morocco, Tunisia, Seychelles, Macedonia, The Gambia, Fiji, Russia, North Korea, Cape Verde, Egypt, Yemen, Bosnia and Herzegovina, Cyprus, Armenia, Serbia, United Arab Emirates, Dominica, Albania, Mexico, Madagascar, Brazil, Haiti, Tonga. A advanced logistics connection and a partnership network help us to dispatch our units anywhere in the globe immediately without damaging product quality.
A special source of honor for FAMAGA is its personnel, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the field of manufacturing equipment.
All outputs from FAMAGA are affirmed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is amounting every day. We are happy that buyers choose FAMAGA again and again, and we are glad to make more progressive and technologically innovative industrial equipment so as not to lower the bar.
To get some advice or make a request, call us by phone or write a message to the online chat on our site. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
|
|
Part Number | - | d | - | S |
WFSP3 UFSP20 | - - | 0.3 2.6 | - - | 10 498 |
Part Number | Wire Dia. dmm | S 1mm Increment | Reference Max. Deflection mm | Standard Spring Constant N/mm | Initial Tension N | ||||
Type | D | WFSP BWFSP | UFSP BUFSP | WFSP BWFSP | UFSP BUFSP | WFSP BWFSP | UFSP BUFSP | ||
WFSP UFSP BWFSP BUFSP | 3 | 0.3 | 10~300 | 88 | 87 | 0.025 | 0.021 | 0.18 | 0.21 |
0.4 | 41 | 42 | 0.12 | 0.10 | 0.53 | 0.64 | |||
4 | 0.4 | 86 | 87 | 0.04 | 0.04 | 0.31 | 0.38 | ||
0.5 | 48 | 46 | 0.15 | 0.13 | 0.77 | 0.92 | |||
5 | 0.5 | 10~500 | 84 | 82 | 0.07 | 0.06 | 0.49 | 0.59 | |
0.6 | 50 | 51 | 0.18 | 0.16 | 1.01 | 1.21 | |||
6 | 0.6 | 79 | 82 | 0.10 | 0.09 | 0.71 | 0.85 | ||
0.8 | 36 | 36 | 0.47 | 0.41 | 2.13 | 2.55 | |||
7 | 0.7 | 70 | 66 | 0.13 | 0.12 | 0.96 | 1.15 | ||
0.9 | 35 | 32 | 0.52 | 0.45 | 2.94 | 3.5 | |||
8 | 0.8 | 74 | 76 | 0.18 | 0.16 | 1.26 | 1.51 | ||
1.0 | 41 | 42 | 0.58 | 0.51 | 3.04 | 4.26 | |||
9 | 1.0 | 10~550 | 56 | 57 | 0.39 | 0.34 | 2.45 | 3.43 | |
1.2 | 33 | 33 | 1.05 | 0.93 | 4.41 | 6.17 | |||
10 | 1.0 | 74 | 70 | 0.27 | 0.24 | 1.96 | 2.74 | ||
1.2 | 44 | 43 | 0.73 | 0.65 | 4.31 | 6.03 | |||
1.4 | 29 | 28 | 1.70 | 1.50 | 7.64 | 10.7 | |||
11 | 1.0 | 80 | 76 | 0.20 | 0.17 | 1.45 | 2.01 | ||
1.2 | 46 | 45 | 0.53 | 0.47 | 3.24 | 4.51 | |||
1.4 | 31 | 30 | 1.24 | 1.08 | 6.39 | 8.87 | |||
12 | 1.0 | 116 | 113 | 0.15 | 0.13 | 1.18 | 1.65 | ||
1.2 | 71 | 70 | 0.39 | 0.35 | 2.84 | 3.98 | |||
1.4 | 46 | 46 | 0.91 | 0.80 | 5.39 | 7.55 | |||
1.6 | 31 | 30 | 1.88 | 1.66 | 8.72 | 12.21 | |||
13 | 1.0 | 120 | 117 | 0.11 | 0.10 | 0.93 | 1.29 | ||
1.2 | 72 | 71 | 0.31 | 0.27 | 2.17 | 3.01 | |||
1.4 | 47 | 47 | 0.70 | 0.61 | 3.95 | 5.49 | |||
1.6 | 32 | 31 | 1.42 | 1.24 | 7.75 | 10.76 | |||
14 | 1.2 | 104 | 96 | 0.24 | 0.21 | 2.06 | 2.88 | ||
1.4 | 69 | 65 | 0.54 | 0.48 | 3.82 | 5.35 | |||
1.6 | 47 | 45 | 1.11 | 0.98 | 6.66 | 9.32 | |||
1.8 | 34 | 33 | 2.10 | 1.86 | 10.6 | 14.84 | |||
15 | 1.2 | 106 | 98 | 0.19 | 0.17 | 1.50 | 2.09 | ||
1.4 | 70 | 66 | 0.43 | 0.38 | 3.03 | 4.21 | |||
1.6 | 48 | 46 | 0.88 | 0.76 | 4.74 | 6.59 | |||
1.8 | 35 | 34 | 1.69 | 1.47 | 9.25 | 12.85 | |||
16 | 1.4 | 96 | 91 | 0.35 | 0.31 | 3.04 | 4.26 | ||
1.6 | 66 | 65 | 0.71 | 0.63 | 5.10 | 7.14 | |||
1.8 | 48 | 47 | 1.33 | 1.18 | 8.33 | 11.66 | |||
2.0 | 34 | 35 | 2.37 | 2.10 | 12.60 | 17.64 | |||
17 | 1.4 | 97 | 92 | 0.29 | 0.25 | 2.21 | 3.08 | ||
1.6 | 67 | 66 | 0.58 | 0.50 | 4.03 | 5.60 | |||
1.8 | 49 | 48 | 1.11 | 0.97 | 6.74 | 9.37 | |||
2.0 | 35 | 36 | 1.98 | 1.73 | 10.90 | 15.13 | |||
18 | 1.6 | 88 | 87 | 0.48 | 0.42 | 4.02 | 5.63 | ||
1.8 | 64 | 64 | 0.90 | 0.80 | 6.47 | 9.06 | |||
2.0 | 47 | 48 | 1.59 | 1.40 | 10.00 | 14.00 | |||
2.3 | 31 | 30 | 3.40 | 3.01 | 18.70 | 26.18 | |||
20 | 1.8 | 84 | 78 | 0.63 | 0.56 | 5.10 | 7.14 | ||
2.0 | 61 | 60 | 1.11 | 0.99 | 7.94 | 11.12 | |||
2.3 | 41 | 40 | 2.37 | 2.10 | 15.20 | 21.28 | |||
2.6 | 29 | 29 | 4.64 | 4.10 | 23.60 | 33.04 | |||
22 | 2.0 | 75 | 74 | 0.81 | 0.72 | 7.35 | 10.30 | ||
2.3 | 53 | 52 | 1.72 | 1.52 | 11.80 | 16.50 | |||
2.6 | 37 | 37 | 3.35 | 2.96 | 19.60 | 27.40 | |||
2.9 | 27 | 27 | 6.09 | 5.39 | 33.30 | 46.60 | |||
25 | 2.3 | 72 | 72 | 1.12 | 0.99 | 9.80 | 13.70 | ||
2.6 | 50 | 52 | 2.17 | 1.92 | 15.70 | 22.00 | |||
2.9 | 38 | 36 | 3.93 | 3.48 | 22.50 | 31.50 | |||
3.2 | 28 | 27 | 6.75 | 5.97 | 34.30 | 48.00 | |||
28 | 2.6 | 69 | 64 | 1.49 | 1.32 | 12.70 | 17.80 | ||
2.9 | 51 | 49 | 2.69 | 2.38 | 17.60 | 24.60 | |||
3.2 | 39 | 37 | 4.58 | 4.05 | 27.40 | 38.40 | |||
3.5 | 31 | 29 | 7.49 | 6.62 | 39.20 | 54.90 |
D/d*1 | Tolerance |
8 or Less | 1.5% of D dimension (Min. 0.2mm) |
8~20 | 2% of D dimension (Min. 0.3mm) |